Survey of recent advances on the interface between production system design and quality

Product design's impact on quality is widely recognized. Less well recognized is the impact of production system design on quality. As quality can be improved by integrating it with the design of the product, so it can be improved by integrating quality with the design of the production system. This article provides evidence of the production system's influence on quality and surveys recent advances on the interface between quality and production system design including the design of the production system's quality control process. After mapping the literature, we identify opportunities for future research.

[1]  M. Z. Anis,et al.  Basic Process Capability Indices: An Expository Review , 2008 .

[2]  John S. Agapiou,et al.  Metal Cutting Theory and Practice , 1996 .

[3]  James Tannock,et al.  Taguchi experimental design for manufacturing process optimisation using historical data and a neural network process model , 2005 .

[4]  William C. Jordan,et al.  Chained cross-training of assembly line workers , 2004 .

[5]  Tullio Tolio,et al.  PERFORMANCE EVALUATION OF PRODUCTION SYSTEMS MONITORED BY STATISTICAL PROCESS CONTROL AND OFF-LINE INSPECTIONS , 2006 .

[6]  S. G. Deshmukh,et al.  Advanced manufacturing technology implementation: Evidence from Indian small and medium enterprises (SMEs) , 2005 .

[7]  Stephan Biller,et al.  Improving quality in flexible manufacturing systems: A bottleneck transition approach , 2010, 2010 IEEE International Conference on Automation Science and Engineering.

[8]  Tullio Tolio,et al.  Integrated quality, production logistics and maintenance analysis of multi-stage asynchronous manufacturing systems with degrading machines , 2012 .

[9]  Dennis E. Blumenfeld,et al.  Quantitative analysis of a transfer production line with Andon , 2006 .

[10]  Richard Greenough,et al.  A decision support tool based on QFD and FMEA for the selection of manufacturing automation technologies , 2008 .

[11]  Ningjian Huang,et al.  Quality Evaluation in Flexible Manufacturing Systems: A Markovian Approach , 2007 .

[12]  Douglas C. Montgomery,et al.  Research Issues and Ideas in Statistical Process Control , 1999 .

[13]  Robert Pellerin,et al.  Integrated product specifications and productivity decision making in unreliable manufacturing systems , 2011 .

[14]  Mingyuan Chen,et al.  Grouping operations in cellular manufacturing considering alternative routings and the impact of run length on product quality , 2009 .

[15]  Colin G. Drury,et al.  Ergonomics and quality in paced assembly lines , 2001 .

[16]  Lei Liu,et al.  A Systematic Study of the Prediction Model for Operator-Induced Assembly Defects Based on Assembly Complexity Factors , 2009, IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans.

[17]  Subrata Saha,et al.  Optimal production rate and production stopping time for perishable seasonal products with ramp-type time-dependent demand , 2010, Int. J. Math. Oper. Res..

[18]  K. Srinivasa Rao,et al.  An inventory model for perishable items with alternating rate of production , 2011, Int. J. Adv. Oper. Manag..

[19]  Steven R Schmid Kalpakjian,et al.  Manufacturing Engineering and Technology , 1991 .

[20]  Young K. Son,et al.  Economic measure of productivity, quality and flexibility in advanced manufacturing systems , 1987 .

[21]  Vinod Yadava,et al.  Simultaneous Optimization of Multiple Quality Characteristics in Laser Beam Cutting Using Taguchi Method , 2007 .

[22]  Computer Staff,et al.  The Machine That Changed the World , 1992 .

[23]  Genichi Taguchi,et al.  Introduction to quality engineering.... , 2014 .

[24]  Yu Ding,et al.  A survey of inspection strategy and sensor distribution studies in discrete-part manufacturing processes , 2006 .

[25]  Robert R. Inman,et al.  Product quality and plant build complexity , 2010 .

[26]  H. Ohta,et al.  An integrated economic model for inventory and quality control problems , 2005 .

[27]  S. H. Huang,et al.  Operational dimensioning and tolerancing in process planning : setup planning , 1996 .

[28]  Stephan Biller,et al.  Quality/Quantity Improvement in an Automotive Paint Shop: A Case Study , 2010, IEEE Transactions on Automation Science and Engineering.

[29]  Tullio Tolio,et al.  Integrated analysis of quality and production logistics performance in manufacturing lines , 2011 .

[30]  Stanley B. Gershwin,et al.  Modelling and analysis of Markovian continuous flow systems with a finite buffer , 2011, Ann. Oper. Res..

