Tag diversity of inkjet printed body-worn radio frequency identification integrated medical sticking plasters for wireless monitoring

This Letter presents an investigation of radio frequency identification tags integrated with sticking plasters. Conductive ink is used in the fabrication to provide good compatibility with the plaster in terms of flexibility. The tag is proposed for use as a wireless platform for long-term patient monitoring in hospital environments. A motion capture system is used to test the directions in which the tag can be read to inform a diversity study establishing the number of tags required on-body to ensure reliable reading for applications such as medical monitoring. Tag diversity performance with various body movements is also studied. It is established that four tags give all round body coverage with only 4% loss in coverage for vertically polarised tags should one of them fail.

[1]  Simon L. Cotton,et al.  Improving signal reliability for indoor off-body communications using spatial diversity at the base station , 2014, The 8th European Conference on Antennas and Propagation (EuCAP 2014).

[2]  Sima Ajami,et al.  Radio Frequency Identification (RFID) technology and patient safety , 2013, Journal of research in medical sciences : the official journal of Isfahan University of Medical Sciences.

[3]  Apinunt Thanachayanont,et al.  Self-powered wireless temperature sensors exploit RFID technology , 2006, IEEE Pervasive Computing.

[4]  J.C. Batchelor,et al.  A prototype passive UHF RFID transfer tattoo tag , 2011, Proceedings of the 5th European Conference on Antennas and Propagation (EUCAP).

[5]  J. C. Batchelor,et al.  Animated human movement and posture capture for body worn antenna simulation , 2011, Proceedings of the 5th European Conference on Antennas and Propagation (EUCAP).

[6]  D. Al-Saffar,et al.  Human effect on on-body selective combining at 2.4 GHz , 2014, 2014 Loughborough Antennas and Propagation Conference (LAPC).

[7]  Gerald Holweg,et al.  Intelligent plaster for accurate body temperature monitoring and investigations regarding EMI using near-field magnetic scan , 2016, Elektrotech. Informationstechnik.

[8]  John C. Batchelor,et al.  Inkjet printed ECG electrodes for long term biosignal monitoring in personalized and ubiquitous healthcare , 2015, 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

[9]  G. Marrocco,et al.  Feasibility of Body-Centric Systems Using Passive Textile RFID Tags , 2012, IEEE Antennas and Propagation Magazine.

[10]  Danilo De Donno,et al.  Integration of UHF RFID and WSN technologies in healthcare systems , 2014, 2014 IEEE RFID Technology and Applications Conference (RFID-TA).

[11]  Roc Berenguer,et al.  Full Passive UHF Tag With a Temperature Sensor Suitable for Human Body Temperature Monitoring , 2010, IEEE Transactions on Circuits and Systems II: Express Briefs.

[12]  Fitri Yuli Zulkifli,et al.  An implanted dipole antenna for RFID-based patient monitoring system , 2013, 2013 International Conference on QiR.

[13]  Jing Wang,et al.  Exploiting dual-antenna diversity for phase cancellation in augmented RFID system , 2014, 2014 International Conference on Smart Communications in Network Technologies (SaCoNeT).

[14]  Hung-Min Sun,et al.  Design and implementation of wearable RFID tag for real-time ubiquitous medical care , 2014, 2014 IEEE Topical Conference on Biomedical Wireless Technologies, Networks, and Sensing Systems (BioWireleSS).

[15]  Linlin Hou,et al.  System-level design of an RFID sweat electrolyte sensor patch , 2014, 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[16]  J. C. Batchelor,et al.  UHF RFID tag antenna design for on-body applications , 2010, 2010 Loughborough Antennas & Propagation Conference.

[17]  J. Parron,et al.  Wearable RFID tag antenna for healthcare applications , 2015, 2015 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC).