Design and optimization of an instrument for measuring bughole rating of concrete surfaces

Abstract Bugholes are surface imperfections that appear as small pits and craters on concrete surface after the casting process. Bugholes are cosmetic surface imperfections and do not affect the structural integrity of the concrete structure. However, existences of these imperfections increase cost since bugholes require additional surface preparations before painting or finishing the concrete surface. Additionally, these surface imperfections cause secondary problems by decreasing the cover on RC making incretion of salts into the reinforcement bars inside RC. In this paper, authors discuss development of a new device to measure “bughole” rating of concrete surface. The innovative technique used in design enables us to manufacture a compact instrument, which is physically small, lightweight and practical. The paper explains the design principles of the device and the procedure used for optimization of design parameters for the best performance. Last section of the paper gives simulation results to compare the performance of the device to current state of the art methods used for bughole rating in industry.

[1]  R. Troli,et al.  Effects of shrinkage reducing admixture in shrinkage compensating concrete under non-wet curing conditions , 2005 .

[2]  Peter Billberg,et al.  Self-compacting concrete for civil engineering structures. : The Swedish experience , 1999 .

[3]  Thomas J. Reading.  The Bughole Problem , 1972 .

[4]  S. H Alsayed.  Influence of superplasticizer, plasticizer, and silica fume on the drying shrinkage of high-strength concrete subjected to hot-dry field conditions , 1998 .

[5]  K. Folliard,et al.  Properties of high-performance concrete containing shrinkage-reducing admixture , 1997 .

[6]  Mark Robinson,et al.  E-commerce procurement: challenge or opportunity? , 2000 .

[7]  M. C. Hicks,et al.  New Deveopments in Shrinkage-Reducing Admixtures , 1997, SP-173: Fifth CANMET/ACI International Conference on Superplasticizers and Other Chemical Admixtures in Concrete.

[8]  J J Brooks,et al.  Influence of mix proportions, plasticizers and superplasticizers on creep and drying shrinkage of concrete , 1989 .

[9]  J J Brooks,et al.  The Influence of Chemical Admixtures on Restrained Drying Shrinkage of Concrete , 1997, SP-173: Fifth CANMET/ACI International Conference on Superplasticizers and Other Chemical Admixtures in Concrete.

[10]  Gilles Escadeillas,et al.  Evaluating concrete surfaces using an image analysis process , 2005 .

[11]  A. Mirmiran,et al.  Effect of Untreated Surface Disbonds on Performance of FRP-Retrofitted Concrete Beams , 2009 .

[12]  J. Brooks,et al.  HOW ADMIXTURES AFFECT SHRINKAGE AND CREEP , 1999 .

[13]  Tarik Ozkul.  Design of an Embedded Device for Surface Roughness Measurement , 2006, IEEE International Conference on Computer Systems and Applications, 2006..

[14]  W. F. Price,et al.  The effects of permeable formwork on the surface properties of concrete , 1991 .

[15]  M. Arslan,et al.  The effects of permeable formworks with sucker liners on the physical properties of concrete surfaces , 2001 .

[16]  Paul Samuelsson.  Voids in Concrete Surfaces , 1970 .

[17]  D. Bentz,et al.  Shrinkage-reducing admixtures and early-age desiccation in cement pastes and mortars , 2001 .

[18]  Hajime Okamura,et al.  Self-Compacting Concrete , 2000 .