[31]  J. A. Buzacott,et al.  AUTOMATIC TRANSFER LINES WITH BUFFER STOCKS , 1967 .

[32]  Stanley B. Gershwin,et al.  Analysis of long flow lines with quality and operational failures , 2008 .

[33]  Hoda A. ElMaraghy,et al.  Quality prediction in manufacturing system design. , 2006 .

[34]  J.-T. Lim,et al.  Performance analysis of serial production lines with quality inspection machines , 1998, Int. J. Syst. Sci..

[35]  Kwai-Sang Chin,et al.  A hybrid rough-cut process planning for quality , 2003 .

[36]  Jean-Yves Dantan,et al.  Variation management by functional tolerance allocation and manufacturing process selection , 2008 .

[37]  S. Jack Hu,et al.  Automated generation of assembly system-design solutions , 2005, IEEE Transactions on Automation Science and Engineering.

[38]  S. H. Huang,et al.  Rigorous Application of Tolerance Analysis in Setup Planning , 2002 .

[39]  Samuel Bassetto,et al.  Optimisation of the process control in a semiconductor company: model and case study of defectivity sampling , 2011 .

[40]  Semyon M. Meerkov,et al.  Asymptotically reliable serial production lines with a quality control system , 1991 .

[41]  Panagiotis Tsarouhas,et al.  Performance Evaluation of an Automatic Transfer Line with WIP Scrapping During Long Failures , 2007, Manuf. Serv. Oper. Manag..

[42]  Cecil Bozarth,et al.  The impact of supply chain complexity on manufacturing plant performance , 2009 .

[43]  R. Mefford,et al.  The Effect of Unions on Productivity in a Multinational Manufacturing Firm , 1986 .

[44]  K. T. Meselhy,et al.  Quality and Maintainability Frameworks for Changeable and Reconfigurable Manufacturing , 2009 .

[45]  Utpal Roy,et al.  Optimal tolerance allocation and process-sequence selection incorporating manufacturing capacities and quality issues , 2004 .

[46]  George S. Easton,et al.  Tradeoffs in Manufacturing? A Meta‐Analysis and Critique of the Literature , 2010 .

[47]  Kunpeng Wang,et al.  Modeling impact of product variety on performance in mixed-model assembly system: An artificial neural network meta-modeling approach , 2010, 2010 IEEE International Conference on Industrial Engineering and Engineering Management.

[48]  Douglas C. Montgomery,et al.  Using Control Charts to Monitor Process and Product Quality Profiles , 2004 .

[49]  Zachary G. Stoumbos.  Process capability indices: overview and extensions , 2002 .

[50]  Dennis E. Blumenfeld,et al.  Designing production systems for quality: Research opportunities from an automotive industry perspective , 2003 .

[51]  N. Oliver,et al.  World Class Manufacturing: Further Evidence in the Lean Production Debate1 , 1994 .

[52]  Jeffrey K. Liker,et al.  The Toyota way : 14 management principles from the world's greatest manufacturer , 2004 .

[53]  Panagiotis Tsarouhas,et al.  Systems Analysis Speeds Up Chipita's Food-Processing Line , 2002, Interfaces.

[54]  Tal Raviv,et al.  Optimizing the quality control station configuration , 2007 .

[55]  Semyon M. Meerkov,et al.  Product quality inspection in Bernoulli lines: analysis, bottlenecks, and design , 2010 .

[56]  Gad Rabinowitz,et al.  Optimal robot operation and selection using quality and output trade-off , 1995 .

[57]  Keith Ridgway,et al.  QFD in new production technology evaluation , 2000 .

[58]  Dennis E. Blumenfeld,et al.  Impact of Absenteeism on Assembly Line Quality and Throughput , 2009 .

[59]  V. Lo,et al.  Managing quality effectively in supply chain: a preliminary study , 2006 .

[60]  T. Tolio,et al.  Integrated Analysis of Production Logistics and Quality Performance in Transfer Lines with Rework , 2007 .

[61]  Li D. Xu.  Information architecture for supply chain quality management , 2011 .

[62]  Dennis E. Blumenfeld,et al.  Assembly line team sizing with absenteeism , 2010 .

[63]  Gary D. Scudder,et al.  Supply Chain Strategies for Perishable Products: The Case of Fresh Produce , 2009 .

