Experimental comparison of acetone-n-butanol-ethanol (ABE) and isopropanol-n-butanol-ethanol (IBE) as fuel candidate in spark-ignition engine

[1]  E Jiaqiang,et al.  Effect analysis on flow and boiling heat transfer performance of cooling water-jacket of bearing in the gasoline engine turbocharger , 2018 .

[2]  Shengming Liao,et al.  Inverting methods for thermal reservoir evaluation of enhanced geothermal system , 2018 .

[3]  P. Zhang,et al.  Laser diagnostics and chemical kinetic analysis of PAHs and soot in co-flow partially premixed flames using diesel surrogate and oxygenated additives of n-butanol and DMF , 2018 .

[4]  Ying Huang,et al.  Large eddy simulation of film cooling flow from a fanshaped hole , 2018 .

[5]  Huawei Liu,et al.  Effects of cold start control strategy on cold start performance of the diesel engine based on a comprehensive preheat diesel engine model , 2018 .

[6]  Mingfa Yao,et al.  Soot reduction effects of the addition of four butanol isomers on partially premixed flames of diesel surrogates , 2017 .

[7]  Chao Jin,et al.  Effects of different alcohols additives on solubility of hydrous ethanol/diesel fuel blends , 2016 .

[8]  Fujun Zhang,et al.  Numerical modeling of acetone–butanol–ethanol and diesel blends droplet evaporation process , 2016 .

[9]  Karthik Nithyanandan,et al.  An Experimental Study on the Potential Usage of Acetone as an Oxygenate Additive in PFI SI Engines , 2016 .

[10]  Wenming Yang,et al.  Development of a skeletal mechanism for biodiesel blend surrogates with varying fatty acid methyl esters proportion , 2016 .

[11]  Karthik Nithyanandan,et al.  Impacts of Acetone–Butanol–Ethanol (ABE) ratio on spray and combustion characteristics of ABE–diesel blends , 2015 .

[12]  Zuo-hua Huang,et al.  Comparative Study of High-Alcohol-Content Gasoline Blends in an SI Engine , 2015 .

[13]  Suraj Singh,et al.  Technical feasibility study of butanol–gasoline blends for powering medium-duty transportation spark ignition engine , 2015 .

[14]  Jianqin Fu,et al.  Computational Investigation of Oxygen Concentration Effects on a Soot Mechanism with a Phenomenological Soot Model of Acetone–Butanol–Ethanol (ABE) , 2015 .

[15]  Karthik Nithyanandan,et al.  Impacts of acetone on the spray combustion of Acetone–Butanol–Ethanol (ABE)-Diesel blends under low ambient temperature , 2015 .

[16]  Chunhua Zhang,et al.  Spray and Combustion Characteristics of Neat Acetone-Butanol-Ethanol, n-Butanol, and Diesel in a Constant Volume Chamber , 2014 .

[17]  M. Ouyang,et al.  Regional disparity of urban passenger transport associated GHG (greenhouse gas) emissions in China: A review , 2014 .

[18]  Ming Huo,et al.  Low temperature spray combustion of acetone–butanol–ethanol (ABE) and diesel blends , 2014 .

[19]  Lennox Siwale,et al.  Performance, combustion and emission characteristics of n-butanol additive in methanol–gasoline blend fired in a naturally-aspirated spark ignition engine , 2014 .

[20]  Mingfa Yao,et al.  Effects of n-butanol, 2-butanol, and methyl octynoate addition to diesel fuel on combustion and emissions over a wide range of exhaust gas recirculation (EGR) rates , 2013 .

[21]  Vladimir A. Alekseev,et al.  Laminar burning velocity of gasoline and the gasoline surrogate components iso-octane, n-heptane and toluene , 2013 .

[22]  Yu-Cheng Chang,et al.  Green energy: Water-containing acetone–butanol–ethanol diesel blends fueled in diesel engines , 2013 .

[23]  Haji Hassan Masjuki,et al.  Effect of ethanol–gasoline blend on NOx emission in SI engine , 2013 .

[24]  Philippe Soucaille,et al.  Metabolic engineering of Clostridium acetobutylicum ATCC 824 for the high-yield production of a biofuel composed of an isopropanol/butanol/ethanol mixture. , 2013, Metabolic engineering.

[25]  P. Claassen,et al.  "In situ" removal of isopropanol, butanol and ethanol from fermentation broth by gas stripping. , 2013, Bioresource technology.

[26]  Shilu Tong,et al.  Ambient air pollution, climate change, and population health in China. , 2012, Environment international.

[27]  Alessio Frassoldati,et al.  An Experimental and Kinetic Modeling Study of Pyrolysis and Combustion of Acetone–Butanol–Ethanol (ABE) Mixtures , 2012 .

[28]  Scott Rozelle,et al.  Liquid biofuels in China: Current status, government policies, and future opportunities and challenges , 2012 .

[29]  Chao Jin,et al.  Progress in the production and application of n-butanol as a biofuel , 2011 .

[30]  O. Doğan.  The influence of n-butanol/diesel fuel blends utilization on a small diesel engine performance and emissions , 2011 .

[31]  F. Egolfopoulos,et al.  Studies of n-propanol, iso-propanol, and propane flames , 2011 .

[32]  S. Hochgreb,et al.  Measurements of laminar flame speeds of acetone/methane/air mixtures , 2011 .

[33]  Charles K. Westbrook,et al.  A comparative experimental and computational study of methanol, ethanol, and n-butanol flames , 2010 .

[34]  S. Szwaja,et al.  Combustion of n-butanol in a spark-ignition IC engine , 2010 .

[35]  Lisa Graham,et al.  Emissions from light duty gasoline vehicles operating on low blend ethanol gasoline and E85 , 2008 .

[36]  Avinash Kumar Agarwal,et al.  Biofuels (alcohols and biodiesel) applications as fuels for internal combustion engines , 2007 .

[37]  M. A. Ceviz,et al.  Cyclic variations on LPG and gasoline-fuelled lean burn SI engine , 2006 .

[38]  N. M. Likhterova,et al.  Problems in production of high-octane, unleaded automotive gasolines , 2006 .

[39]  Ronald K. Hanson,et al.  Shock tube determination of ignition delay times in full-blend and surrogate fuel mixtures , 2004 .

[40]  A. A. Abdel-Rahman,et al.  On the emissions from internal-combustion engines: a review , 1998 .

[41]  R. Bata,et al.  A Performance Study of Iso-Butanol-, Methanol-, and Ethanol-Gasoline Blends Using a Single Cylinder Engine , 1993 .

[42]  John B. Heywood,et al.  An Overview of Hydrocarbon Emissions Mechanisms in Spark-Ignition Engines , 1993 .

[43]  Gang Liu,et al.  Thermo-economic multi-objective optimization for a solar-dish Brayton system using NSGA-II and decision making , 2015 .

[44]  Yu-Cheng Chang,et al.  Use of water containing acetone–butanol–ethanol for NOx-PM (nitrogen oxide-particulate matter) trade-off in the diesel engine fueled with biodiesel , 2014 .

[45]  Thomas Wallner,et al.  Analytical Assessment of C2–C8 Alcohols as Spark-Ignition Engine Fuels , 2013 .

[46]  K. Lai,et al.  Green supply chain management: pressures, practices and performance within the Chinese automobile industry , 2007 .

[47]  Willard W. Pulkrabek,et al.  Engineering Fundamentals of the Internal Combustion Engine , 1997 .

[48]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .