Thermal research on the uncontrolled behavior of styrene bulk polymerization

Abstract Thermal runaway can occur during the styrene bulk polymerization process because of easily formed local hotspots resulting from the high viscosity of reactants and the difficulty of heat dissipation. To obtain the thermal hazard characteristics, the polymerization behavior of styrene was investigated using differential scanning calorimetry (DSC) at a scanning rate of β = 2 °C/min. Experimental results showed that the exothermic peaks obtained for heat initiation were different from those obtained when initiator was added. The exothermic peak changed from one to two after the initiator was added. The exothermic onset temperature (T0) was also reduced. Phi-tech II was utilized to study the bulk polymerization of styrene in an adiabatic environment. The adiabatic temperature rise (ΔTad), starting temperature of uncontrolled polymerization (Tstar), maximum temperature (Tend), and heat of polymerization (ΔH) under different conditions were acquired. When the dose of the additive was increased, the starting temperature of uncontrolled polymerization (Tstar) decreased and the adiabatic temperature rise (ΔTad) increased gradually. Severity grading was performed based on the severity evaluation criteria of runaway reaction. The results can help designers decide whether it is necessary to take certain measures to reduce risk.

[1]  Christopher L. Warner,et al.  Chemical Safety and Hazard Investigation Board , 2010 .

[2]  M. Shyu,et al.  Evaluation of runaway reaction for dicumyl peroxide in a batch reactor by DSC and VSP2 , 2009 .

[3]  Francis Stoessel,et al.  Thermal Safety of Chemical Processes , 2020 .

[4]  Claudio Ampelli,et al.  Calorimetric study of the inhibition of runaway reactions during methylmethacrylate polymerization processes , 2006 .

[5]  H. Oliva,et al.  Bulk polymerization of styrene in the presence of polybutadiene: Effect of initiator type and prepolymerization conditions on particle morphology , 2004 .

[6]  C. Shu,et al.  Thermal polymerization of uninhibited styrene investigated by using microcalorimetry. , 2009, Journal of hazardous materials.

[7]  K. Luo,et al.  The critical runaway condition and stability criterion in the phenol–formaldehyde reaction , 2000 .

[8]  Ken Okada,et al.  Diphenylmethane diisocyanate self-polymerization: Thermal hazard evaluation and proof of runaway reaction in gram scale , 2011 .

[9]  Renato Rota,et al.  Temperature diagrams for preventing decomposition or side reactions in liquid–liquid semibatch reactors , 2006 .

[10]  P. Netti,et al.  Isothermal and non-isothermal polymerization of methyl methacrylate in presence of multiple initiators , 2010 .

[11]  Y. Duh,et al.  Studies on the runaway reaction of ABS polymerization process. , 2008, Journal of hazardous materials.

[12]  C. Shu,et al.  Thermal hazard evaluation of the autocatalytic reaction of benzoyl peroxide using DSC and TAM III , 2015 .

[13]  D. I. Townsend,et al.  Thermal hazard evaluation by an accelerating rate calorimeter , 1980 .

[14]  M. Worzakowska.  The influence of tertiary aromatic amines on the BPO initiated cure of unsaturated epoxy polyesters with styrene studied by non-isothermal DSC , 2011 .

[15]  C. Shu,et al.  Prediction of thermal hazard for TBPTMH mixed with BPO through DSC and isoconversional kinetics analysis , 2016, Journal of Thermal Analysis and Calorimetry.

[16]  Chi-Min Shu,et al.  Applications of thermal hazard analyses on process safety assessments , 2015 .

[17]  Ulrich Nieken,et al.  Modeling safety aspects of styrene polymerization processes , 2005 .

[18]  C. Shu,et al.  Multi-walled carbon nanotube thermal stability characteristics evaluation by DSC tests , 2012 .