On the evaluation of the high-frequency load line in active devices

In this work a de-embedding technique oriented to the evaluation of the load line at the intrinsic resistive core of microwave FET devices is presented. The approach combines vector high-frequency nonlinear load-pull measurements with an accurate description of the reactive nonlinearities, thus allowing one to determine the actual load line of the drain–source current generator under realistic conditions. Thanks to the proposed approach, the dispersive behavior of the resistive core and the compatibility of the voltage and current waveforms with reliability requirements can be directly monitored. Different experiments carried out on a gallium nitride HEMT sample are reported.

[1]  A Raffo,et al.  “Hybrid” approach to microwave power amplifier design , 2010, 2010 Workshop on Integrated Nonlinear Microwave and Millimeter-Wave Circuits.

[2]  T. Roh,et al.  A simple and accurate MESFET channel-current model including bias-dependent dispersion and thermal phenomena , 1997 .

[3]  D. Schreurs,et al.  Nonlinear Dispersive Modeling of Electron Devices Oriented to GaN Power Amplifier Design , 2010, IEEE Transactions on Microwave Theory and Techniques.

[4]  J. Verspecht,et al.  Large-signal network analysis , 2005, IEEE Microwave Magazine.

[5]  M. Pagani,et al.  Nonlinear RF device modelling in the presence of low‐frequency dispersive phenomena , 2006 .

[6]  P.J. Tasker.  Practical waveform engineering , 2009, IEEE Microwave Magazine.

[7]  M. Fernandez-Barciela,et al.  Direct extraction of nonlinear FET Q-V functions from time domain large signal measurements , 2000 .

[8]  A. Raffo,et al.  A New Approach to Microwave Power Amplifier Design Based on the Experimental Characterization of the Intrinsic Electron-Device Load Line , 2009, IEEE Transactions on Microwave Theory and Techniques.

[9]  S. C. Cripps,et al.  RF Power Amplifiers for Wireless Communications , 1999 .

[10]  Robert J. Trew,et al.  Wide bandgap semiconductor transistors for microwave power amplifiers , 2000 .

[11]  G. Dambrine,et al.  A new method for determining the FET small-signal equivalent circuit , 1988 .

[12]  J. Zolper,et al.  Wide bandgap semiconductor microwave technologies: from promise to practice , 1999, International Electron Devices Meeting 1999. Technical Digest (Cat. No.99CH36318).

[13]  A. Santarelli,et al.  Scalable Equivalent Circuit FET Model for MMIC Design Identified Through FW-EM Analyses , 2009, IEEE Transactions on Microwave Theory and Techniques.

[14]  T. Kazior,et al.  Trapping effects in GaN and SiC microwave FETs , 2002, Proc. IEEE.

[15]  M. Van Rossum,et al.  Direct Extraction of the Non-Linear Model for Two-Port Devices from Vectorial Non-Linear Network Analyzer Measurements , 1997, 1997 27th European Microwave Conference.

[16]  U. Mishra,et al.  The impact of surface states on the DC and RF characteristics of AlGaN/GaN HFETs , 2001 .

[17]  P. J. Tasker,et al.  Highly efficient operation modes in GaN power transistors delivering upwards of 81% efficiency and 12W output power , 2008, 2008 IEEE MTT-S International Microwave Symposium Digest.