[64]  Yves Dallery,et al.  Manufacturing flow line systems: a review of models and analytical results , 1992, Queueing Syst. Theory Appl..

[65]  Drew Winter,et al.  THE QUALITY CRUNCH , 2001 .

[66]  Jeffrey W. Herrmann,et al.  Estimating manufacturing cycle time and throughput in flow shops with process drift and inspection , 2008 .

[67]  Dennis E. Blumenfeld,et al.  Production system design for quality robustness , 2008 .

[68]  C. M. Hinckley,et al.  A global conformance quality model. A new strategic tool for minimizing defects caused by variation, error, and complexity , 1994 .

[69]  Dennis E. Blumenfeld,et al.  Effects of operating speed on production quality and throughput , 2008 .

[70]  Shib Sankar Sana,et al.  A production-inventory model in an imperfect production process , 2010, Eur. J. Oper. Res..

[71]  Ricardo Mateo,et al.  The impact of absenteeism on the quality of assembly line production: The importance of a specialization requirement , 2008 .

[72]  Marcello Colledani,et al.  Integrated quality and production logistics analysis of closed loop manufacturing systems , 2010, 2010 IEEE 15th Conference on Emerging Technologies & Factory Automation (ETFA 2010).

[73]  Yiming Rong,et al.  Machining Accuracy Analysis for Computer-Aided Fixture Design , 1996 .

[74]  Anna Kochan.  BMW uses even more robots for both flexibility and quality , 2005, Ind. Robot.

[75]  Jiafu Tang,et al.  Rating technical attributes in fuzzy QFD by integrating fuzzy weighted average method and fuzzy expected value operator , 2006, Eur. J. Oper. Res..

[76]  K. Brondo,et al.  First in, first out: A case study of lean manufacturing's "success" in North America's automobile industry , 2010 .

[77]  William H. Woodall,et al.  Current research on profile monitoring , 2007 .

[78]  Tullio Tolio,et al.  Impact of Quality Control on Production System Performance , 2006 .

[79]  Yasuhiro Monden,et al.  Toyota Production System: An Integrated Approach to Just-In-Time , 1993 .

[80]  Roger G. Schroeder,et al.  A hybrid model of competitive capabilities , 2011 .

[81]  Jionghua Jin,et al.  Complexity metrics for mixed model manufacturing systems based on information entropy , 2011, Int. J. Inf. Decis. Sci..

[82]  Stephan Biller,et al.  Product Sequencing With Respect to Quality in Flexible Manufacturing Systems With Batch Operations , 2010, IEEE Transactions on Automation Science and Engineering.

[83]  Xun Xu,et al.  A comprehensive review on recent developments in quality function deployment , 2010 .

[84]  Y. K. Tse,et al.  Managing product quality risk in a multi-tier global supply chain , 2011 .

[85]  Susanne M. Gatchell.  The Effect of Part Proliferation on Assembly Line Operators' Decision Making Capabilities , 1979 .

[86]  Fei Hu,et al.  Optimal production run time for a deteriorating production system under an extended inspection policy , 2009, Eur. J. Oper. Res..

[87]  Xue Liu,et al.  Improved two‐grade delayed particle swarm optimisation (TGDPSO) for inventory facility location for perishable food distribution centres in Beijing , 2007 .

[88]  Ruud H. Teunter,et al.  Lot-sizing for a single-stage single-product production system with rework of perishable production defectives , 2003, OR Spectr..

[89]  Akif Asil Bulgak,et al.  Impact of quality improvement on optimal buffer designs and productivity in automatic assembly systems , 1992 .

[90]  Ismail Sila,et al.  Quality in supply chains: an empirical analysis , 2006 .

[91]  Samuel H. Huang,et al.  Multiple Attributes Utility Analysis in Setup Plan Evaluation , 2006 .

[92]  Bernard Penz,et al.  A broader view of the economic design of the X-bar chart in the semiconductor industry , 2010 .

[93]  Jean-Yves Dantan,et al.  Conceptual process planning - an improvement approach using QFD, FMEA, and ABC methods , 2010 .

[94]  J. Buzacott.  PREDICTION OF THE EFFICIENCY OF PRODUCTION SYSTEMS WITHOUT INTERNAL STORAGE , 1967 .

[95]  Jianjun Shi,et al.  Quality control and improvement for multistage systems: A survey , 2009 .

[96]  Semyon M. Meerkov,et al.  Bernoulli production lines with quality-quantity coupling machines: monotonicity properties and bottlenecks , 2011, Ann. Oper. Res..

