Description and analysis of hand forces in medicine cart pushing tasks.

The primary objectives of this study were to describe and analyze the hand force exertion patterns of experienced nursing home nurses and nursing students during dynamic medicine cart pushing tasks in Initial, Sustained, Turning, and Stopping motion phases. A 2 × 2 × 2 factorial experiment was conducted with 22 participants to estimate the effects of lane congestion, precision cart control, and floor surface on horizontal hand forces. Root mean squared (RMS) lane deviation patterns were also described to provide an indicator of cart handling difficulty across the different study conditions. Descriptive statistics revealed that nurses exerted greater mean hand force (10%) and made more (12%) lane deviation than students and that the highest two-hand forces of 147N were measured in the Turning phase on carpet. Strong correlations between work experience group, body mass, and BMI required that force data for nurses and students be collapsed in analytical models where no group differences existed. Predicted pushing forces on carpeted floor surface were significantly greater than on tile in Initial (14N), Sustained (14N) and Turning (18N), except in stopping where pulling forces were 37N lower. High lane congestion predicted significant peak force increases of 4N and 7N in Sustained and Turning, respectively, but decreased by 20N in Initial. High precision control led to significant decreases in two-hand forces that ranged from 4 to 20N across motion phases. Complex interactions among the experimental factors suggest that work environment (lane congestion and floor surface) and work demands (precision control) should be included in the evaluation of pushing tasks and considered prior to making renovations to nursing home environments.

[1]  Alison M Trinkoff,et al.  Perceived physical demands and reported musculoskeletal problems in registered nurses. , 2003, American journal of preventive medicine.

[2]  Kevin P. Granata,et al.  Low-Back Biomechanics and Static Stability During Isometric Pushing , 2005, Hum. Factors.

[3]  Vincent M Ciriello,et al.  Psychophysically Determined Horizontal and Vertical Forces of Dynamic Pushing on High and Low Coefficient of Friction Floors for Female Industrial Workers , 2005, Journal of occupational and environmental hygiene.

[4]  Karlheinz Schaub,et al.  Physical workload of flight attendants when pushing and pulling trolleys aboard aircraft , 2007 .

[5]  Allard J. van der Beek,et al.  Assessment of exposure to pushing and pulling in epidemiological field studies: An overview of methods, exposure measures, and measurement strategies , 1999 .

[6]  Monique H W Frings-Dresen,et al.  Evaluation of ergonomic adjustments of catering carts to reduce external pushing forces. , 2002, Applied ergonomics.

[7]  C G Drury.  Influence of restricted space on manual materials handling. , 1985, Ergonomics.

[8]  Karlheinz Schaub,et al.  A target-based population approach for determining the risk of injury associated with manual pushing and pulling , 2007 .

[9]  L. Aiken,et al.  Hospital nurse staffing and patient mortality, nurse burnout, and job dissatisfaction. , 2002, JAMA.

[10]  L. Wolf,et al.  An evaluation of a “best practices” musculoskeletal injury prevention program in nursing homes , 2004, Injury Prevention.

[11]  H. Morgenstern,et al.  Dose-response relations between occupational exposures to physical and psychosocial factors and the risk of low back pain , 2004, Occupational and Environmental Medicine.

[12]  Idsart Kingma,et al.  Ltd Registered in England and Wales Registered Number : 1072954 Registered office : , 2011 .

[13]  B Owen,et al.  Reducing back stress to nursing personnel: an ergonomic intervention in a nursing home. , 1992, Ergonomics.

[14]  Sean Gallagher,et al.  Physical limitations and musculoskeletal complaints associated with work in unusual or restricted postures: a literature review. , 2005, Journal of safety research.

[15]  Jaap H van Dieën,et al.  Control of trunk motion following sudden stop perturbations during cart pushing. , 2011, Journal of biomechanics.

[16]  D B Chaffin,et al.  Low-back stresses when learning to use a materials handling device. , 1999, Ergonomics.

[17]  Yuan Zhang,et al.  Work organization and health issues in long-term care centers. , 2011, Journal of gerontological nursing.

[18]  Robert Henning,et al.  A Conceptual Framework for Integrating Workplace Health Promotion and Occupational Ergonomics Programs , 2009, Public health reports.

[19]  A Burdorf,et al.  Exposure assessment strategies for work-related risk factors for musculoskeletal disorders. , 1999, Scandinavian journal of work, environment & health.

[20]  B D Owen,et al.  Preventing injuries using an ergonomic approach. , 2000, AORN journal.

[21]  J W van der Gulden,et al.  Work related risk factors for musculoskeletal complaints in the nursing profession: results of a questionnaire survey. , 1996, Occupational and environmental medicine.

[22]  A J van der Beek,et al.  Gender differences in exerted forces and physiological load during pushing and pulling of wheeled cages by postal workers , 2000, Ergonomics.

