On mechanism design optimization for motion generation

A set of Burmester curves can represent an infinite number of planar four-bar motion generator solutions for a given series of prescribed rigid-body poses. Unfortunately, given such a vast number of possible mechanical solutions, it is difficult for designers to arbitrarily select a Burmester curve solution that ensures full link rotatability, produces feasible transmission angles and is as compact as possible. This work presents an algorithm for selecting planar four-bar motion generators with respect to Grashof conditions, transmission angle conditions and having the minimal perimeter value. This algorithm has been codified into MathCAD for enhanced analysis capabilities and ease of use. The example in this work demonstrates the synthesis of a compact planar, four-bar crank rocker motion generator with feasible transmission angles.

[1]  V. Cossalter,et al.  On the use of natural coordinates in optimal synthesis of mechanisms , 2000 .

[2]  E. Amezua,et al.  Nonlinear optimization of planar linkages for kinematic syntheses , 1995 .

[3]  L. Tsai,et al.  Kinematics and Optimization of a Spatial 3-UPU Parallel Manipulator , 2000 .

[4]  Vittore Cossalter,et al.  A simple numerical approach for optimum synthesis of a class of planar mechanisms , 1992 .

[5]  Clément Gosselin,et al.  Kinematic Analysis and Optimization of a New Three Degree-of-Freedom Spatial Parallel Manipulator , 2000 .

[6]  J. Angeles,et al.  Computation of all optimum dyads in the approximate synthesis of planar linkages for rigid-body guidance , 2000 .

[7]  F. Freudenstein.  Advanced mechanism design: Analysis and synthesis: Vol. 2, by G. N. Sandor and A. G. Erdman. Prentice-Hall Inc., Englewood Cliffs, New Jersey, 1984, 688 p , 1985 .

[8]  Sundar Krishnamurty,et al.  Optimal synthesis of mechanisms using nonlinear goal programming techniques , 1992 .

[9]  A. Smaili,et al.  Optimum Synthesis of Mechanisms Using Tabu-Gradient Search Algorithm , 2005 .

[10]  Eric Sandgren.  A multi-objective design tree approach for the optimization of mechanisms , 1990 .

[11]  A. C. Rao.  Synthesis of 4-bar function-generators using geometric programming , 1979 .

[12]  Bernard Yannou,et al.  Dimensional synthesis of planar mechanisms using neural networks: application to path generator linkages , 2001 .

[13]  Ramon Sancibrian,et al.  A general procedure based on exact gradient determination in dimensional synthesis of planar mechanisms , 2006 .

[14]  Roger Boudreau,et al.  Synthesis of Planar Parallel Mechanisms While Considering Workspace, Dexterity, Stiffness and Singularity Avoidance , 2006 .

[15]  F. T. S. Marı́n,et al.  Global optimization in path synthesis based on design space reduction , 2003 .

[16]  Jorge Angeles,et al.  Unconstrained nonlinear least-square optimization of planar linkages for rigid-body guidance , 1990 .

[17]  Arthur G. Erdman,et al.  A Method for Adjustable Planar and Spherical Four-Bar Linkage Synthesis , 2005 .

[18]  A. K Khare,et al.  Optimizing 4-bar crank-rocker mechanism , 1979 .

[19]  J. A. Cabrera,et al.  Optimal synthesis of mechanisms with genetic algorithms , 2002 .