Assessing concrete carbonation resistance through air permeability measurements

Abstract Performance-based design and specification of concrete for durability is the most efficient way to achieve the intended service life; its use has been increasing. However, to have a consistent approach, the durability related properties must be assessed onsite. This assessment can provide useful and realistic information to estimate the service life of newly built concrete structures. Thus, this work aims at evaluating the suitability of a non-destructive onsite test method to provide such information. A preliminary study, comprising tests on air permeability and carbonation resistance of several concrete mixes and an analysis of its results, was carried out. The analysis allowed proposing an analytical model, based on the calibration of a theoretical model, correlating air permeability with resistance to carbonation. This allows estimating reliably carbonation resistance through air permeability results. Although further research is needed, to provide more data, the results encourage the use of a simple test method that operates on a completely non-destructive basis. Thus, a contribution to a more consistent approach towards the achievement of durable concrete structures and of the associated positive environmental impacts is provided.

[1]  Adrian Long,et al.  ‘PERMIT’ ion migration test for measuring the chloride ion transport of concrete on site , 2005 .

[2]  K. Tuutti.  Corrosion of steel in concrete , 1982 .

[3]  Moray D. Newlands,et al.  A study of the CEN test method for measurement of the carbonation depth of hardened concrete , 2000 .

[4]  Hokwon A. Cho,et al.  Introduction to Regression Analysis , 2004 .

[5]  Fernando A. Branco,et al.  A method for the use of accelerated carbonation tests in durability design , 2012 .

[6]  R. K. Dhir,et al.  Near-surface characteristics of concrete : assessment and development of in situ test methods , 1987 .

[7]  J. de Brito,et al.  Statistical modelling of carbonation in reinforced concrete , 2014 .

[8]  Maurizio Taliano,et al.  Comparison of carbonation depths measured on in-field exposed existing r.c. structures with predictions made using fib-Model Code 2010 , 2013 .

[9]  Odd E. Gjørv,et al.  Durability design of concrete structures in severe environments , 2014 .

[10]  Los Angeles,et al.  in Civil Engineering , 1996 .

[11]  Ningxu Han,et al.  Role of NDE in quality control during construction of concrete infrastructures on the basis of service life design , 2003 .

[12]  Walid A. Al-Kutti,et al.  Correlation between compressive strength and certain durability indices of plain and blended cement concretes , 2009 .

[13]  Fernando A. Branco,et al.  About the statistical interpretation of air permeability assessment results , 2012 .

[14]  Joseph G. Eisenhauer.  Regression through the Origin , 2003 .

[15]  Ahmed Loukili,et al.  Performance-based design and carbonation of concrete with high fly ash content , 2011 .

[16]  R. Torrent,et al.  A two-chamber vacuum cell for measuring the coefficient of permeability to air of the concrete cover on site , 1992 .

[17]  L. J. Parrott,et al.  Some effects of cement and curing upon carbonation and reinforcement corrosion in concrete , 1996 .

[18]  P. C. Kreijger.  The skin of concrete composition and properties , 1984 .

[19]  Carlos Chastre,et al.  Carbonation Service Life modelling of RC structures for concrete with portland and blended cements. , 2013 .

[20]  Fernando A. Branco,et al.  Field assessment of the relationship between natural and accelerated concrete carbonation resistance , 2013 .

[21]  Said Jalali,et al.  Probability-based durability analysis of concrete structures in marine environment , 2004 .

[22]  J. R. Mackechnie,et al.  Carbonation of concrete bridge structures in three South African localities , 2007 .