Radiometric calibration stability assessment for the RISAT-1 SAR sensor using a deployed point target array at the Desalpar site, Rann of Kutch, India

ABSTRACT Synthetic aperture radar (SAR) data used for quantitative temporal and/or spatial analysis requires calibration to ensure that observed pixel values of amplitude and phase can be related to the geophysical parameters of interest. The process of radiometric calibration of SAR images involves comparison of the backscattered radar reflectivity signal from a ground resolution element containing a calibration target of known signal response, such as a corner reflector. In this study, absolute radiometric calibration of RISAT-1 intensity data of fine resolution stripmap-1 (FRS-1) and medium resolution ScanSAR (MRS) mode was carried out by utilizing array of standard point targets of various types (triangular trihedral, square trihedral, and dihedral) with known radar cross-section deployed prior to satellite overpass with precise azimuth and elevation angles in Desalpar, Rann of Kutch in western India. The derived calibration constants using the integral method were then compared with the values provided in the header file. Deviations in the results are reported in this article. The results obtained show that the difference between the estimated average calibration constants for FRS-1 and MRS mode data with the provided value was found to be within the absolute radiometric accuracy specification of Radar Imaging SATellite (RISAT-1). Near-range to far-range difference of 0.1–0.2 dB for HH (Horizontal transmit, Horizontal receive) polarization and 0.1–0.3 dB for HV (Horizontal transmit, Vertical receive) polarization was estimated for the same scene using distributed target analysis indicating the stability of calibration for the same scene. This study also concluded that Desalpar site in Rann of Kutch has the potential of being an operational SAR calibration site.

[1]  Masanobu Shimada,et al.  Calibration and validation of polarimetric ALOS2 , 2015, 2015 IEEE International Geoscience and Remote Sensing Symposium (IGARSS).

[2]  Paul Siqueira,et al.  The JERS Amazon Multi-season Mapping Study (JAMMS): Observation strategies and data characteristics , 2002 .

[3]  Fawwaz Ulaby,et al.  External Calibration of SIR-B Imagery with Area-Extended and Point Targets , 1986, IEEE Transactions on Geoscience and Remote Sensing.

[4]  Lars M. H. Ulander,et al.  Absolute radiometric calibration of the CCRS SAR , 1991, IEEE Trans. Geosci. Remote. Sens..

[5]  J. Marchand,et al.  SAR Image Quality Assessment , 1993 .

[6]  Santanu Chowdhury,et al.  An approach to evaluate and monitor RISAT-1 SAR from level-0 raw data , 2014 .

[7]  Marco Schwerdt,et al.  Independent Verification of the Sentinel-1A System Calibration , 2014, IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing.

[8]  Kevin Murnaghan,et al.  RADARSAT-1 image quality and calibration — Continuing success in extended mission , 2003 .

[9]  Yves-Louis Desnos,et al.  The development and first results from the ESTEC ERS-1 active radar calibration unit , 1992, IEEE Trans. Geosci. Remote. Sens..

[10]  P. W. Vachon,et al.  Synthetic aperture radar calibration using reference reflectors , 1990 .

[11]  T. I. Lukowski,et al.  Plans for RADARSAT image data calibration , 1996 .

[12]  I.M.H. Ulander.  Accuracy of using point targets for SAR calibration , 1991 .

[13]  Anthony Freeman,et al.  SAR calibration: an overview , 1992, IEEE Trans. Geosci. Remote. Sens..

[14]  Masanobu Shimada,et al.  PALSAR Radiometric and Geometric Calibration , 2007, IEEE Transactions on Geoscience and Remote Sensing.

[15]  T. I. Lukowski,et al.  RADARSAT-1 image quality and calibration — a continuing success , 2001 .

[16]  M. Zink,et al.  Next Generation SAR - External Calibration. , 1995 .

[17]  Marco Schwerdt,et al.  Sentinel-1A Calibration Support during Routine Operation using innovative Point Targets , 2015 .

[18]  Tapan Misra,et al.  Synthetic Aperture Radar payload on-board RISAT-1 : configuration , technology and performance , 2013 .

[19]  Evert Attema,et al.  Stability of Amazon Backscatter at C-Band: Spaceborne Results from ERS-1/2 and RADARSAT-1. , 2000 .

[20]  Marco Schwerdt,et al.  TerraSAR-X Calibration Ground Equipment , 2007 .

[21]  Kamal Sarabandi,et al.  SIR-C data quality and calibration results , 1995, IEEE Trans. Geosci. Remote. Sens..

[22]  Tapan Misra,et al.  RISAT-1: Configuration and performance evaluation , 2014, 2014 XXXIth URSI General Assembly and Scientific Symposium (URSI GASS).