[97]  Y. S. Hong,et al.  A comprehensive review of tolerancing research , 2002 .

[98]  Jingshan Li,et al.  Quality analysis in flexible manufacturing systems with batch productions , 2010, 2008 IEEE International Conference on Automation Science and Engineering.

[99]  Daniel E. Whitney,et al.  The Datum Flow Chain: A systematic approach to assembly design and modeling , 1998 .

[100]  Walid Abdul-Kader,et al.  An integrated model for optimisation of production and quality costs , 2010 .

[101]  Kimberly P. Ellis,et al.  Development and application of a worker assignment model to evaluate a lean manufacturing cell , 2009 .

[102]  Jianjun Shi,et al.  Stream of Variation Modeling and Analysis for Multistage Manufacturing Processes , 2006 .

[103]  Yung-Chien Weng,et al.  A study of supplier selection factors for high-tech industries in the supply chain , 2010 .

[104]  A. F. Adams,et al.  The Survey , 2021, Dyslexia in Higher Education.

[105]  Kamran Paynabar,et al.  Modeling and Analysis of Operator Effects on Process Quality and Throughput in Mixed Model Assembly Systems , 2011 .

[106]  Abraham Mehrez,et al.  Multivariate economic analysis of robot performance repeatability and accuracy , 1996 .

[107]  Tim Barmby,et al.  Worker absenteeism: a discrete hazard model with bivariate heterogeneity , 2002 .

[108]  Yao Hu,et al.  Transient analysis to design buffer capacity in dairy filling and packing production lines , 2010 .

[109]  Ravi Shankar,et al.  Global supplier selection and order allocation using FQFD and MOLP , 2011 .

[110]  Edieal J. Pinker,et al.  The Efficiency-Quality Trade-Off of Cross-Trained Workers , 2000, Manuf. Serv. Oper. Manag..

[111]  Habib Chabchoub,et al.  Quality control system design through the goal programming model and the satisfaction functions , 2008, Eur. J. Oper. Res..

[112]  K. Sivakumar,et al.  Concurrent multi-objective tolerance allocation of mechanical assemblies considering alternative manufacturing process selection , 2011 .

[113]  F. Dabbenea,et al.  Optimisation of fresh-food supply chains in uncertain environments , Part I : Background and methodology , 2008 .

[114]  Chao-Yu Chou,et al.  A real-time inventory decision system using Western Electric run rules and ARMA control chart , 2008, Expert Syst. Appl..

[115]  Nidhal Rezg,et al.  Integrated model of preventive maintenance, quality control and buffer sizing for unreliable and imperfect production systems , 2009 .

[116]  Saman K. Halgamuge,et al.  Empirical relationships between some manufacturing practices and performance , 2008 .

[117]  Tzvi Raz.  A Survey of Models for Allocating Inspection Effort in Multistage Production Systems , 1986 .

[118]  Jian Liu,et al.  Quality-assured setup planning based on the stream-of-variation model for multi-stage machining processes , 2009 .

[119]  S. H. Husin,et al.  Production Monitoring System for Monitoring the Industrial Shop Floor Performance , 2022 .

[120]  D. P. Donk,et al.  Combined make-to-order and make-to-stock in a food production system , 2004 .

[121]  John N. Warfield,et al.  Perspectives on quality coordination and assurance in global supply chains , 2011 .

[122]  Bengt Klefsjö,et al.  The machine that changed the world , 2008 .

[123]  F. W. Taylor.  The Art of Cutting Metals , 1907 .

[124]  Robert Pellerin,et al.  Unreliable Production Lines with Defective Parts and Inspection Stations , 2012 .

[125]  Stanley B. Gershwin,et al.  Integrated quality and quantity modeling of a production line , 2005, OR Spectr..

[126]  Shamsuddin Ahmed,et al.  Application of Taguchi method to analyse the impacts of common process and batch size in multistage production system under uncertain conditions , 2011 .

[127]  Mustapha Nourelfath,et al.  An aggregation method for performance evaluation of a tandem homogenous production line with machines having multiple failure modes , 2010, Reliab. Eng. Syst. Saf..

[128]  Z. Rahman,et al.  A Study of Total Quality Management and Supply Chain Management Practices , 2011 .

[129]  A. Padiyar,et al.  Development of an information system to integrate the manufacturing firm and its supplier base for reduced non-conforming parts , 2006 .