Integration of field, laboratory, and modeling aspects of acid fracturing: A comprehensive review

Abstract Acid fracture is a widely applied stimulation technique in carbonate formations; however, it has yet to be fully engineered. A holistic approach was taken in this study to improve the general understating of acid fracture from the field, laboratory, and modeling perspectives. Fully integrating these three elements is imperative to enhancing the performance of acid-fractured wells. The comprehensive review provided in this study will reduce the gap between job execution outcomes and acid fracture model predictions, a goal that is unattainable without knowledge of acid fracture fluid properties, potentials, and limitations. Such an understanding can be obtained from laboratory studies, as well as from job execution results. Obtaining accurate descriptions of the fluid and rock properties encountered during operation is essential. For instance, an experimental approach is applied to obtain the reaction kinetics, diffusion coefficients, and acid fracture conductivity. These, along with the fluid loss coefficient and pressure data obtained from field operations, are valuable modeling inputs. This study sheds light on improvements in acid fracture modeling capabilities made during the past several decades, as well as limitations in terms of capturing some of the fundamental physical phenomena occurring during the process of acid fracture. Essentially, a model that can predict stimulation outcomes can be used to improve the design.

[1]  M. Mahmoud.  Determination of the optimum wormholing conditions in carbonate acidizing using NMR , 2017 .

[2]  H. Nasr-El-Din,et al.  A Novel Pore-Scale Thermal-Fracture-Acidizing Model With Heterogeneous Rock Properties , 2016 .

[3]  A. Gomaa,et al.  Engineering Solid Particulate Diverter to Control Fracture Complexity: Experimental Study , 2016 .

[4]  Manu Sharma,et al.  Constraints on Upward Migration of Hydraulic Fracturing Fluid and Brine , 2013, Ground water.

[5]  J. Guin,et al.  A New Method for Predicting Acid Penetration Distance , 1975 .

[6]  A. Hill,et al.  Droplet Size Analysis of Emulsified Acid , 2009 .

[7]  M. Marongiu-Porcu,et al.  Optimization of Acid Fracturing with Unified Fracture Design , 2015 .

[8]  M. Pournik.  Laboratory-scale fracture conductivity created by acid etching , 2008 .

[9]  A. Hill,et al.  Development of Acid Fracturing Model for Naturally Fractured Reservoirs , 2018, SPE Production & Operations.

[10]  Yonghui Wang,et al.  Propped Fracturing with a Novel Surface Cross-linked Acid in High Temperature Deep Carbonate Formation , 2010 .

[11]  Tadesse Weldu Teklu,et al.  Effect of Dilute Acid on Hydraulic Fracturing of Carbonate Rich Shales – Experimental Study , 2017 .

[12]  A. Hill,et al.  Acid Fracturing Carbonate-Rich Shale: A Feasibility Investigation of Eagle Ford Formation , 2016 .

[13]  Mohammed Al-Ghazal,et al.  Eco-Friendly Hydraulic Fracturing Fluid: Field Deployment and Performance Evaluation in Saudi Arabia's Tight Gas Reservoirs , 2016 .

[14]  W. Ellsworth.  Injection-Induced Earthquakes , 2013, Science.

[15]  D. R. Wieland,et al.  The Effect of Flow on Acid Reactivity in a Carbonate Fracture , 1962 .

[16]  Cong Lu,et al.  New study of etching patterns of acid-fracture surfaces and relevant conductivity , 2017 .

[17]  Ataur R. Malik,et al.  Successful Implementation of CO2 Energized Acid Fracturing Treatment in Deep, Tight and Sour Carbonate Gas Reservoir in Saudi Arabia that Reduced Fresh Water Consumption and Enhanced Well Performance , 2014 .

[18]  A. Hill,et al.  The Effect of Wormholing on the Fluid Loss Coefficient in Acid Fracturing , 1995 .

[19]  Alfred Daniel Hill,et al.  The Effects of Acid Contact Time and the Resulting Weakening of the Rock Surfaces on Acid Fracture Conductivity , 2007 .

