Improvement of the mechanical durability of micro porous layer in a proton exchange membrane fuel cell by elimination of surface cracks

[1]  Bruno G. Pollet,et al.  Gas Diffusion Media and their Degradation , 2012 .

[2]  Kyoungdoug Min,et al.  Analysis of transient response of a unit proton-exchange membrane fuel cell with a degraded gas diff , 2011 .

[3]  Ki Tae Park,et al.  Numerical modeling and experimental study of the influence of GDL properties on performance in a PEMFC , 2011 .

[4]  Ki Tae Park,et al.  Determination of the pore size distribution of micro porous layer in PEMFC using pore forming agents under various drying conditions , 2010 .

[5]  Jinfeng Wu,et al.  In situ accelerated degradation of gas diffusion layer in proton exchange membrane fuel cell: Part I: Effect of elevated temperature and flow rate , 2010 .

[6]  S. Choi,et al.  Physical degradation of MEA in PEM fuel cell by on/off operation under nitrogen atmosphere , 2010 .

[7]  Paolo Emilio Santangelo,et al.  Fuel cell systems and traditional technologies. Part II: Experimental study on dynamic behavior of PEMFC in stationary power generation , 2009 .

[8]  B. Popov,et al.  Development of conducting polypyrrole as corrosion-resistant catalyst support for polymer electrolyte membrane fuel cell (PEMFC) application , 2009 .

[9]  Lim Kim,et al.  Degradation mechanism of electrocatalyst during long-term operation of PEMFC , 2009 .

[10]  Huamin Zhang,et al.  Electrochemical durability of gas diffusion layer under simulated proton exchange membrane fuel cell conditions , 2009 .

[11]  Jong-Hyun Lee,et al.  Degradation of proton exchange membrane by Pt dissolved/deposited in fuel cells , 2009 .

[12]  Jiujun Zhang,et al.  A review of accelerated stress tests of MEA durability in PEM fuel cells , 2009 .

[13]  Daniel Hissel,et al.  Analysis of a PEMFC durability test under low humidity conditions and stack behaviour modelling using experimental design techniques , 2008 .

[14]  EunAe Cho,et al.  Effects of MEA fabrication method on durability of polymer electrolyte membrane fuel cells , 2008 .

[15]  Wei-Hung Chen,et al.  Washing Experiment of the Gas Diffusion Layer in a Proton-Exchange Membrane Fuel Cell , 2008 .

[16]  Sanjeev Mukerjee,et al.  Degradation mechanism study of perfluorinated proton exchange membrane under fuel cell operating conditions , 2008 .

[17]  Geping Yin,et al.  Effect of carbon black support corrosion on the durability of Pt/C catalyst , 2007 .

[18]  Ibrahim Dincer,et al.  A preliminary life cycle assessment of PEM fuel cell powered automobiles , 2007 .

[19]  S. Jeong,et al.  Reduction of hydrogen peroxide production at anode of proton exchange membrane fuel cell under open-circuit conditions using ruthenium-carbon catalyst , 2007 .

[20]  Mu Pan,et al.  Porosity-graded micro-porous layers for polymer electrolyte membrane fuel cells , 2007 .

[21]  Walter Mérida,et al.  Gas diffusion layer durability under steady-state and freezing conditions , 2007 .

[22]  Mu Pan,et al.  Degradation behavior of membrane–electrode-assembly materials in 10-cell PEMFC stack , 2006 .

[23]  Manfred Waidhas,et al.  Low-cost air-cooled PEFC stacks , 2002 .

[24]  E. Auer,et al.  Characteristics of platinum-based electrocatalysts for mobile PEMFC applications , 1999 .