ENVIRONMENTALLY CONSCIOUS CHEMICAL PROCESS DESIGN

▪ Abstract The environment has emerged as an important determinant of the performance of the modern chemical industry. This paper reviews approaches for incorporating environmental issues into the design of new processes and manufacturing facilities. The organizational framework is the design process itself, which includes framing the problem and generating, analyzing, and evaluating alternatives. A historical perspective on the chemical process synthesis problem illustrates how both performance objectives and the context of the design have evolved to the point where environmental issues must be considered throughout the production chain. In particular, the review illustrates the need to view environmental issues as part of the design objectives rather than as constraints on operations. A concluding section identifies gaps in the literature and opportunities for additional research.

[1]  V. Manousiouthakis,et al.  Waste reduction through multicomponent mass exchange network synthesis , 1994 .

[2]  James Douglas Englehardt,et al.  Pollution prevention technologies: A review and classification , 1993 .

[3]  J. G. Petrie,et al.  Life cycle assessment applied to process design: Environmental and economic analysis and optimization of a nitric acid plant , 1996 .

[4]  D. W. Edwards,et al.  Chemical process route selection based on assessment of inherent environmental hazard , 1997 .

[5]  Mahmoud M. El-Halwagi,et al.  Synthesis of reactive mass-exchange networks , 1992 .

[6]  H. D. Spriggs,et al.  Minimization of environmental emissions through improved process integration , 1990 .

[7]  W. D. Byers,et al.  Identify appropriate water reclamation technologies , 1998 .

[8]  A K Hilaly,et al.  Pollution balance: a new methodology for minimizing waste production in manufacturing processes. , 1994, Air & waste : journal of the Air & Waste Management Association.

[9]  R. Smith,et al.  Targeting flue gas emissions , 1991 .

[10]  S. K. Mallick,et al.  Envirocad: A design tool for efficient synthesis and evaluation of integrated waste recovery, treatment and disposal processes , 1994 .

[11]  Kirsten Sinclair Rosselot,et al.  Pollution prevention for chemical processes , 1996 .

[12]  J. Houghton,et al.  Climate change 1995: the science of climate change. , 1996 .

[13]  N. Chadha Develop multimedia pollution prevention strategies , 1994 .

[14]  Robin Smith Waste minimisation in the process industries , 1992 .

[15]  Antonio Di Guardo,et al.  Toxics release inventories : opportunities for improved presentation and interpretation , 1996 .

[16]  Mahmoud M. El-Halwagi,et al.  Selection of optimal VOC-condensation systems , 1994 .

[17]  Roger A. Sheldon,et al.  CONSIDER THE ENVIRONMENTAL QUOTIENT , 1994 .

[18]  C. Yaws,et al.  Waste minimization by process modification , 1993 .

[19]  Dennis C. Hendershot Measuring inherent safety, health and environmental characteristics early in process development , 1997 .

[20]  Ignacio E. Grossmann,et al.  Mixed-integer programming approach for the synthesis of integrated process flowsheets , 1985 .

[21]  Z. Fonyo,et al.  Process development for waste minimization : the retrofitting problem , 1994 .

[22]  R. Sheldon Catalysis: The Key to Waste Minimization * , 1997 .

[23]  Robert T. Clemen,et al.  Making Hard Decisions: An Introduction to Decision Analysis , 1997 .

[24]  A. P. Rossiter,et al.  Apply process integration to waste minimization , 1993 .

[25]  D. Dowson,et al.  Pinch cleans up , 1994 .

[26]  L. R. Taylor,et al.  VOLTAMMETRY MADE EASY , 1994 .

[27]  C.-P. Mak,et al.  INTEGRATED SOLUTIONS TO ENVIRONMENTAL PROTECTION IN PROCESS R&D , 1997 .

[28]  Paul T. Anastas,et al.  Computer-Assisted Alternative Synthetic Design for Pollution Prevention at the U.S. Environmental Protection Agency , 1994 .

[29]  Michael R. Overcash,et al.  Net Waste Reduction Analysis Applied to Air Pollution Control Technologies , 1993 .

[30]  Mahmoud M. El-Halwagi,et al.  Synthesis of waste interception and allocation networks , 1996 .

[31]  Richard L. Smith,et al.  Transferring waste minimization solutions between industrial categories with a unit operations approach. I: Chemical and plating industries , 1995 .

[32]  R.W.H. Sargent,et al.  A functional approach to process synthesis and its application to distillation systems , 1998 .

[33]  Lorenz T. Biegler,et al.  Reactor network targeting for waste minimization , 1994 .

[34]  Luke E. K. Achenie,et al.  On the design of environmentally benign refrigerant mixtures : a mathematical programming approach , 1997 .

[35]  E. Petela,et al.  Water, water everywhere... , 1994 .

[36]  E. Petela,et al.  Waste minimisation in the process industries. V: Utility waste , 1992 .

[37]  Efstratios N. Pistikopoulos,et al.  Minimizing the environmental impact of process Plants: A process systems methodology , 1995 .

[38]  Jane C. Bare,et al.  Pollution prevention with chemical process simulators: The generalized waste reduction (WAR) algorithm , 1997 .

[39]  Y. P. Wang,et al.  Wastewater minimization with flowrate constraints , 1995 .

[40]  W. W. Doerr Use guidewords to identify pollution prevention opportunities , 1996 .

[41]  Nick Chadha,et al.  Minimize Emissions of Air Toxics via Process Changes , 1993 .

[42]  K. S. Eble,et al.  Zero discharge: What, why, and how , 1993 .

[43]  James M. Douglas,et al.  Cost diagrams and the quick screening of process alternatives , 1985 .

[44]  Robin Smith Chemical process design , 1994 .

[45]  James S. Bridges,et al.  A “Mark I” measurement methodology for pollution prevention progress occurring as a result of product design decisions , 1994 .

[46]  H. Dennis Spriggs,et al.  Integration: The key to pollution prevention , 1994 .

[47]  M. El‐Halwagi Pollution prevention through process integration : systematic design tools , 1997 .

[48]  Chuei-Tin Chang,et al.  A multiobjective programming approach to waste minimization in the utility systems of chemical processes , 1996 .

[49]  Mahmoud M. El-Halwagi,et al.  SYNTHESIS OF FLEXIBLE MASS-EXCHANGE NETWORKS , 1995 .

[50]  Klaus D. Timmerhaus,et al.  Plant design and economics for chemical engineers , 1958 .

[51]  K. Hungerbuhler,et al.  Integrated Product Design in Chemical Industry. A Plea for Adequate Life-Cycle Screening Indicators , 1997, CHIMIA.

[52]  D. Luper Integrate waste minimization into R and D and design , 1996 .

[53]  K. P. Papalexandri,et al.  Mass exchange networks for waste minimization : a simultaneous approach : Process design , 1994 .

[54]  Mahmoud M. El-Halwagi,et al.  Synthesis of reactive mass-exchange networks with general nonlinear equilibrium functions , 1994 .

[55]  Peter Mizsey Waste reduction in the chemical industry: a two level problem , 1994 .

[56]  Robin Smith,et al.  Waste minimisation in the process industries. I : the problem , 1991 .

[57]  Ignacio E. Grossmann,et al.  INCORPORATING TOXICOLOGY IN THE SYNTHESIS OF INDUSTRIAL CHEMICAL COMPLEXES , 1982 .

[58]  Gael D. Ulrich,et al.  A Guide to Chemical Engineering Process Design and Economics , 1984 .

[59]  Konrad Hungerbühler,et al.  Plant optimisation by retrofitting using a hierarchical method: Entrainer selection, recycling and heat integration , 1997 .

[60]  R. Bretz,et al.  Life-Cycle Assessment of Chemical Production Processes: A Tool for Ecological Optimization , 1997, CHIMIA.

[61]  Robin Smith,et al.  Design of distributed effluent treatment systems , 1994 .

[62]  I. H. Farag,et al.  MODELING POLLUTION PREVENTION , 1992 .

[63]  Mahmoud M. El-Halwagi,et al.  Synthesis of mass exchange networks , 1989 .

[64]  A. K. Hilaly,et al.  Process simulation tools for pollution prevention , 1996 .

[65]  G. Ondrey,et al.  Responsible care gains momentum , 1997 .