[20]  W. Dreybrodt,et al.  Early development of Karst aquifers on percolation networks of fractures in limestone , 1998 .

[21]  Samantha L Malone,et al.  Assessment of effluent contaminants from three facilities discharging Marcellus Shale wastewater to surface waters in Pennsylvania. , 2013, Environmental science & technology.

[22]  S. E. Fredrickson,et al.  Dynamic Etching Tests And Their Use In Planning Acid Treatments , 1968 .

[23]  A. W. Coulter,et al.  Mathematical Model Simulates Actual Well Conditions In Fracture Acidizing Treatment Design , 1974 .

[24]  A. Hill,et al.  Modeling of the Acidizing Process in Naturally Fractured Carbonates , 2002 .

[25]  Yan Li,et al.  An Overview of Current Acid Fracturing Technology With Recent Implications for Emulsified Acids , 1993 .

[26]  Alfred Daniel Hill,et al.  Acid etching patterns in naturally-fractured formations , 1999 .

[27]  D. E. Nierode,et al.  An Evaluation of Acid Fluid Loss Additives Retarded Acids, and Acidized Fracture Conductivity , 1973 .

[28]  A. Hill,et al.  Acid Fracturing Productivity Model for Naturally Fractured Carbonate Reservoirs , 2018, Day 1 Tue, October 16, 2018.

[29]  Henry J. Ramey,et al.  Thermal injection well falloff testing , 1981 .

[30]  A. Hill,et al.  The Effects of Initial Condition of Fracture Surfaces, Acid Spending and Acid Type on Conductivity of Acid Fracture , 2014 .

[31]  Dae-Sung Cheon,et al.  Breakdown pressure and fracture surface morphology of hydraulic fracturing in shale with H2O, CO2 and N2 , 2016 .

[32]  Robert C. Burton,et al.  A Comprehensive Model of High-Rate Matrix-Acid Stimulation for Long Horizontal Wells in Carbonate Reservoirs: Part I--Scaling Up Core-Level Acid Wormholing to Field Treatments , 2012 .

[33]  Hisham A. Nasr-El-Din,et al.  Evaluation of Environmentally Friendly Chelating Agents for Applications in the Oil and Gas Industry , 2014 .

[34]  A. S. Berman.  Laminar Flow in Channels with Porous Walls , 1953 .

[35]  S. Aribo,et al.  Green inhibitors for corrosion protection in acidizing oilfield environment , 2017 .

[36]  M. Pournik,et al.  Effect of Acid on Productivity of Fractured Shale Reservoirs , 2014 .

[37]  Marten Adriaan Buijse,et al.  A Semi-Empirical Model To Calculate Wormhole Growth in Carbonate Acidizing , 2005 .

[38]  E. Mohtarami,et al.  The etching and hydraulic conductivity of acidized rough fractures , 2018, Journal of Petroleum Science and Engineering.

[39]  Z. Rahim.  Technology Focus: Hydraulic Fracturing (March 2018) , 2018 .

[40]  George E. King,et al.  Hydraulic Fracturing 101: What Every Representative, Environmentalist, Regulator, Reporter, Investor, University Researcher, Neighbor and Engineer Should Know About Estimating Frac Risk and Improving Frac Performance in Unconventional Gas and Oil Wells , 2012 .

[41]  H. S. Fogler,et al.  Fluid-velocity and reaction-rate effects during carbonate acidizing: application of network model , 1989 .

[42]  B. B. Williams,et al.  Design of Acid Fracturing Treatments , 1972 .

[43]  R. S. Schechter,et al.  Optimization of Vertical Acid Fractures in Steady-State Flow , 1987 .

[44]  H. Nasr-El-Din,et al.  Evaluation of a New Environmentally Friendly Chelating Agent for High-Temperature Applications , 2011 .

[45]  L. R. Raymond,et al.  Productivity of wells in vertically fractured, damaged formations , 1967 .

