Review of Incremental Forming of Sheet Metal Components
暂无分享,去创建一个
[1] Ghulam Hussain,et al. Electric hot incremental forming: A novel technique , 2008 .
[2] Eric Courteille,et al. Off-line compensation of the tool path deviations on robotic machining: Application to incremental sheet forming , 2013 .
[3] A. B. Bondarev,et al. Influence of anisotropy of the magnesium alloy AZ31 sheets on warm negative incremental forming , 2009 .
[4] A. Tekkaya,et al. A simple finite strain non-linear visco-plastic model for thermoplastics and its application to the simulation of incremental cold forming of polyvinylchloride (PVC) , 2013 .
[5] Ted Belytschko,et al. Mechanics of fracture in single point incremental forming , 2012 .
[6] Fabrizio Micari,et al. A force measuring based strategy for failure prevention in incremental forming , 2006 .
[7] Dongkai Xu,et al. Accumulative-DSIF strategy for enhancing process capabilities in incremental forming , 2012 .
[8] Jong Jin Park,et al. Formability of magnesium AZ31 sheet in the incremental forming at warm temperature , 2008 .
[9] Julian M. Allwood,et al. Incremental Forming of Sandwich Panels , 2007 .
[10] Nasir Hayat,et al. Tool and lubrication for negative incremental forming of a commercially pure titanium sheet , 2008 .
[11] Markus Bambach,et al. Incremental Sheet Forming - Process Simulation with LS-Dyna , 2007 .
[12] Paulo A.F. Martins,et al. Revisiting the fundamentals of single point incremental forming by means of membrane analysis , 2008 .
[13] Antonio Formisano,et al. Comparison between analytical and experimental roughness values of components created by incremental forming , 2010 .
[14] Antonio Formisano,et al. The influence of tool rotation on an incremental forming process , 2009 .
[15] Ghulam Hussain,et al. An experimental study on some formability evaluation methods in negative incremental forming , 2007 .
[16] Aldo Attanasio,et al. Asymmetric two points incremental forming: Improving surface quality and geometric accuracy by tool path optimization , 2008 .
[17] Markus Bambach,et al. A geometrical model of the kinematics of incremental sheet forming for the prediction of membrane strains and sheet thickness , 2010 .
[18] G. Hussain,et al. A new formability indicator in single point incremental forming , 2009 .
[19] Giuseppina Ambrogio,et al. An analytical model for improving precision in single point incremental forming , 2007 .
[20] Horst Meier,et al. Increasing the part accuracy in dieless robot-based incremental sheet metal forming , 2009 .
[21] I. Cerro,et al. Theoretical and experimental analysis of the dieless incremental sheet forming process , 2006 .
[22] Paul Vanherck,et al. Experimental study on force measurements for single point incremental forming , 2007 .
[23] Niels Bay,et al. Theory of single point incremental forming , 2008 .
[24] Aldo Attanasio,et al. Optimization of tool path in two points incremental forming , 2006 .
[25] Horst Meier,et al. Impact of superimposed pressure on dieless incremental sheet metal forming with two moving tools , 2011 .
[26] Ghulam Hussain,et al. An experimental study on the effect of thinning band on the sheet formability in negative incremental forming , 2008 .
[27] Jack Jeswiet,et al. Single Point Incremental Forming and the Forming Criteria for AA3003 , 2006 .
[28] Francesco Gagliardi,et al. Formability of lightweight alloys by hot incremental sheet forming , 2012 .
[29] Joost Duflou,et al. Experimental and numerical study of an AlMgSc sheet formed by an incremental process , 2011 .
[30] Matteo Strano,et al. Technological Representation of Forming Limits for Negative Incremental Forming of Thin Aluminum Sheets , 2005 .
[31] Joost Duflou,et al. Asymmetric single point incremental forming of sheet metal , 2005 .
[32] Naeem Ullah Dar,et al. A comparative study on the forming limits of an aluminum sheet-metal in negative incremental forming , 2007 .
[33] Nadhir Lebaal,et al. Tool path optimization for single point incremental sheet forming using response surface method , 2012, Simul. Model. Pract. Theory.
[34] Karl Kuzman,et al. Autonomous on-line system for fracture identification at incremental sheet forming , 2009 .
[35] A. Peteka,et al. Comparison of alternative approaches of single point incremental forming processes , 2009 .
[36] Jian Cao,et al. A new methodology for multi-pass single point incremental forming with mixed toolpaths , 2011 .
[37] Paulo A.F. Martins,et al. Single point incremental forming of polymers , 2009 .
[38] Paulo A.F. Martins,et al. Single point incremental forming of PVC , 2009 .
[39] N. Hayat,et al. The effect of variation in the curvature of part on the formability in incremental forming: An experimental investigation , 2007 .
[40] Changsheng Li,et al. Warm negative incremental forming of magnesium alloy AZ31 Sheet: New lubricating method , 2010 .
[41] W. C. Emmensa,et al. The technology of Incremental Sheet Forming – A brief review of the history , 2010 .
[42] A. H. van den Boogaard,et al. Incremental forming by continuous bending under tension—An experimental investigation , 2009 .
[43] S. Thibaud,et al. Influence of the initial grain size in single point incremental forming process for thin sheets metal and microparts: Experimental investigations , 2013 .