[66]  Amy R. Ciric,et al.  Economic sensitivity analysis of waste treatment costs in source reduction projects: Continuous optimization problems , 1994 .

[67]  Barry Crittenden,et al.  Quantitative environmental impact analysis for clean design , 1996 .

[68]  George W. A. Milne,et al.  Use of Computers in Toxicology and Chemical Design , 1996 .

[69]  William D. Baasel,et al.  Preliminary chemical engineering plant design , 1976 .

[70]  M. Glauser,et al.  ECO-EFFICIENCY : A PREREQUISITE FOR FUTURE SUCCESS , 1997 .

[71]  B. Linnhoff,et al.  Use Pinch Analysis to knock down capital costs and emissions , 1994 .

[72]  Ignacio E. Grossmann,et al.  Systematic Methods of Chemical Process Design , 1997 .

[73]  Alan P. Rossiter Waste minimization through process design , 1995 .

[74]  V. Manousiouthakis,et al.  Automatic synthesis of mass-exchange networks with single-component targets , 1990 .

[75]  George Stephanopoulos,et al.  Generation and assessment of batch processes with ecological considerations , 1995 .

[76]  A. P. Rossiter,et al.  Minimize waste by managing process design , 1996 .

[77]  Edward S. Rubin,et al.  Synthesizing optimal flowsheets; Applications to IGCC system environmental control , 1992 .

[78]  Jack R. Hopper,et al.  Pollution prevention by process modification: Reactions and separations , 1994 .

[79]  James M. Douglas,et al.  Conceptual Design of Chemical Processes , 1988 .

[80]  Saeed Fathi-Afshar,et al.  Designing the optimal structure of the petrochemical industry for minimum cost and least gross toxicity of chemical production , 1985 .

[81]  T. F. Edgar,et al.  Artificial Intelligence Approach to Synthesis of a Process for Waste Minimization , 1994 .

[82]  P. Tripathi,et al.  Pinch technology reduces wastewater , 1996 .

[83]  Paul T. Anastas,et al.  Green Chemistry: Designing Chemistry for the Environment , 1996 .

[84]  E. Hertwich,et al.  Environmental policy analysis: evaluating toxic impact assessment methods: what works best. , 1998, Environmental science & technology.

[85]  Mahmoud M. El-Halwagi,et al.  Simultaneous synthesis of mass‐exchange and regeneration networks , 1990 .

[86]  Mahmoud M. El-Halwagi Optimal Design of Membrane-Hybrid Systems for Waste Reduction , 1993 .

[87]  Chris Hendrickson,et al.  Toxic Emissions Indices for Green Design and Inventory , 1995 .

[88]  D. M. Haseltine Wastes : to burn, or not to burn ? , 1992 .

[89]  George Stephanopoulos,et al.  Knowledge-based validation and waste management of batch pharmaceutical process designs , 1996 .

[90]  D. Himmelblau,et al.  Optimization of Chemical Processes , 1987 .

[91]  James B. Hendrickson Teaching Alternative Syntheses: The SYNGEN Program , 1996 .

[92]  John R. Flower,et al.  A modular approach to synthesis of cleaner processes , 1995 .

[93]  J. Frank Valle-Riestra,et al.  Project evaluation in the chemical process industries , 1983 .

[94]  A. Ciric,et al.  Multiobjective optimization approach to sensitivity analysis: waste treatment costs in discrete process synthesis and optimization problems , 1993 .

[95]  M. Wasilewski,et al.  Make your process water pay for itself , 1996 .

[96]  T. Godbey Brace your plant against a dust explosion , 1991 .

[97]  D. C. Christensen,et al.  Evaluate decision criteria systematically , 1994 .

[98]  Mahmoud M. El-Halwagi,et al.  Synthesis of reverse‐osmosis networks for waste reduction , 1992 .

[99]  Y.-P. Wang,et al.  Time pinch analysis , 1995 .

[100]  Gary F. Bennett Solvent substitution for pollution prevention : U.S. Department of Energy and U.S. Air Force, Noyes Data Corp., Park Ridge, NJ, ISBN 0-8155-1319-4, 1992, 335 pp., $48. , 1993 .

[101]  Donald R. Woods Process Design and Engineering Practice , 1994 .

