A supersaturated Cu-Ag nanoalloy joint with ultrahigh shear strength and ultrafine nanoprecipitates for power electronic packaging

[1]  K. Suganuma,et al.  Supersaturated solid-solution interfaces of Cu core/Ag shell structures with enhanced thermal stability and oxidation resistance , 2022, Corrosion Science.

[2]  H. Ye,et al.  Microstructural evolution, fracture behavior and bonding mechanisms study of copper sintering on bare DBC substrate for SiC power electronics packaging , 2022, Journal of Materials Research and Technology.

[3]  B. Zhang,et al.  Stress corrosion cracking resistant nanostructured Al-Mg alloy with low angle grain boundaries , 2021, Acta Materialia.

[4]  D. Raabe,et al.  Superior mechanical properties of a selective-laser-melted AlZnMgCuScZr alloy enabled by a tunable hierarchical microstructure and dual-nanoprecipitation , 2021, Materials Today.

[5]  Jong-Hyun Lee,et al.  Die sinter bonding in air using Cu@Ag particulate preform and rapid formation of near-full density bondline , 2021 .

[6]  P. He,et al.  Sintering Bonding of SiC Particulate Reinforced Aluminum Metal Matrix Composites by Using Cu Nanoparticles and Liquid Ga in Air , 2021, Nanomaterials.

[7]  Saurabh Khuje,et al.  Recent Advancement of Emerging Nano Copper-Based Printable Flexible Hybrid Electronics. , 2021, ACS nano.

[8]  Jianfeng Yan.  A Review of Sintering-Bonding Technology Using Ag Nanoparticles for Electronic Packaging , 2021, Nanomaterials.

[9]  K. Paik,et al.  Highly mechanical and high-temperature properties of Cu–Cu joints using citrate-coated nanosized Ag paste in air , 2021 .

[10]  F. F. Chamasemani,et al.  Multi-method characterization approach to facilitate a strategy to design mechanical and electrical properties of sintered copper , 2021 .

[11]  G. Zou,et al.  Sintering mechanism of supersaturated Ag-Cu nanoalloy film for power electronic packaging. , 2020, ACS applied materials & interfaces.

[12]  E. Meletis,et al.  Corrosion study of brazing Cu Ag alloy in the presence of benzotriazole inhibitor , 2019 .

[13]  Wenjun Lu,et al.  Evidence for Ag participating the electrochemical migration of 96.5Sn-3Ag-0.5Cu alloy , 2019, Corrosion Science.

[14]  Xiaofeng Dai,et al.  Room temperature sintering of Cu-Ag core-shell nanoparticles conductive inks for printed electronics , 2019, Chemical Engineering Journal.

[15]  Hongjun Ji,et al.  Size-Dependent Phase Transformation during Gas Atomization Process of Cu–Sn Alloy Powders , 2019, Materials.

[16]  Daoguo Yang,et al.  Silver nanopaste: Synthesis, reinforcements and application , 2018, International Journal of Heat and Mass Transfer.

[17]  R. Tummala,et al.  Review of Thermal Packaging Technologies for Automotive Power Electronics for Traction Purposes , 2018 .

[18]  Mingyu Li,et al.  Ultra-low temperature sintering of Cu@Ag core-shell nanoparticle paste by ultrasonic in air for high-temperature power device packaging. , 2018, Ultrasonics sonochemistry.

[19]  Katsuaki Suganuma,et al.  Printable and Flexible Copper-Silver Alloy Electrodes with High Conductivity and Ultrahigh Oxidation Resistance. , 2017, ACS applied materials & interfaces.

[20]  Hongjun Ji,et al.  Rapid formation of intermetallic joints through ultrasonic-assisted die bonding with Sn–0.7Cu solder for high temperature packaging application , 2016 .

[21]  Jie Yu,et al.  Bimodal sintered silver nanoparticle paste with ultrahigh thermal conductivity and shear strength for high temperature thermal interface material applications. , 2015, ACS applied materials & interfaces.

[22]  O. Fornaro,et al.  Thermal properties of Sn-based solder alloys , 2014, Journal of Materials Science: Materials in Electronics.

[23]  Liangliang Li,et al.  Silver nanoparticle-based thermal interface materials with ultra-low thermal resistance for power electronics applications , 2012 .

[24]  B. Devincre,et al.  Orowan strengthening at low temperatures in bcc materials studied by dislocation dynamics simulations , 2011 .

[25]  Jooho Moon,et al.  Synthesis and size control of monodisperse copper nanoparticles by polyol method. , 2007, Journal of colloid and interface science.