Evaluation of Pressure Free Nanoparticle Sintered Silver Die Attach on Silver and Gold Surfaces

A commercially available silver nanoparticle based die attach material was used in a pressure free process to bond 2.5 mm square Ag plated Si die to Ag and Au plated substrates. The two substrate types were 5mm square Ni/Ag plated silicon substrate and a W/Ni/Au metallised cofired alumina package. The assemblies were stored at 300 °C for up to 500 h and the morphology of the sintered Ag and the shear strength was monitored as a function of time. Bondline thickness measurements were carried out after following the paste manufacturer's drying and sintering temperature profile. On Ag substrate it was found that die shear strength increased with storage time. The fracture surfaces of the sheared die and substrate as well as cross sections of untested die were examined using electron microscopy. It was found that the Ag grains grew in size and porosity decreased over time. There was also a clear difference in morphology between sintered Ag at the die edge and centre. During shearing the Ni layer was found to s...