Miniature micro-wire based optical fiber-field access device.

This paper presents an optical fiber-field access device suitable for use in different in-line fiber-optics' systems and fiber-based photonics' components. The proposed device utilizes a thin silica micro-wire positioned in-between two lead-in single mode fibers. The thin micro-wire acts as a waveguide that allows for low-loss interconnection between both lead-in fibers, while providing interaction between the guided optical field and the surrounding medium or other photonic structures. The field interaction strength, total loss, and phase matching conditions can be partially controlled by device-design. The presented all-fiber device is miniature in size and utilizes an all-silica construction. It has mechanical properties suitable for handling and packaging without the need for additional mechanical support or reinforcements. The proposed device was produced using a micromachining method that utilizes selective etching of a purposely-produced phosphorus pentoxide-doped optical fiber. This method is simple, compatible with batch processes, and has good high-volume manufacturing potential.

[1]  Richard Selfridge,et al.  Ink-jetting AJL8/APC for D-fiber electric field sensors. , 2009, Applied optics.

[2]  Denis Donlagic.  All-fiber micromachined microcell. , 2011, Optics letters.

[3]  D. Donlagic,et al.  In-line higher order mode filters based on long highly uniform fiber tapers , 2006, Journal of Lightwave Technology.

[4]  M. Mansuripur,et al.  Evanescent field-based optical fiber sensing device for measuring the refractive index of liquids in microfluidic channels. , 2005, Optics letters.

[5]  F. Arregui,et al.  Design of Humidity Sensors Based on Tapered Optical Fibers , 2006, Journal of Lightwave Technology.

[6]  A. Matsko,et al.  Optical resonators with whispering-gallery modes-part I: basics , 2006, IEEE Journal of Selected Topics in Quantum Electronics.

[7]  Bing Zhu,et al.  Reversible All-Optical Modulation Based on Evanescent Wave Absorption of a Single-Mode Fiber With Azo-Polymer Overlay , 2010, IEEE Photonics Technology Letters.

[8]  Shinji Yamashita,et al.  Carbon nanotube mode lockers with enhanced nonlinearity via evanescent field interaction in D-shaped fibers. , 2007, Optics letters.

[9]  Kartik Srinivasan,et al.  Efficient spectroscopy of single embedded emitters using optical fiber taper waveguides. , 2009, Optics express.

[10]  Richard H Selfridge,et al.  Optical D-fiber-based volatile organic compound sensor. , 2007, Applied optics.

[11]  C A Millar,et al.  Exposed-core single-mode-fiber channel-dropping filter using a high-index overlay waveguide. , 1987, Optics letters.

[12]  Aaron R Hawkins,et al.  Surface-relief fiber Bragg gratings for sensing applications. , 2006, Applied optics.

[13]  Richard H Selfridge,et al.  Polarization analysis of surface-relief D-fiber Bragg gratings. , 2007, Applied optics.

[14]  P. M. Shankar,et al.  Evanescent sensing of biomolecules and cells , 2003 .

[15]  Peng-Chun Peng,et al.  Optically controllable side-polished fiber attenuator with photoresponsive liquid crystal overlay. , 2009, Optics express.

[16]  Cheng-Ling Lee,et al.  Leakage coupling of ultrasensitive periodical silica thin-film long-period grating coated on tapered fiber. , 2010, Optics letters.

[17]  F. P. Payne,et al.  The single mode tapered optical fibre loop immunosensor , 1994 .

[18]  K Vahala,et al.  Highly efficient optical power transfer to whispering-gallery modes by use of a symmetrical dual-coupling configuration. , 2000, Optics letters.

[19]  Yi-Fang Lin,et al.  Fiber-optic chemical and biochemical probes based on localized surface plasmon resonance , 2006 .

[20]  T. A. Birks,et al.  Tapered fibres embedded in silica aerogel , 2009, 2009 Conference on Lasers and Electro-Optics and 2009 Conference on Quantum electronics and Laser Science Conference.

[21]  J. Noda,et al.  Novel fiber coupler tapering process using a microheater , 1992, IEEE Photonics Technology Letters.

[22]  K. Srinivasan,et al.  Fiber-based cryogenic and time-resolved spectroscopy of PbS quantum dots. , 2010, Optics express.

[23]  S. Arnold,et al.  Morphology-dependent resonances of a microsphere-optical fiber system. , 1996, Optics letters.

[24]  S. A. Cassidy,et al.  D-fibre filter for erbium gain spectrum flattening , 1992 .

[25]  Hamid Latifi,et al.  Measuring bacterial growth by refractive index tapered fiber optic biosensor. , 2010, Journal of photochemistry and photobiology. B, Biology.

[26]  T. Lee,et al.  Evanescent-wave excitation of surface-enhanced Raman scattering substrates by an optical-fiber taper. , 2009, Optics letters.

[27]  S G Lee,et al.  Fabrication of a side-polished fiber polarizer with a biref ringent polymer overlay. , 1997, Optics letters.

[28]  P. M. Shankar,et al.  Fabrication of biconical tapered optical fibers using hydrofluoric acid , 2003 .

[29]  S. Ho,et al.  Design and modeling of waveguide-coupled single-mode microring resonators , 1998 .

[30]  D. L. Rode,et al.  Precision fabrication of D-shaped single-mode optical fibers by in situ monitoring , 1994 .

[31]  M. Andrés,et al.  In-line polarizers and filters made of metal-coated tapered fibers: resonant excitation of hybrid plasma modes , 1998, IEEE Photonics Technology Letters.

[32]  Wesley D Sacher,et al.  Hydrofluoric acid flow etching of low-loss subwavelength-diameter biconical fiber tapers. , 2010, Optics express.

[33]  Soumyo Mukherji,et al.  Evanescent wave absorbance based fiber optic biosensor for label-free detection of E. coli at 280 nm wavelength. , 2011, Biosensors & bioelectronics.

[34]  M. Jeong,et al.  Simultaneous Measurement of Refractive Index, Temperature, and Strain Using Etched-Core Fiber Bragg Grating Sensors , 2010, IEEE Photonics Technology Letters.

[35]  E. Cibula,et al.  Micromachining of Optical Fibers Using Selective Etching Based on Phosphorus Pentoxide Doping , 2011, IEEE Photonics Journal.

[36]  S. Arnold,et al.  Excitation of resonances of microspheres on an optical fiber. , 1995, Optics letters.

[37]  Richard H Selfridge,et al.  Low loss elliptical core D-fiber to PANDA fiber fusion splicing. , 2008, Optics express.

[38]  Y. Jeong,et al.  Wide, tunable band rejection filter based on micro-optical waveguide on microactuating platform covering O, E, S, C, L, and U bands. , 2011, Optics letters.

[39]  David J. Richardson,et al.  Optical fiber nanowires and microwires: fabrication and applications , 2009 .

[40]  Kenneth O. Hill,et al.  Low-loss highly overcoupled fused couplers: Fabrication and sensitivity to external pressure , 1988 .

[41]  Jae-Won Song,et al.  Tunable in-line fiber optic comb filter using a side-polished single-mode fiber coupler with LiNbO3 overlay and intermediate coupling layer , 2002 .

[42]  M. Mansuripur,et al.  Biconical Fiber Taper Sensors , 2006, IEEE Photonics Technology Letters.

[43]  Xianfeng Chen,et al.  Fiber-optic evanescent field modulator using a magnetic fluid as the cladding , 2006 .

[44]  J.-P. Laine,et al.  Etch-eroded fiber coupler for whispering-gallery-mode excitation in high-Q silica microspheres , 1999, IEEE Photonics Technology Letters.