Analysis on annular flow of liquid transported through a partially filled axially rotating pipe

[1]  S. Prabhu,et al.  Heat transfer in a partially filled rotary evaporator , 2019, International Journal of Thermal Sciences.

[2]  S. Prabhu,et al.  Impact of inclination on single phase heat transfer in a partially filled rotating pipe , 2018, International Journal of Heat and Mass Transfer.

[3]  Naveen Tiwari,et al.  Hydrodynamic stability of thermoviscous liquid film inside a rotating horizontal cylinder: Heating and cooling effects , 2018 .

[4]  S. Prabhu,et al.  Heat transfer in a partially filled rotating pipe with single phase flow , 2018 .

[5]  S. Prabhu,et al.  Flow transitions in a partially filled rotating inclined pipe with continuous flow , 2017 .

[6]  P. Pelz,et al.  Two turbulent flow regimes at the inlet of a rotating pipe , 2016 .

[7]  R. Jachuck,et al.  Experimental investigation of continuous single‐phase rimming flow in a horizontal rotating cylinder , 2014 .

[8]  Himanshu Lodha,et al.  Intensified Biodiesel Production Using a Rotating Tube Reactor , 2012 .

[9]  A. Razani,et al.  A ROTATING HEAT PIPE FOR COOLING OF SUPERCONDUCTING MACHINES , 2008 .

[10]  Po-Ju Chen,et al.  Low volume fraction rimming flow in a rotating horizontal cylinder , 2007 .

[11]  Seong-Man Choi,et al.  Spray characteristics of the rotating fuel injection system of a micro-jet engine , 2010 .

[12]  Bryan H. Lerg,et al.  Analysis of liquid breakup regimes in fuel slinger atomization , 2006 .

[13]  Bryan H. Lerg,et al.  Experimental visualizations of liquid breakup regimes in fuel slinger atomization , 2006 .

[14]  S. Wallin,et al.  Observations on the predictions of fully developed rotating pipe flow using differential and explicit algebraic Reynolds stress models , 2006 .

[15]  Jang-Hyuk Kwon,et al.  Implementation of k-w Turbulence Models in an Implicit Multigrid Method , 2004 .

[16]  S. Lowe.  Omission of Critical Reynolds Number for Open Channel Flows in Many Textbooks. , 2003 .

[17]  Lanchao Lin,et al.  Correlations of critical froude number for annular-rimming flow in rotating heat pipes , 2001 .

[18]  J. S. Lee,et al.  Heat transfer and internal flow characteristics of a coil-inserted rotating heat pipe , 2001 .

[19]  Alan W. Roberts,et al.  The influence of granular vortex motion on the volumetric performance of enclosed screw conveyors , 1999 .

[20]  Lakshminarayanan Mahadevan,et al.  Axial instability of a free-surface front in a partially filled horizontal rotating cylinder , 1999 .

[21]  Sigurdur T. Thoroddsen,et al.  Experimental study of coating flows in a partially-filled horizontally Rotating cylinder , 1997 .

[22]  M. Groll,et al.  Critical Conditions for Collapse of Annular Flow in a Rotating Heat Pipe with a Cylindrical Wall , 1996 .

[23]  A. Faghri,et al.  Two-Dimensional Rotating Heat Pipe Analysis , 1995 .

[24]  Amir Faghri,et al.  Vapor flow analysis of an axially rotating heat pipe , 1993 .

[25]  Amir Faghri,et al.  An analysis of the vapor flow and the heat conduction through the liquid-wick and pipe wall in a heat pipe with single or multiple heat sources , 1990 .

[26]  U. Lei,et al.  Flow through rotating straight pipes , 1990 .

[27]  M. Groll,et al.  Heat Pipes for Cooling of an Electric Motor , 1978 .

[28]  L. E. Scriven,et al.  Rimming flow of liquid in a rotating cylinder , 1976, Journal of Fluid Mechanics.

[29]  E. Barnea,et al.  The flow of thin films inside rotating cylindrical tubes , 1972 .

[30]  A. White,et al.  Flow of a Fluid in an Axially Rotating Pipe , 1964 .