Construction of laboratory stand and regulation in ABS car system

The main aim of this project was to design and construct the laboratory setup to perform testing of the ABS car systems. In this paper a realistic car brake system for a one wheel with suspension is used. Development and implementation of ABS architecture for integrated real-time, embedded control software is described. At the same time, it includes an exploratory study of ABS dynamics model, monitor and sensor system, etc. The architecture design of ABS control system at the graphical programming level is then established. In addition, it provides the rapid prototyping design in ABS car system based on MPC Target and has a strong engineering application value. We emphasize the design methodology of the control system supported by rapid prototyping in Hardware in the Loop structure.

[1]  Tor Arne Johansen,et al.  Gain-scheduled wheel slip control in automotive brake systems , 2003, IEEE Trans. Control. Syst. Technol..

[2]  Vahid Esfahanian,et al.  Design of an Anti-Lock Regenerative Braking System for a Series Hybrid Electric Vehicle , 2011 .

[3]  Prashanth Krishnamurthy,et al.  Modeling and Adaptive Nonlinear Control of Electric Motors , 2003 .

[4]  Jerry H. Ginsberg,et al.  Advanced Engineering Dynamics , 1988 .

[5]  Guo Jingang,et al.  Performance Evaluation of an Anti-Lock Braking System for Electric Vehicles with a Fuzzy Sliding Mode Controller , 2014 .

[6]  Qi Lin,et al.  Rapid prototyping design for UAV flight control system simulation , 2012 .

[7]  Adam Ziebinski,et al.  Soft Core Processor Generated Based on the Machine Code of the Application , 2016, J. Circuits Syst. Comput..

[8]  William S. Levine,et al.  Handbook Of Networked And Embedded Control Systems , 2007 .

[9]  Wolfhard Lawrenz,et al.  CAN system engineering - from theory to practical applications , 1997 .

[10]  R. Kazemi,et al.  Development of a new ABS for passenger cars using dynamic surface control method , 2001, Proceedings of the 2001 American Control Conference. (Cat. No.01CH37148).

[11]  John Baillieul,et al.  Handbook of Networked and Embedded Control Systems , 2005, Handbook of Networked and Embedded Control Systems.

[12]  Farhan A. Salem,et al.  An Antilock-Braking Systems (ABS) Control: A Technical Review , 2011 .

[13]  Jerzy Klamka,et al.  The mathematical model of the human arm as a switched linear system , 2014, 2014 19th International Conference on Methods and Models in Automation and Robotics (MMAR).

[14]  Pieter J. Mosterman,et al.  Model-Based Testing for Embedded Systems , 2011, Computational Analysis, Synthesis, & Design Dynamic Systems.

[15]  Fei-Yue Wang,et al.  Advanced motion control and sensing for intelligent vehicles , 2007 .

[17]  Sophie Keller.  Automotive Control Systems For Engine Driveline And Vehicle , 2016 .

[18]  Aitor J. Garrido,et al.  Low Effort Nuclear Fusion Plasma Control Using Model Predictive Control Laws , 2015 .

[19]  Rajesh Rajamani,et al.  Vehicle dynamics and control , 2005 .

[20]  Reza N. Jazar,et al.  Vehicle Dynamics: Theory and Application , 2009 .

[21]  Aitor J. Garrido,et al.  Robust Sliding Mode Control for Tokamaks , 2012 .

[22]  Tadeusz Szkodny,et al.  The Decreasing of 3D Position Errors in the System of Two Cameras by Means of the Interpolation Method , 2015, ICIRA.