[46]  Mirajuddin R. Khan,et al.  Acid Fracturing or Proppant Fracturing in Carbonate Formation? A Rock Mechanics View , 2006 .

[47]  Elizabeth McCartney,et al.  Enhanced Acid Fracturing with Improved Fluid Loss Control and Near Wellbore Diversion Increases Production in Kuwait , 2017 .

[48]  New correlations to predict fracture conductivity based on the rock strength , 2017 .

[49]  Mahmoud T. Ali,et al.  Acid Wormholing in Multistage Acid Fractured Wells Completed in Tight Naturally Fractured Dolomite Formation: Benefits and Impacts on Acid Fracturing Stimulation Design , 2018, Day 1 Tue, October 16, 2018.

[50]  M. W. Conway,et al.  Field and Laboratory Experience in Closed Fracture Acidizing the Lisburne Field, Prudhoe Bay, Alaska , 1992 .

[51]  Moataz Al-Harbi,et al.  Field Trials of Fiber Assisted Stimulation in Saudi Arabia: An Innovative Non-Damaging Technique for Achieving Effective Zonal Coverage During Acid Fracturing , 2008 .

[52]  A. Hill,et al.  New Model of Acid-Fracture Conductivity Based on Deformation of Surface Asperities , 1999 .

[53]  W. J. McGuire,et al.  The Effect of Vertical Fractures on Well Productivity , 1960 .

[54]  Dileep Kumar,et al.  Application of Closed Fracture Acidizing for Stmulation of Tight Carbonate Reservoir in Mumbai Offshore , 2017 .

[55]  M. Anderson.  Reactivity of San Andres Dolomite , 1991 .

[56]  Ahmed H. El-Banbi,et al.  Production Analysis of Linear Flow Into Fractured Tight Gas Wells , 1998 .

[57]  H. Nasr-El-Din,et al.  An Environmentally Friendly Stimulation Fluid for High-Temperature Applications , 2011 .

[58]  H. S. Fogler,et al.  Acidization—I. The dissolution of dolomite in hydrochloric acid , 1973 .

[59]  A. Gangi,et al.  Variation of whole and fractured porous rock permeability with confining pressure , 1978 .

[60]  Jianchun Guo,et al.  Effects of acid–rock reaction heat on fluid temperature profile in fracture during acid fracturing in carbonate reservoirs , 2014 .

[61]  W. de Vries,et al.  Development of Field Design Rules for Viscous Fingering in Acid Fracturing Treatments: A Large-Scale Model Study , 1987 .

[62]  Robert S. Schechter.  Oil Well Stimulation , 1991 .

[63]  A. Hill,et al.  The Texture of Acidized Fracture Surfaces: Implications for Acid Fracture Conductivity , 2008 .

[64]  M. Kreipl,et al.  Hydraulic fracturing fluids and their environmental impact: then, today, and tomorrow , 2017, Environmental Earth Sciences.

[65]  John de Rozieres.  Measuring Diffusion Coefficients in Acid Fracturing Fluids and Their Application to Gelled and Emulsified Acids , 1994 .

[66]  Xiaogang Li,et al.  Large-Scale Visual Experiment and Numerical Simulation of Acid Fingering during Carbonate Acid Fracturing , 2017 .

[67]  Genevieve A. Kahrilas,et al.  Biocides in hydraulic fracturing fluids: a critical review of their usage, mobility, degradation, and toxicity. , 2015, Environmental science & technology.

[68]  R. E. Hurst,et al.  Engineered Guide for Planning Acidizing Treatments Based on Specific Reservoir Characteristics , 1960 .

[69]  J. Maxey,et al.  Invert Emulsion Acid for Simultaneous Acid and Proppant Fracturing , 2013 .

[70]  Hisham A. Nasr-El-Din,et al.  Acid Fracturing of a Gas Carbonate Reservoir: The Impact of Acid Type and Lithology on Fracture Half Length and Width , 2003 .

[71]  Alfredo Lopez,et al.  Acid Fracturing Tight Gas Carbonates Reservoirs Using CO 2 to Assist Stimulation Fluids: An Alternative to Less Water Consumption while Maintaining Productivity , 2015 .

