3D Printing in COVID-19: Productivity Estimation of the Most Promising Open Source Solutions in Emergency Situations

The COVID-19 pandemic has caused a surge of demand for medical supplies and spare parts, which has put pressure on the manufacturing sector. As a result, 3D printing communities and companies are currently operating to ease the breakdown in the medical supply chain. If no parts are available, 3D printing can potentially be used to produce time-critical parts on demand such as nasal swabs, face shields, respirators, and spares for ventilators. A structured search using online sources and feedback from key experts in the 3D printing area was applied to highlight critical issues and to suggest potential solutions. The prescribed outcomes were estimated in terms of cost and productivity at a small and large scale. This study analyzes the number and costs of parts that can be manufactured with a single machine within 24 h. It extrapolates this potential with the number of identical 3D printers in the world to estimate the global potential that can help practitioners, frontline workers, and those most vulnerable during the pandemic. It also proposes alternative 3D printing processes and materials that can be applicable. This new unregulated supply chain has also opened new questions concerning medical certification and Intellectual property rights (IPR). There is also a pressing need to develop new standards for 3D printing of medical parts for the current pandemic, and to ensure better national resilience.

[1]  M. Salmi,et al.  Three-dimensional printed surgical templates for fresh cadaveric osteochondral allograft surgery with dimension verification by multivariate computed tomography analysis. , 2019, The Knee.

[2]  A. Mäkitie,et al.  Main Clinical Use of Additive Manufacturing (Three-Dimensional Printing) in Finland Restricted to the Head and Neck Area in 2016–2017 , 2019, Scandinavian journal of surgery : SJS : official organ for the Finnish Surgical Society and the Scandinavian Surgical Society.

[3]  Edward Livingston,et al.  Sourcing Personal Protective Equipment During the COVID-19 Pandemic. , 2020, JAMA.

[4]  Leading Organizations Through Supply Chain Disruptions: An Exploratory Study of Necessary Traits , 2017 .

[5]  Robert Turtil.  Preparing for the pandemic , 2006, BMJ : British Medical Journal.

[6]  Mika Salmi,et al.  Evaluating the Readiness Level of Additively Manufactured Digital Spare Parts: An Industrial Perspective , 2018, Applied Sciences.

[7]  F. Martina,et al.  Design for Additive Manufacturing , 2019 .

[8]  Nari Lee,et al.  The Private and Non-commercial Use Defence Revisited: The Case of 3D Printing Technologies , 2017 .

[9]  Jan Holmström,et al.  Additive manufacturing in the spare parts supply chain: hub configuration and technology maturity , 2018, Rapid Prototyping Journal.

[10]  Mika Salmi,et al.  Teollisen pikavalmistuksen lääketieteelliset sovellutukset , 2010 .

[11]  Eujin Pei,et al.  Printing spare parts through additive manufacturing: legal and digital business challenges , 2018, Journal of Manufacturing Technology Management.

[12]  Mika Salmi,et al.  Cumulative Inaccuracies in Implementation of Additive Manufacturing Through Medical Imaging, 3D Thresholding, and 3D Modeling: A Case Study for an End-Use Implant , 2020, Applied Sciences.

[13]  S. Chopra,et al.  Reducing the Risk of Supply Chain Disruptions , 2014 .

[14]  Mika Salmi,et al.  [Medical applications of rapid prototyping--three-dimensional bodies for planning and implementation of treatment and for tissue replacement]. , 2010, Duodecim; laaketieteellinen aikakauskirja.

[15]  Irene Roda,et al.  The Perceived Value of Additively Manufactured Digital Spare Parts in the Industry: An Empirical Investigation , 2018, Value Based and Intelligent Asset Management.

[16]  Jan Holmström,et al.  Selective laser melting raw material commoditization: impact on comparative competitiveness of additive manufacturing , 2018, Int. J. Prod. Res..

[17]  Matthias Holweg,et al.  The Limits of 3-D Printing , 2015 .

[18]  Marco Cicciù,et al.  3D Printing beyond Dentistry during COVID 19 Epidemic: A Technical Note for Producing Connectors to Breathing Devices , 2020, Prosthesis.

[19]  Mika Salmi,et al.  Implementation of Industrial Additive Manufacturing: Intelligent Implants and Drug Delivery Systems , 2018, Journal of functional biomaterials.

[20]  Charu Chandra,et al.  Supply chain disruption by Avian flu pandemic for U.S. companies: a case study , 2010, IEEE Engineering Management Review.

[21]  Aekapol Chongvilaivan.  Thailand's 2011 flooding : its impact on direct exports and global supply chains , 2012 .

[22]  Murray H. Loew,et al.  Rapid Prototyping of Reusable 3D-Printed N95 Equivalent Respirators at the George Washington University , 2020 .

[23]  Jan Holmström,et al.  Additive manufacturing in the spare parts supply chain , 2014, Comput. Ind..

[24]  Joshua M. Pearce.  A review of open source ventilators for COVID-19 and future pandemics , 2020, F1000Research.

[25]  Les A. Piegl,et al.  Ten challenges in 3D printing , 2015, Engineering with Computers.

[26]  Mika Salmi,et al.  Rapid Tooling Method for Soft Customized Removable Oral Appliances , 2012, The open dentistry journal.

[27]  Stephen Ison,et al.  A Fiasco of Volcanic Proportions? Eyjafjallajökull and the Closure of European Airspace , 2011 .

[28]  Amir A. Zadpoor,et al.  Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials , 2017, International journal of molecular sciences.