[23]  David Rempel,et al.  Measuring the physical demands of work in hospital settings: design and implementation of an ergonomics assessment. , 2006, Applied ergonomics.

[24]  Ira Janowitz,et al.  The association of socioeconomic status and psychosocial and physical workplace factors with musculoskeletal injury in hospital workers. , 2007, American journal of industrial medicine.

[25]  Bente Schibye,et al.  The effect of different surfaces on biomechanical loading of shoulder and lumbar spine during pushing and pulling of two-wheeled containers. , 2002, Applied ergonomics.

[26]  D B Chaffin,et al.  Effect of handle height on lower-back loading in cart pushing and pulling. , 1991, Applied ergonomics.

[27]  J W van der Gulden,et al.  Physical work load and its assessment among the nursing staff in nursing homes. , 1994, Journal of occupational medicine. : official publication of the Industrial Medical Association.

[28]  K. Granata,et al.  Co-contraction recruitment and spinal load during isometric trunk flexion and extension. , 2005, Clinical biomechanics.

[29]  Mao-Jiun J. Wang,et al.  The evaluation of force exertions and muscle activities when operating a manual guided vehicle. , 2010, Applied ergonomics.

[30]  Karlheinz Schaub,et al.  Muscular capabilities and workload of flight attendants for pushing and pulling trolleys aboard aircraft , 2007 .

[31]  Karlheinz Schaub,et al.  Load on the lumbar spine of flight attendants during pushing and pulling trolleys aboard aircraft , 2007 .

[32]  P G Dempsey,et al.  The psychophysical approach to manual materials handling task design. , 1999, Ergonomics.

[33]  Andris Freivalds,et al.  Pushing and pulling carts and two-wheeled hand trucks , 2005 .

[34]  W S Marras,et al.  Spine loading as a function of lift frequency, exposure duration, and work experience. , 2006, Clinical biomechanics.

[35]  Judith D. Singer,et al.  Using SAS PROC MIXED to Fit Multilevel Models, Hierarchical Models, and Individual Growth Models , 1998 .

[36]  Peter M. Smith,et al.  How many employees receive safety training during their first year of a new job? , 2007, Injury Prevention.

[37]  S H Snook,et al.  The design of manual handling tasks: revised tables of maximum acceptable weights and forces. , 1991, Ergonomics.

[38]  Laura Punnett,et al.  Ergonomic and socioeconomic risk factors for hospital workers' compensation injury claims. , 2009, American journal of industrial medicine.

[39]  J. Geiger-Brown,et al.  Health care system changes and reported musculoskeletal disorders among registered nurses. , 2004, American journal of public health.

[40]  Emile Tompa,et al.  Association between the decline in workers' compensation claims and workforce composition and job characteristics in Ontario, Canada. , 2007, American journal of public health.

[41]  R A Haslam,et al.  Initial force and postural adaptations when pushing and pulling on floor surfaces with good and reduced resistance to slipping , 2006, Ergonomics.

[42]  Biman Das,et al.  Ergonomics evaluation and redesign of a hospital meal cart. , 2002, Applied ergonomics.

[43]  M. Frings-Dresen,et al.  Pushing and pulling in relation to musculoskeletal disorders: a review of risk factors. , 1998, Ergonomics.

[44]  Stuart M McGill,et al.  Pushing and pulling: personal mechanics influence spine loads , 2006, Ergonomics.

[45]  Gregory Camilli,et al.  Application of a Method of Estimating DIF for Polytomous Test Items , 1999 .

[46]  Gert S. Faber,et al.  Cart pushing: The effects of magnitude and direction of the exerted push force, and of trunk inclination on low back loading , 2007 .

[47]  J A Oldham,et al.  A Comparison of Dominant and Non-Dominant Hand Strengths , 1999, Journal of hand surgery.

[48]  Vera Yin Bing Yip,et al.  New low back pain in nurses: work activities, work stress and sedentary lifestyle. , 2004, Journal of advanced nursing.

[49]  R. Norman,et al.  A comparison of peak vs cumulative physical work exposure risk factors for the reporting of low back pain in the automotive industry. , 1998, Clinical biomechanics.

[50]  R. Norman,et al.  Biomechanical analysis of peak and cumulative spinal loads during simulated patient-handling activities: a substudy of a randomized controlled trial to prevent lift and transfer injury of health care workers. , 2001, Applied ergonomics.

[51]  Andrés Villaveces,et al.  Hazardous task recognition among U.S. adolescents working in the retail or service industry. , 2010, American journal of industrial medicine.

[52]  K W Al-Eisawi,et al.  Factors affecting minimum push and pull forces of manual carts. , 1999, Applied ergonomics.

[53]  C M Haslegrave,et al.  Usability of manual handling aids for transporting materials. , 1995, Applied ergonomics.