[72]  E. Soriano,et al.  The First Successful Multistage Acid Frac of an Oil Producer in Saudi Arabia , 2014 .

[73]  G. R. Dysart,et al.  The Effect of Temperature On Stimulation Design , 1969 .

[74]  Ataur R. Malik,et al.  Successful Application of Novel Fiber Laden Self-Diverting Acid System during Fracturing Operations of Naturally Fractured Carbonates in Saudi Arabia , 2011 .

[75]  Al Jawad,et al.  Development of a Fully Integrated Acid Fracture Model , 2018 .

[76]  Marten Buijse,et al.  Novel Application of Emulsified Acids to Matrix Stimulation of Heterogeneous Formations , 2000 .

[77]  Prasad B. Karadkar,et al.  Novel High Viscus Acid System for Proppant Fracture Acidizing , 2016 .

[78]  Reza Barati,et al.  A review of fracturing fluid systems used for hydraulic fracturing of oil and gas wells , 2014 .

[79]  J. E. Gordon,et al.  Laboratory and theoretical studies for acid fracture stimulation optimization , 1998 .

[80]  H. Nasr-El-Din,et al.  Acid Treatments in High Temperature Dolomitic Carbonate Reservoirs Using Emulsified Acids: A Coreflood Study , 2013 .

[81]  A. Hill,et al.  Temperature and Geometry Effects on the Fracture Surfaces Dissolution Patterns in Acid Fracturing , 2018, Day 2 Tue, June 12, 2018.

[82]  Anderson,et al.  Dynamic etching tests aid fracture-acidizing treatment design , 1989 .

[83]  H. Nasr-El-Din,et al.  Measurement of Acid Reaction Rates of a Deep Dolomitic Gas Reservoir , 2003 .

[84]  H. S. Fogler,et al.  ACIDIZATION-II. THE DISSOLUTION OF CALCITE IN HYDROCHLORIC ACID , 1975 .

[85]  K. K. Lo,et al.  Modeling of acid fracturing , 1989 .

[86]  C. Ehlig-Economides,et al.  Petroleum production systems , 1993 .

[87]  Mukul M. Sharma,et al.  Acid Fracturing in Shales: Effect of Dilute Acid on Properties and Pore Structure of Shale , 2015 .

[88]  Msalli Awadh Al-Otaibi,et al.  Laboratory Evaluation of Viscoelastic Surfactant Acid Diversion for Carbonate Reservoirs , 2011 .

[89]  A. Hill,et al.  A New Technique for Laboratory Measurement of Acid Fracture Conductivity , 1989 .

[90]  Subhash N. Shah,et al.  Toward better hydraulic fracturing fluids and their application in energy production: A review of sustainable technologies and reduction of potential environmental impacts , 2019, Journal of Petroleum Science and Engineering.

[91]  A. Sorour,et al.  Gelatin: A green corrosion inhibitor for carbon steel in oil well acidizing environment , 2018, Journal of Molecular Liquids.

[92]  J. Sheng,et al.  Impact of Matrix Acidizing on Shale Formations , 2013 .

[93]  G. Taylor,et al.  The penetration of a fluid into a porous medium or Hele-Shaw cell containing a more viscous liquid , 1958, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[94]  H. Nasr-El-Din,et al.  Evaluation of In-Situ Generated Acids for Filter Cake Clean Up , 2007 .

[95]  A. Hill,et al.  Acid-Etched Channels in Heterogeneous Carbonates--a Newly Discovered Mechanism for Creating Acid-Fracture Conductivity , 2010 .

[96]  Robert C. Burton,et al.  A comprehensive model of high-rate matrix-acid stimulation for long horizontal wells in carbonate reservoirs: Part II-wellbore/reservoir coupled-flow modeling and field application , 2012 .

[97]  Shicheng Zhang,et al.  Effect of Natural Fractures on Wormhole-Propagation Behavior , 2019 .