Correlation between Young’s modulus and impregnation quality of epoxy-impregnated SWCNT buckypaper

Abstract Carbon nanotube (CNT) sheets, also known as buckypaper, have high potential for structural applications due to their high volume fraction of CNT, the strongest and stiffest materials known. In this work, two different techniques, one based on positive pressure and another based on vacuum infiltration, are utilized to impregnate single-walled carbon nanotube (SWCNT) buckypaper sheets of 50–70 μm in thickness, resulting in a Young’s modulus of up to 15.4 GPa. Scanning electron microscopy demonstrates that the vacuum-based technique results in more effective impregnation of the buckypaper than the positive pressure technique. Thermogravimetry analysis of vacuum-impregnated specimens indicated a void content ranging from 5% to 32%. An advanced Mori–Tanaka-based micromechanics technique is also utilized to predict the effect of SWCNT volume fraction and void content on Young’s modulus of nanocomposites. These calculations suggest a higher void content of around 40% for the vacuum-impregnated composites.

[1]  C. Kingston,et al.  Efficient laser synthesis of single-walled carbon nanotubes through laser heating of the condensing vaporization plume , 2004 .

[2]  R. Byron Pipes,et al.  Self-Consistent Properties of Carbon Nanotubes and Hexagonal Arrays as Composite Reinforcements , 2003 .

[3]  L. Song,et al.  Processing and performance improvements of SWNT paper reinforced PEEK nanocomposites , 2007 .

[4]  Wolfram Knapp,et al.  Field-emission characteristics of carbon buckypaper , 2003 .

[5]  A. Rinzler,et al.  Carbon nanotube actuators , 1999, Science.

[6]  J. Coleman,et al.  Physical properties of novel free-standing polymer–nanotube thin films , 2006 .

[7]  Joselito M. Razal,et al.  Improving the mechanical properties of single-walled carbon nanotube sheets by intercalation of polymeric adhesives , 2003 .

[8]  Chuck Zhang,et al.  Mechanical and electrical properties of polycarbonate nanotube buckypaper composite sheets , 2008, Nanotechnology.

[9]  Ben Wang,et al.  Processing and property investigation of single-walled carbon nanotube (SWNT) buckypaper/epoxy resin matrix nanocomposites , 2004 .

[10]  G. R. Webster,et al.  Ultrafast depolarization of the fluorescence in a conjugated polymer , 2005 .

[11]  H. L. Cox.  The elasticity and strength of paper and other fibrous materials , 1952 .

[12]  M. Panhuis,et al.  Reinforcement of macroscopic carbon nanotube structures by polymer intercalation: The role of polymer molecular weight and chain conformation , 2005 .

[13]  Satish Kumar,et al.  Properties and Structure of Nitric Acid Oxidized Single Wall Carbon Nanotube Films , 2004 .

[14]  Ben Wang,et al.  High Mechanical Performance Composite Conductor: Multi‐Walled Carbon Nanotube Sheet/Bismaleimide Nanocomposites , 2009 .

[15]  B. Ashrafi,et al.  Carbon nanotube-reinforced composites as structural materials for microactuators in microelectromechanical systems , 2006 .

[16]  M. Meyyappan,et al.  Gas Permeability of a Buckypaper Membrane , 2003 .

[17]  Satish Nagarajaiah,et al.  Nanotube film based on single-wall carbon nanotubes for strain sensing , 2004 .

[18]  K. Tanaka,et al.  Average stress in matrix and average elastic energy of materials with misfitting inclusions , 1973 .

[19]  Geoffrey M. Spinks,et al.  Mechanical properties of carbon nanotube paper in ionic liquid and aqueous electrolytes , 2005 .

[20]  Ann Marie Sastry,et al.  Mechanical properties of nanotube sheets: Alterations in joint morphology and achievable moduli in manufacturable materials , 2004 .

[21]  A. Krasheninnikov,et al.  Carbon nanotube mats and fibers with irradiation-improved mechanical characteristics: a theoretical model. , 2004, Physical review letters.

[22]  Elastic Characterization of SWNT-Reinforced Polymer Thin Films Using a Nanoindener-Based Bending Test , 2008 .

[23]  C. Kingston,et al.  Recent advances in laser synthesis of single-walled carbon nanotubes. , 2006, Journal of nanoscience and nanotechnology.

[24]  M. Balkanski,et al.  Elastic properties of crystals of single-walled carbon nanotubes , 2000 .

[25]  Ben Wang,et al.  Controlled nanostructure and high loading of single-walled carbon nanotubes reinforced polycarbonate composite , 2007 .