Effects of Interpass Idle Time on Thermal Stresses in Multipass Multilayer Weld-Based Rapid Prototyping

[1]  Dichen Li,et al.  Stress relief mechanism in layer-wise laser directly sintered porcelain ceramics , 2010 .

[2]  Leon L. Shaw,et al.  Thermal and stress modeling of multi-material laser processing , 2001 .

[3]  Lin Wu,et al.  Three-dimensional finite element analysis of thermal stress in single-pass multi-layer weld-based rapid prototyping , 2012 .

[4]  YuMing Zhang,et al.  Weld deposition-based rapid prototyping: a preliminary study , 2003 .

[5]  F. Prinz,et al.  Thermal stresses and deposition patterns in layered manufacturing , 2001 .

[6]  J. Goldak,et al.  A new finite element model for welding heat sources , 1984 .

[7]  R. Long,et al.  Numerical simulation of thermal behavior during laser metal deposition shaping , 2008 .

[8]  Mohammad Pervez Mughal,et al.  Deformation modelling in layered manufacturing of metallic parts using gas metal arc welding: effect of process parameters , 2005 .

[9]  Lars-Erik Lindgren,et al.  FINITE ELEMENT MODELING AND SIMULATION OF WELDING. PART 2: IMPROVED MATERIAL MODELING , 2001 .

[10]  Lin Wu,et al.  The Realization of Low Stress and Nonangular Distortion by Double-Sided Double Arc Welding , 2009 .

[11]  Franco Bonollo,et al.  The influence of phase transformations on residual stresses induced by the welding process—3D and 2D numerical models , 2006 .

[12]  J. Norrish,et al.  Mathematical model of welding parameters for rapid prototyping using robot welding , 1997 .

[13]  M. Mochizuki,et al.  Arc physics based heat source modelling for numerical simulation of weld residual stress and distortion , 2011 .

[14]  Chuansong Wu,et al.  Thermomechanical analysis for Laser + GMAW-P hybrid welding process , 2010 .

[15]  Paul A. Colegrove,et al.  Welding process impact on residual stress and distortion , 2009 .

[16]  Radovan Kovacevic,et al.  A Novel Control Approach for the Droplet Detachment in Rapid Prototyping by 3D Welding , 2001 .

[17]  E. Toyserkani,et al.  A 3D dynamic numerical approach for temperature and thermal stress distributions in multilayer laser solid freeform fabrication process , 2007 .

[18]  Fan Jun Meng,et al.  The Remanufacturing System Based on Robot MAG Surfacing , 2008 .

[19]  Radovan Kovacevic,et al.  A three dimensional model for direct laser metal powder deposition and rapid prototyping , 2003 .

[20]  Mohammad Pervez Mughal,et al.  Three-Dimensional Finite-Element Modelling of Deformation in Weld-Based Rapid Prototyping , 2006 .

[21]  M. Abid,et al.  Numerical simulation to study the effect of tack welds and root gap on welding deformations and residual stresses of a pipe-flange joint , 2005 .

[22]  Liang Wang,et al.  Experimental and Numerical Study of the LENS Rapid Fabrication Process , 2009 .