Effect of temperature on the material removal mechanism of LIPAA process

[1]  Feng Jiang,et al.  Anisotropy of material removal during laser-induced plasma assisted ablation of sapphire , 2022, Ceramics International.

[2]  T. Mukhopadhyay,et al.  Modified embedded-atom method interatomic potentials for Al-Cu, Al-Fe and Al-Ni binary alloys: From room temperature to melting point , 2022, Computational Materials Science.

[3]  Yongcheng Pan,et al.  Review on laser-induced etching processing technology for transparent hard and brittle materials , 2021, The International Journal of Advanced Manufacturing Technology.

[4]  L. Xie,et al.  Optical Quality Laser Polishing of CVD Diamond by UV Pulsed Laser Irradiation , 2021, Advanced Optical Materials.

[5]  F. Jiang,et al.  Deformation anisotropy of nano-scratching on C-plane of sapphire: A molecular dynamics study and experiment , 2021 .

[6]  Xipeng Xu,et al.  Molecular dynamics simulation of nanoindentation on c-plane sapphire , 2020 .

[7]  M. Hong,et al.  High-aspect-ratio crack-free microstructures fabrication on sapphire by femtosecond laser ablation , 2020 .

[8]  Y. Yue,et al.  Thermal behavior of materials in laser-assisted extreme manufacturing: Raman-based novel characterization , 2020, International Journal of Extreme Manufacturing.

[9]  Michael Schmidt,et al.  Cooling rate calibration and mapping of ultra-short pulsed laser modifications in fused silica by Raman and Brillouin spectroscopy , 2020, International Journal of Extreme Manufacturing.

[10]  Zhongwei Hu,et al.  Material removal mechanism of sapphire substrates with four crystal orientations by double-sided planetary grinding , 2020 .

[11]  Woo Kyun Kim,et al.  Nanoscale indentation and scratching tests of single crystal sapphire using molecular dynamics simulation , 2019 .

[12]  Vinh V. Le,et al.  Molecular dynamics simulation of phase transformation and mechanical behavior in Al2O3 model , 2019, Vacuum.

[13]  Ting Liang,et al.  In-plane thermal transport in black phosphorene/graphene layered heterostructures: a molecular dynamics study. , 2018, Physical chemistry chemical physics : PCCP.

[14]  Woo Kyun Kim,et al.  A molecular dynamics study on atomistic mechanisms of nano-scale cutting process of sapphire , 2017 .

[15]  O. Uteza,et al.  Importance of surface topography on pulsed laser-induced damage threshold of Sapphire crystals , 2017, Scientific Reports.

[16]  Junqin Shi,et al.  Effect of water film on the plastic deformation of monocrystalline copper , 2016 .

[17]  Kamal Choudhary,et al.  Charge optimized many-body (COMB) potential for Al2O3 materials, interfaces, and nanostructures , 2015, Journal of physics. Condensed matter : an Institute of Physics journal.

[18]  Kornel Ehmann,et al.  Laser-induced plasma in aqueous media: numerical simulation and experimental validation of spatial and temporal profiles. , 2014, Applied optics.

[19]  K. Ehmann,et al.  Multimaterial Capability of Laser Induced Plasma Micromachining , 2014 .

[20]  J. Houska,et al.  Pathway for a low-temperature deposition of α-Al2O3: A molecular dynamics study , 2013 .

[21]  A. Ansar,et al.  Laser etching rates of sapphire glass using metal targets , 2013 .

[22]  W. Sekkal,et al.  A modified embedded atom method for the corundum and the bixbyite forms of alumina: Bulk and surface studies , 2009 .

[23]  K. Sugioka,et al.  Transient electron excitation in laser-induced plasma-assisted ablation of transparent materials , 2006 .

[24]  K. Sugioka,et al.  Double-pulse irradiation by laser-induced plasma-assisted ablation (LIPAA) and mechanisms study , 2005 .

[25]  Koji Sugioka,et al.  Low resistivity glass metallization by laser induced plasma-assisted ablation , 2004, International Symposium on Laser Precision Microfabrication.

[26]  A. V. Duin,et al.  Adhesion and nonwetting-wetting transition in the Al/alpha-Al_2O_3 interface , 2004 .

[27]  T. Chong,et al.  Laser-induced plasma-assisted ablation and its applications , 2003 .

[28]  Yongfeng Lu,et al.  Diagnostics and real-time monitoring of pulsed laser ablation , 2002, International Symposium on Laser Precision Microfabrication.

[29]  J. Sanz,et al.  Molecular Dynamics Simulations of Pd Deposition on the α-Al2O3 (0001) Surface , 2001 .

[30]  Koji Sugioka,et al.  Laser-induced-plasma-assisted ablation for glass microfabrication , 2001, International Symposium on Photonics and Applications.

[31]  Koji Sugioka,et al.  Optical diagnostics in laser-induced plasma-assisted ablation of fused quartz , 2000, International Symposium on Laser Precision Microfabrication.

[32]  B. Dubreuil,et al.  A study of laser-produced copper plasma at reduced pressure for spectroscopic applications , 1995 .

[33]  F. Irons,et al.  Extreme ultra-violet spectra from laser-produced plasmas , 1966 .

[34]  C. T. Bodur,et al.  Molecular dynamics simulations of basal and pyramidal system edge dislocations in sapphire , 2005 .

[35]  M. Matsui,et al.  A Transferable Interatomic Potential Model for Crystals and Melts in the System CaO-MgO-Al2O3-SiO2 , 1994 .