DO-SCALDO design approach versus other split-rail, inductor-less DC-DC converter techniques

Split-rail power supplies are often used in modern electronic systems where dual-polarity voltages are required. Application areas such as portable devices, industrial and medical equipment where RFI/EMI issues and compact size are major concerns, alternative techniques are used as a replacement for inductor-based switching dual power supplies. This paper describes two such well-known inductor-less, split-rail power supply techniques based on the functionality, application scope, merit, and demerits while comparing them with the dual-output SCALDO technique. Two conventional methods are the op-amp based buffer circuit and the split-rail charge pump converter. Experimental results of a 12 V to ± 5 V DO-SCALDO technique is summarized to present the implementation aspects of the new technique.

[1]  Nihal Kularatna,et al.  Supercapacitors Improve the Performance of Linear Power-Management Circuits: Unique new design options when capacitance jump from micro-farads to farads with a low equivalent series resistance , 2016, IEEE Power Electronics Magazine.

[2]  J. Salmon,et al.  DC Voltage Analysis of a Single Switch Split DC-Rail Boost Converter Operated under Steady-State Unbalanced Load Conditions in Discontinuous Conduction , 2007, 2007 IEEE Power Electronics Specialists Conference.

[3]  Nihal Kularatna,et al.  Single-input, dual polarity, dual output DC-DC converter implementation based on the SCALDO technique , 2017, 2017 IEEE International Conference on Industrial Technology (ICIT).

[4]  Kalpani Kosala Gunawardane.  Analysis on Supercapacitor Assisted Low Dropout (SCALDO) Regulators , 2014 .

[5]  Ralph Monteiro,et al.  High Current Voltage Regulator Module Employs Novel Packaging Technology to Achieve Over 100A in a Compact Footprint to Power Next Generation Servers , 2002 .

[6]  Nihal Kularatna,et al.  Design concepts and preliminary implementations of dual output supercapacitor-assisted low-dropout regulators (DO-SCALDO) , 2016, 2016 Australasian Universities Power Engineering Conference (AUPEC).

[7]  J. Salmon,et al.  Output Voltage Regulation Curves for a 1-Switch Boost Converter Using Coupled Inductor Windings and Split DC-Rails Under Unbalanced Load Conditions , 2007, 2007 Canadian Conference on Electrical and Computer Engineering.

[8]  Nihal Kularatna.  Supercapacitor Assisted Low Dropout Regulators (SCALDO) for high efficiency DC-DC converters for DC microgrid applications , 2015, 2015 IEEE First International Conference on DC Microgrids (ICDCM).

[9]  Techniques For Implementing A Positive And Negative Output Voltage For Industrial And Medical Equipment , 2012 .

[10]  K. Kankanmage,et al.  Supercapacitor assisted LDO (SCALDO) techniquean extra low frequency design approach to high efficiency DC-DC converters and how it compares with the classical switched capacitor converters , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[11]  J. Salmon,et al.  A Single Switch Split DC-Rail Boost Converter Topology Operated Under Steady-State Unbalanced Load Conditions in Discontinuous Conduction , 2007, IEEE Transactions on Power Electronics.

[12]  Nihal Kularatna,et al.  Improving the End-to-End Efficiency of DC–DC Converters Based on a Supercapacitor-Assisted Low-Dropout Regulator Technique , 2014, IEEE Transactions on Industrial Electronics.

[13]  K. I. Hwu,et al.  Dual-output buck-boost converter with positive and negative output voltages under single positive voltage source fed , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[14]  Nyambayar Baatar,et al.  A dual-rail voltage supply for battery powered portable devices , 2010, 2010 IEEE Asia Pacific Conference on Circuits and Systems.

[15]  Ke-Horng Chen,et al.  Single-Inductor Multi-Output (SIMO) DC-DC Converters With High Light-Load Efficiency and Minimized Cross-Regulation for Portable Devices , 2009, IEEE Journal of Solid-State Circuits.

[16]  Nihal Kularatna,et al.  Laplace transform — Based theoretical foundations and experimental validation — Low frequency supercapacitor circulation technique for efficiency improvements in linear regulators , 2011 .

[17]  David Matousek.  Comparison of selected architectures of negative Charge Pumps with new design , 2014, 2014 24th International Conference Radioelektronika.

[18]  Shiho Kim,et al.  Charge recycling dual-Rail voltage supply for battery-Powered tags with sleep and active mode operation , 2013 .

[19]  Nihal Kularatna,et al.  Design of an efficiency improved dual-output DC-DC converter utilizing a supercapacitor circulation technique , 2016, 2016 IEEE 2nd Annual Southern Power Electronics Conference (SPEC).

[20]  Nihal Kularatna,et al.  Loss estimation and validation of the SCALDO implementation , 2015, 2015 IEEE 11th International Conference on Power Electronics and Drive Systems.