Detection of Deterioration of Three-phase Induction Motor using Vibration Signals

Abstract Nowadays detection of deterioration of electrical motors is an important topic of research. Vibration signals often carry diagnostic information of a motor. The authors proposed a setup for the analysis of vibration signals of three-phase induction motors. In this paper rotor fault diagnostic techniques of a three-phase induction motor (TPIM) were presented. The presented techniques used vibration signals and signal processing methods. The authors analyzed the recognition rate of vibration signal readings for 3 states of the TPIM: healthy TPIM, TPIM with 1 broken bar, and TPIM with 2 broken bars. In this paper the authors described a method of the feature extraction of vibration signals Method of Selection of Amplitudes of Frequencies – MSAF-12. Feature vectors were obtained using FFT, MSAF-12, and mean of vector sum. Three methods of classification were used: Nearest Neighbor (NN), Linear Discriminant Analysis (LDA), and Linear Support Vector Machine (LSVM). The obtained results of analyzed classifiers were in the range of 97.61 % – 100 %.

[1]  Jong-Myon Kim,et al.  Reliable multiple combined fault diagnosis of bearings using heterogeneous feature models and multiclass support vector Machines , 2018, Reliab. Eng. Syst. Saf..

[2]  Paweł Ewert.  Use of axial flux in the detection of electrical faults in induction motors , 2017, 2017 International Symposium on Electrical Machines (SME).

[3]  Adam Glowacz,et al.  Recognition of images of finger skin with application of histogram, image filtration and K-NN classifier , 2016 .

[4]  Anand Parey,et al.  Gearbox fault diagnosis using acoustic signals, continuous wavelet transform and adaptive neuro-fuzzy inference system , 2019, Applied Acoustics.

[5]  David Valis,et al.  The determination of combustion engine condition and reliability using oil analysis by MLP and RBF neural networks , 2017 .

[6]  Elias G. Strangas,et al.  On the Accuracy of Fault Detection and Separation in Permanent Magnet Synchronous Machines Using MCSA/MVSA and LDA , 2016, IEEE Transactions on Energy Conversion.

[7]  Hakan al.  Vibration and motor current analysis of induction motors to diagnose mechanical faults , 2014 .

[8]  Marcin Michalak,et al.  Monitoring and maintenance of a gantry based on a wireless system for measurement and analysis of the vibration level , 2019, Ekspolatacja i Niezawodnosc - Maintenance and Reliability.

[9]  Adam Glowacz,et al.  Diagnosis of the three-phase induction motor using thermal imaging , 2017 .

[10]  S. Mišák,et al.  Stator current and axial magnetic flux analysis of induction motor , 2018, 2018 International Conference on Diagnostics in Electrical Engineering (Diagnostika).

[11]  Paul Lukowicz,et al.  Generative Oversampling Method for Imbalanced Data on Bearing Fault Detection and Diagnosis , 2019, Applied Sciences.

[12]  Purushottam Gangsar,et al.  Diagnostics of mechanical and electrical faults in induction motors using wavelet-based features of vibration and current through support vector machine algorithms for various operating conditions , 2019, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[13]  Zhixiong Li,et al.  A new swarm intelligence optimized multiclass multi-kernel relevant vector machine: An experimental analysis in failure diagnostics of diesel engines , 2018 .

[14]  Suphattharachai Chomphan,et al.  VIBRATION SIGNAL ANALYSIS OF A MOTORCYCLE , 2019, International Journal of GEOMATE.

[15]  M. Salman Leong,et al.  Iterative variational mode decomposition and extreme learning machine for gearbox diagnosis based on vibration signals , 2019, Journal of Mechanical Engineering and Sciences.

[16]  Chao Zhang,et al.  A gearbox fault diagnosis method based on frequency-modulated empirical mode decomposition and support vector machine , 2018 .

[17]  Jong-Myon Kim,et al.  Fault Detection of a Spherical Tank Using a Genetic Algorithm-Based Hybrid Feature Pool and k-Nearest Neighbor Algorithm , 2019, Energies.

[18]  Aleena Swetapadma,et al.  A novel transmission line relaying scheme for fault detection and classification using wavelet transform and linear discriminant analysis , 2015 .

[19]  Qinkai Han,et al.  Vibration based condition monitoring and fault diagnosis of wind turbine planetary gearbox: A review , 2019, Mechanical Systems and Signal Processing.

[20]  Roger Dixon,et al.  Robustness Analysis of the FFT-based Segmentation, Feature Selection and Machine Fault Identification Algorithm , 2019, Insight - Non-Destructive Testing and Condition Monitoring.

[21]  Faliang Chang,et al.  A novel rolling-element bearing faults classification method combines lower-order moment spectra and support vector machine , 2019, Journal of Mechanical Science and Technology.

[22]  Hayde Peregrina-Barreto,et al.  Broken bar detection on squirrel cage induction motors with MCSA and EMD , 2014, 2014 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings.

[23]  Vicente Alarcon-Aquino,et al.  An Approach on MCSA-Based Fault Detection Using Independent Component Analysis and Neural Networks , 2019, IEEE Transactions on Instrumentation and Measurement.

[24]  Wenlong Fu,et al.  Fault Diagnosis for Rolling Bearings Based on Fine-Sorted Dispersion Entropy and SVM Optimized with Mutation SCA-PSO , 2019, Entropy.

[25]  Zhe Tian,et al.  Interference reduction of high-energy noise for modal parameter identification of offshore wind turbines based on iterative signal extraction , 2019, Ocean Engineering.

[26]  Qi Wang,et al.  A Diagnosis Method for Rotation Machinery Faults Based on Dimensionless Indexes Combined with -Nearest Neighbor Algorithm , 2015 .

[27]  Gerardo G. Acosta,et al.  Misalignment detection in induction motors with flexible coupling by means of estimated torque analysis and MCSA , 2016 .

[28]  Zhengbing Hu,et al.  Data science applications to improve accuracy of thermocouples , 2016, 2016 IEEE 8th International Conference on Intelligent Systems (IS).

[29]  Tomasz Ciszewski,et al.  Induction motor bearings diagnostic using MCSA and normalized tripple covariance , 2015, 2015 IEEE 10th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED).

[30]  L. A. Morales-Hernandez,et al.  Thermographic technique as a complement for MCSA in induction motor fault detection , 2014, 2014 International Conference on Electrical Machines (ICEM).

[31]  Yu-Min Hsueh,et al.  Induction Motors Condition Monitoring System with Fault Diagnosis Using a Hybrid Approach , 2019, Energies.

[32]  M. Sułowicz,et al.  Fault diagnosis of induction motors in selected working conditions based on axial flux signals , 2016 .

[33]  Wenkui Xi,et al.  A feature extraction and visualization method for fault detection of marine diesel engines , 2018 .

[34]  Wojciech Pietrowski.  Application of Radial Basis Neural Network to diagnostics of induction motor stator faults using axial flux , 2011 .

[35]  E Ebrahimi.  A Method Based on Support Vector Machine and Vibration Analysis for Fault Detection in Bevel Gears (Case Study: Differential) , 2019 .

[36]  Li Fengping,et al.  NC Machine Tools Fault Diagnosis Based on Kernel PCA and -Nearest Neighbor Using Vibration Signals , 2015 .