Experimental evaluation of anisotropy in injection molded polypropylene/wood fiber biocomposites

[1]  R. Lang,et al.  Effect of fiber orientation, stress state and notch radius on the impact properties of short glass fiber reinforced polypropylene , 2015 .

[2]  R. Newman,et al.  Micromechanical modelling for wood–fibre reinforced plastics in which the fibres are neither stiff nor rod-like , 2014 .

[3]  A. El‐Sabbagh.  Effect of coupling agent on natural fibre in natural fibre/polypropylene composites on mechanical and thermal behaviour , 2014 .

[4]  Yuanfeng Pan,et al.  CTMP-based cellulose fibers modified with core-shell latex for reinforcing biocomposites. , 2013, Carbohydrate polymers.

[5]  F. Vilaseca,et al.  Impact and flexural properties of stone-ground wood pulp-reinforced polypropylene composites , 2013 .

[6]  D. Kurniawan,et al.  Effects of repetitive processing, wood content, and coupling agent on the mechanical, thermal, and water absorption properties of wood/polypropylene green composites , 2013 .

[7]  Sandeep S. Nair,et al.  Nanoscale characterization of interphase properties in maleated polypropylene‐treated natural fiber‐reinforced polymer composites , 2013 .

[8]  S. Boufi,et al.  PP composites based on mechanical pulp, deinked newspaper and jute strands: A comparative study , 2012 .

[9]  F. Espinach,et al.  Tensile strength characteristics of polypropylene composites reinforced with stone groundwood fibers from softwood , 2012 .

[10]  L. Sobczak,et al.  Polypropylene composites with natural fibers and wood – General mechanical property profiles , 2012 .

[11]  Heidi Peltola,et al.  Short cellulosic fiber/starch acetate composites — micromechanical modeling of Young’s modulus , 2011 .

[12]  J. Modniks,et al.  Modeling elastic properties of short flax fiber-reinforced composites by orientation averaging , 2010 .

[13]  James Thomason,et al.  Dependence of interfacial strength on the anisotropic fiber properties of jute reinforced composites , 2010 .

[14]  J. P. López,et al.  Biocomposites from abaca strands and polypropylene. Part I: Evaluation of the tensile properties. , 2010, Bioresource technology.

[15]  H. Yano,et al.  High-strength nanocomposite based on fibrillated chemi-thermomechanical pulp , 2009 .

[16]  Michael P. Wolcott,et al.  Effects of processing method and fiber size on the structure and properties of wood-plastic composites , 2009 .

[17]  P. Brachet,et al.  Extrusion-based wood fibre–PP composites: Wood powder and pelletized wood fibres – a comparative study , 2008 .

[18]  M. Wolcott,et al.  Effect of fiber length on processing and properties of extruded wood-fiber/HDPE composites , 2008 .

[19]  B. Kokta,et al.  Effects of Antioxidant and Initiator on the Mechanical Properties of Polypropylene—Aspen Composites , 2008 .

[20]  R. Långström,et al.  Microstructure and Strength of Injection Molded Natural Fiber Composites , 2007 .

[21]  A. Błędzki,et al.  Influence of Processing Temperature on Microcellular Injection-Moulded Wood–Polypropylene Composites , 2006 .

[22]  Alexei Vazquez,et al.  Effect of Microstructure on the Tensile and Fracture Properties of Sisal Fiber/Starch-based Composites , 2006 .

[23]  N. Sombatsompop,et al.  Influence of Type and Concentration of Maleic Anhydride Grafted Polypropylene and Impact Modifiers on Mechanical Properties of PP/Wood Sawdust Composites , 2005 .

[24]  James Thomason,et al.  Thermoelastic anisotropy of a natural fiber , 2002 .

[25]  Thais H. S. Costa,et al.  Performance of polypropylene–wood fiber composites , 1999 .

[26]  Xiao Hu,et al.  EFFECTS OF FIBER LENGTH AND ORIENTATION DISTRIBUTIONS ON THE MECHANICAL PROPERTIES OF SHORT-FIBER-REINFORCED POLYMERS , 1999 .

[27]  Olfat Y. Mansour,et al.  Lignocellulosic polymer composite IV , 1998 .

[28]  S. Fu,et al.  The elastic modulus of misaligned short-fiber-reinforced polymers , 1998 .

[29]  J. Balatinecz,et al.  Effect of Ester Linkages on the Mechanical Properties of Wood Fiber-Polypropylene Composites , 1997 .

[30]  Bernd Lauke,et al.  Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers , 1996 .

[31]  P. Gatenholm,et al.  Conversion of plastic/cellulose waste into composites. I: Model of the interphase , 1995 .

[32]  R. Rowell,et al.  Recycled Newspaper Fibers as Reinforcing Fillers in Thermoplastics: Part I-Analysis of Tensile and Impact Properties in Polypropylene , 1994 .

[33]  M. Akay,et al.  Fibre orientation and mechanical behaviour in reinforced thermoplastic injection mouldings , 1991 .

[34]  P. Templeton,et al.  Strength Predictions of Injection Molding Compounds , 1990 .

[35]  B. Kokta,et al.  Effect of fiber treatment on mechanical properties of polypropylene‐wood fiber composites , 1989 .

[36]  S. Kenig,et al.  Fiber orientation development in molding of polymer composites , 1986 .

[37]  J. Kardos.  Critical issues in achieving desirable mechanical properties for short fiber composites , 1985 .

[38]  B. D. Agarwal,et al.  Analysis and Performance of Fiber Composites , 1980 .

[39]  M. Whale,et al.  The load‐bearing capability of short‐fiber thermoplastics composites—A new practical system of evaluation , 1979 .