Effects of Titanium Concentration on Microstructure and Mechanical Properties of High Purity Vanadium Alloys

[1]  Phaniraj P. Madakashira,et al.  Effect of oxygen and nitrogen on microstructure and mechanical properties of vanadium , 2016 .

[2]  S. Kano,et al.  Microstructural characterization and strengthening mechanisms of a 12Cr-ODS steel , 2016 .

[3]  T. Toyama,et al.  The effect of crystallographic mismatch on the obstacle strength of second phase precipitate particles in dispersion strengthening: bcc Nb particles and nanometric Nb clusters embedded in hcp Zr , 2016 .

[4]  K. Tsuzaki,et al.  Stress–strain behavior of ferrite and bainite with nano-precipitation in low carbon steels , 2015 .

[5]  T. Muroga,et al.  Present Status of Vanadium Alloys for Fusion Applications , 2014 .

[6]  K. Fukumoto,et al.  Tensile testing study of dynamic interactions between dislocations and precipitate in vanadium alloys , 2013 .

[7]  S. Hwang,et al.  Combined effects of grain size and recrystallization on the tensile properties of cryorolled pure vanadium , 2009 .

[8]  H. Matsui,et al.  Identification of ultra-fine Ti-rich precipitates in V–Cr–Ti alloys irradiated below 300 °C by using positron CDB technique , 2008 .

[9]  T. Muroga,et al.  Development of fabrication technology for low activation vanadium alloys as fusion blanket structural materials , 2006 .

[10]  T. Muroga,et al.  Recovery of Hardness, Impact Properties and Microstructure of Neutron-Irradiated Weld Joint of a Fusion Candidate Vanadium Alloy , 2005 .

[11]  T. Muroga.  Vanadium Alloys for Fusion Blanket Applications , 2005 .

[12]  M. Fujiwara,et al.  Mechanical properties and microstructures of high-chromium V-Cr-Ti type alloys , 2004 .

[13]  T. Nagasaka,et al.  Recrystallization and precipitation behavior of low-activation V-Cr-Ti alloys after cold rolling , 2004 .

[14]  Qiang Li.  Modeling the microstructure–mechanical property relationship for a 12Cr–2W–V–Mo–Ni power plant steel , 2003 .

[15]  T. Muroga,et al.  Oxide formation of a purified V–4Cr–4Ti alloy during heat treatment and ion irradiation , 2002 .

[16]  Steven J. Zinkle,et al.  Vanadium alloys: overview and recent results , 2002 .

[17]  T. Muroga,et al.  Examination of fabrication process parameters for improvement of low-activation vanadium alloys , 2002 .

[18]  Imamura Motoaki.  Low Activation Characteristics of Several Heats of V-4Cr-4Ti Ingot , 2002 .

[19]  Takeo Muroga,et al.  NIFS program for large ingot production of a V–Cr–Ti alloy , 2000 .

[20]  T. Muroga,et al.  Microstructure of vanadium alloys during ion irradiation with stepwise change of temperature , 2000 .

[21]  H. Matsui,et al.  Radiation-induced precipitation in V-(Cr,Fe)-Ti alloys irradiated at low temperature with low dose during neutron or ion irradiation , 2000 .

[22]  H. Matsui,et al.  Recovery and recrystallization behavior of vanadium at various controlled nitrogen and oxygen levels , 2000 .

[23]  S. Zinkle,et al.  On the relationship between uniaxial yield strength and resolved shear stress in polycrystalline materials , 2000 .

[24]  E. Cheng.  Waste management aspect of low activation materials , 2000 .

[25]  David L. Smith,et al.  Vanadium-base alloys for fusion first-wall/blanket applications , 2000 .

[26]  T. Muroga,et al.  Reduction of impurity levels of vanadium and its alloys for fusion application , 2000 .

[27]  H. Matsui,et al.  Swelling behavior of V–Fe binary and V–Fe–Ti ternary alloys , 1998 .

[28]  P. Rice,et al.  Temperature dependence of the radiation damage microstructure in V-4Cr-4Ti neutron irradiated to low dose , 1998 .

[29]  Donald L. Smith,et al.  Development and testing of vanadium alloys for fusion applications , 1996 .

[30]  H. Matsui,et al.  Status of vanadium alloys for fusion reactors , 1996 .

[31]  David L. Smith,et al.  Reference vanadium alloy V-4Cr-4Ti for fusion application , 1995 .

[32]  G. Butterworth,et al.  Safety and environmental aspects of vanadium alloys , 1994 .

[33]  E. A. Starke,et al.  Overview no. 102 Theory assisted design of high strength low alloy aluminum , 1993 .

[34]  H. Kayano,et al.  Low swelling behavior of VTiCrSitype alloys , 1992 .

[35]  Donald L. Smith,et al.  Vanadium alloys for structural applications in fusion systems: A review of vanadium alloy mechanical and physical properties , 1991 .

[36]  F. Garner,et al.  Swelling of neutron-irradiated vanadium alloys☆ , 1991 .

[37]  D. Diercks,et al.  Alloying and impurity effects in vanadium-base alloys , 1986 .

[38]  R. Gold,et al.  Mechanical properties of vanadium and vanadium-base alloys , 1980 .

[39]  R. Watanabe,et al.  Effects of oxygen, nitrogen and carbon additions on the mechanical properties of vanadium and V/Mo alloys , 1979 .

[40]  M. Makin,et al.  DISLOCATION MOVEMENT THROUGH RANDOM ARRAYS OF OBSTACLES , 1966 .

[41]  R. Thompson,et al.  Effect of nitrogen and carbon on the low-temperature embrittlement of vanadium , 1965 .

[42]  N. Petch,et al.  The Cleavage Strength of Polycrystals , 1953 .

[43]  E. Hall,et al.  The Deformation and Ageing of Mild Steel: III Discussion of Results , 1951 .