Compressive properties of functionally graded lattice structures manufactured by selective laser melting

[1]  R. Hague,et al.  An investigation into reinforced and functionally graded lattice structures , 2017 .

[2]  R. Hague,et al.  A mechanical property evaluation of graded density Al-Si10-Mg lattice structures manufactured by selective laser melting , 2016 .

[3]  Stefanie Feih,et al.  Failure and energy absorption characteristics of advanced 3D truss core structures , 2016 .

[4]  Chee Kai Chua,et al.  An experimental and simulation study on build thickness dependent microstructure for electron beam melted Ti–6Al–4V , 2015 .

[5]  Stefanie Feih,et al.  Performance of bio-inspired Kagome truss core structures under compression and shear loading , 2014 .

[6]  Tomasz Durejko,et al.  Thin wall tubes with Fe3Al/SS316L graded structure obtained by using laser engineered net shaping technology , 2014 .

[7]  Gwendolen C. Reilly,et al.  Fabrication and Mechanical Characterisation of Titanium Lattices with Graded Porosity , 2014 .

[8]  Mark Stanford,et al.  An investigation into the flexural characteristics of functionally graded cobalt chrome femoral stems manufactured using selective laser melting , 2014 .

[9]  Thomas Tröster,et al.  Functionally Graded Alloys Obtained by Additive Manufacturing , 2014 .

[10]  Xin-chun Zhang,et al.  Dynamic crushing behavior and energy absorption of honeycombs with density gradient , 2014 .

[11]  S. Qianqian,et al.  Fabrication and characterisation of functional gradient hydroxyapatite reinforced poly (ether ether ketone) biocomposites , 2013 .

[12]  S. Raman,et al.  A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications , 2011 .

[13]  C K Chua,et al.  Investigation of the mechanical properties and porosity relationships in selective laser-sintered polyhedral for functionally graded scaffolds. , 2011, Acta biomaterialia.

[14]  Merve Erdal,et al.  Manufacturing of Functionally Graded Porous Products by Selective Laser Sintering , 2009 .

[15]  Likai Shi,et al.  Characterization of laser powder deposited Ti–TiC composites and functional gradient materials , 2008 .

[16]  David C. Dunand,et al.  Mechanical properties of a density-graded replicated aluminum foam , 2008 .

[17]  Haseung Chung,et al.  Functionally graded Nylon-11/silica nanocomposites produced by selective laser sintering , 2008 .

[18]  W. Yeong,et al.  Engineering functionally graded tissue engineering scaffolds. , 2008, Journal of the mechanical behavior of biomedical materials.

[19]  Matthias Busse,et al.  Computer Based Porosity Design by Multi Phase Topology Optimization , 2008 .

[20]  Kamran Mumtaz,et al.  Laser melting functionally graded composition of Waspaloy® and Zirconia powders , 2007 .

[21]  M. Ashby.  The properties of foams and lattices , 2006, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[22]  Amit Bandyopadhyay,et al.  Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling , 2003 .

[23]  Marc A. Meyers,et al.  Shear localization in dynamic deformation of materials: microstructural evolution and self-organization , 2001 .

[24]  A. Kawasaki,et al.  Functionally graded materials : design, processing and applications , 1999 .

[25]  J. T. Hammer,et al.  Plastic Deformation and Ductile Fracture of Ti-6Al-4V under Various Loading Conditions , 2012 .

[26]  楼松年,et al.  Investigation on gradient material fabrication with electron beam melting based on scanning track control , 2007 .

[27]  Chi Feng Lin,et al.  Plastic deformation and fracture behaviour of Ti–6Al–4V alloy loaded with high strain rate under various temperatures , 1998 .

[28]  Akira Kawasaki,et al.  Worldwide trends in functional gradient materials research and development , 1994 .

[29]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .