Estimating Lithium-Ion Battery State of Charge and Parameters Using a Continuous-Discrete Extended Kalman Filter

A real-time determination of battery parameters is challenging because batteries are non-linear, time-varying systems. The transient behaviour of lithium-ion batteries is modelled by a Thevenin-equivalent circuit with two time constants characterising activation and concentration polarization. An experimental approach is proposed for directly determining battery parameters as a function of physical quantities. The model’s parameters are a function of the state of charge and of the discharge rate. These can be expressed by regression equations in the model to derive a continuous-discrete extended Kalman estimator of the state of charge and of other parameters. This technique is based on numerical integration of the ordinary differential equations to predict the state of the stochastic dynamic system and the corresponding error covariance matrix. Then a standard correction step of the extended Kalman filter (EKF) is applied to increase the accuracy of estimated parameters. Simulations resulting from this proposed estimator model were compared with experimental results under a variety of operating scenarios—analysis of the results demonstrate the accuracy of the estimator for correctly identifying battery parameters.

[1]  Min Chen,et al.  Accurate electrical battery model capable of predicting runtime and I-V performance , 2006, IEEE Transactions on Energy Conversion.

[2]  Qiujiang Liu,et al.  Evaluation of Acceptable Charging Current of Power Li-Ion Batteries Based on Polarization Characteristics , 2014, IEEE Transactions on Industrial Electronics.

[3]  정재식,et al.  A Multiscale Framework with Extended Kalman Filter for Lithium-Ion Battery SOC and Capacity Estimation , 2011 .

[4]  Mohammad Charkhgard,et al.  Design of adaptive H ∞ filter for implementing on state-of-charge estimation based on battery state-of-charge-varying modelling , 2015 .

[5]  Josep M. Guerrero,et al.  Industrial Applications of the Kalman Filter: A Review , 2013, IEEE Transactions on Industrial Electronics.

[6]  Christopher D. Rahn,et al.  Model-Based Electrochemical Estimation and Constraint Management for Pulse Operation of Lithium Ion Batteries , 2010, IEEE Transactions on Control Systems Technology.

[7]  Low Wen Yao,et al.  Modeling of Lithium Ion battery with nonlinear transfer resistance , 2011, 2011 IEEE Applied Power Electronics Colloquium (IAPEC).

[8]  Hongwen He,et al.  Evaluation of Lithium-Ion Battery Equivalent Circuit Models for State of Charge Estimation by an Experimental Approach , 2011 .

[9]  Stephen B. Bayne,et al.  Analysis of dual polarization battery model for grid applications , 2014, 2014 IEEE 36th International Telecommunications Energy Conference (INTELEC).

[10]  Joeri Van Mierlo,et al.  Lithium Ion Batteries—Development of Advanced Electrical Equivalent Circuit Models for Nickel Manganese Cobalt Lithium-Ion , 2016 .

[11]  Sung Hyun Yoon,et al.  State-of-charge estimation for lithium-ion battery pack using reconstructed open-circuit-voltage curve , 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

[12]  Christian Kral,et al.  Comparison of electrical battery models using a numerically optimized parameterization method , 2011, 2011 IEEE Vehicle Power and Propulsion Conference.

[13]  Fei Feng,et al.  A Combined State of Charge Estimation Method for Lithium-Ion Batteries Used in a Wide Ambient Temperature Range , 2014 .

[14]  Dirk Uwe Sauer,et al.  Comparative study of a structured neural network and an extended Kalman filter for state of health determination of lithium-ion batteries in hybrid electricvehicles , 2013, Eng. Appl. Artif. Intell..

[15]  Hongwen He,et al.  State-of-Charge Estimation of the Lithium-Ion Battery Using an Adaptive Extended Kalman Filter Based on an Improved Thevenin Model , 2011, IEEE Transactions on Vehicular Technology.

[16]  Andreas Jossen,et al.  Methods for state-of-charge determination and their applications , 2001 .

[17]  Fredrik Gustafsson,et al.  Discrete-Time Solutions to the Continuous-Time Differential Lyapunov Equation With Applications to Kalman Filtering , 2015, IEEE Transactions on Automatic Control.

[18]  Binggang Cao,et al.  The State of Charge Estimation of Lithium-Ion Batteries Based on a Proportional-Integral Observer , 2014, IEEE Transactions on Vehicular Technology.

[19]  Hongwen He,et al.  Online Estimation of Peak Power Capability of Li-Ion Batteries in Electric Vehicles by a Hardware-in-Loop Approach , 2012 .

[20]  Henk Jan Bergveld,et al.  Battery Management Systems: Accurate State-of-Charge Indication for Battery-Powered Applications , 2008 .

[21]  Min Xu,et al.  Estimation of State of Charge for Two Types of Lithium-Ion Batteries by Nonlinear Predictive Filter for Electric Vehicles , 2015 .

[22]  D. Sauer,et al.  Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. II: Modelling , 2011 .

[23]  Yi Lu Murphey,et al.  Battery state of charge estimation based on a combined model of Extended Kalman Filter and neural networks , 2011, The 2011 International Joint Conference on Neural Networks.

[24]  R. Spotnitz.  Simulation of capacity fade in lithium-ion batteries , 2003 .

[25]  M. V. Kulikova,et al.  Accurate Numerical Implementation of the Continuous-Discrete Extended Kalman Filter , 2014, IEEE Transactions on Automatic Control.

[26]  Jonghoon Kim,et al.  Stable Configuration of a Li-Ion Series Battery Pack Based on a Screening Process for Improved Voltage/SOC Balancing , 2012, IEEE Transactions on Power Electronics.

[27]  Suleiman M. Sharkh,et al.  Identification of dynamic model parameters for lithium-ion batteries used in hybrid electric vehicles , 2010 .

[28]  D. Sauer,et al.  Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. I. Experimental investigation , 2011 .

[29]  Hongwen He,et al.  Online model-based estimation of state-of-charge and open-circuit voltage of lithium-ion batteries in electric vehicles , 2012 .

[30]  Simo Särkkä,et al.  Gaussian filtering and smoothing for continuous-discrete dynamic systems , 2013, Signal Process..

[31]  Eung-Sang Kim,et al.  Modeling of Battery for EV using EMTP/ATPDraw , 2014 .

[32]  David A. Stone,et al.  Nonlinear observers for predicting state-of-charge and state-of-health of lead-acid batteries for hybrid-electric vehicles , 2005, IEEE Transactions on Vehicular Technology.

[33]  T. Kim,et al.  A Hybrid Battery Model Capable of Capturing Dynamic Circuit Characteristics and Nonlinear Capacity Effects , 2011, IEEE Transactions on Energy Conversion.

[34]  M. V. Kulikova,et al.  High-order accurate continuous-discrete extended Kalman filter for chemical engineering , 2015, Eur. J. Control.

[35]  C. Mi,et al.  A robust state-of-charge estimator for multiple types of lithium-ion batteries using adaptive extended Kalman filter , 2013 .

[36]  Kai Zhao,et al.  Evaluation on State of Charge Estimation of Batteries With Adaptive Extended Kalman Filter by Experiment Approach , 2013, IEEE Transactions on Vehicular Technology.