[102]  Stephen C. DeVito,et al.  Designing safer chemicals : green chemistry for pollution prevention : developed from a symposium sponsored by the Division of Environmenal Chemistry, Inc. , 1996 .

[103]  E. Petela,et al.  Waste minimisation in the process industries. II : Reactors , 1991 .

[104]  M. Dantus,et al.  Economic Evaluation for the Retrofit of Chemical Processes through Waste Minimization and Process Integration , 1996 .

[105]  J. S. Hirschhorn,et al.  Industrial pollution prevention: Critical review discussion papers , 1992 .

[106]  J. R. Schaich Estimate fugitive emissions from process equipment , 1991 .

[107]  Asher Kiperstok,et al.  Environmental optimisation of releases from industrial sites into a linear receiving body , 1996 .

[108]  Jan J. Lerou,et al.  Chemical reaction engineering : A multiscale approach to a multiobjective task , 1996 .

[109]  Mahmoud M. El-Halwagi,et al.  Synthesis of optimal heat-induced separation networks , 1995 .

[110]  Efstratios N. Pistikopoulos,et al.  A methodology for environmental impact minimization: Solvent design and reaction path synthesis issues , 1996 .

[111]  G. Margaret Wells Handbook of Petrochemicals and Processes , 1991 .

[112]  K. E. Nelson Use these ideas to cut waste , 1990 .

[113]  K. Hungerbuhler,et al.  Integrated Process Development: The Key to Future Production of Chemicals , 1997, CHIMIA.

[114]  Jonathan P Knight,et al.  Computer-aided design tools to link chemistry and design in process development , 1994 .

[115]  J. L. Bravo Design steam strippers for water treatment , 1994 .

[116]  A. Weidenhaupt,et al.  ENVIRONMENTAL RISK ASSESSMENT OF CHEMICAL SUBSTANCES , 1997 .

[117]  Paul T. Anastas,et al.  Benign by Design: Alternative Synthetic Design for Pollution Prevention , 1994 .

[118]  Mahmoud M. El-Halwagi,et al.  Optimal design of multicomponent VOC condensation systems , 1994 .

[119]  Helmut Körner Optimaler Energieeinsatz in der Chemischen Industrie , 1988 .

[120]  R. Clift,et al.  Measuring Corporate Environmental Performance: The ICI Environmental Burden System , 1997 .

[121]  K. Hartmann,et al.  Analysis and Synthesis of Chemical Process Systems , 1990 .

[122]  Mahmoud M. El-Halwagi,et al.  Synthesis of combined heat and reactive mass-exchange networks , 1994 .

[123]  Efstratios N. Pistikopoulos,et al.  Generalized modular representation framework for process synthesis , 1996 .

[124]  Mahmoud M. El-Halwagi,et al.  Optimal design of pervaporation systems for waste reduction , 1993 .

[125]  Vasilios Manousiouthakis,et al.  Variable target mass‐exchange network synthesis through linear programming , 1996 .

[126]  J Siljeholm,et al.  A Hazard Ranking of Organic Contaminants in Refinery Effluents , 1997, Toxicology and industrial health.

[127]  J. M. Douglas Process synthesis for waste minimization , 1992 .

[128]  Paul N. Sharratt,et al.  Optimisation of pollution control operations in industrial sites considering decay capabilities of the receptors , 1997 .

[129]  Subhas K. Sikdar,et al.  Pollution Balance Method and the Demonstration of Its Application to Minimizing Waste in a Biochemical Process , 1995 .

[130]  A. P. Rossiter,et al.  Rank pollution prevention and control options , 1994 .

[131]  Karen High,et al.  Waste minimization by process modification , 1996 .

[132]  L. T. Fan,et al.  HIDEN: A Hybrid Intelligent System for Synthesizing Highly Controllable Exchanger Networks. Implementation of a Distributed Strategy for Integrating Process Design and Control , 1994 .

[133]  Mary Ann Curran,et al.  Industrial Pollution Prevention : A Critical Review , 1992 .

[134]  James M. Douglas,et al.  Synthesis of separation system flowsheels , 1995 .

[135]  S. K. Mallick,et al.  A Pollution Reduction Methodology for Chemical Process Simulators , 1996 .