Curved holographic optical elements and applications for curved see-through displays

ABSTRACT Holographic optical elements (HOEs) have been used as important tools for implementing augmented reality (AR) and see-through displays because they are transparent and thin. Moreover, as HOEs usually come in the shape of a thin film, they can be bent, used for coating, or attached to curved surfaces. While they can be used to implement curved AR displays, however, the applications of the curved HOE have not been sufficiently studied. In this paper, an analysis method for curved/bent HOEs using the coupled-wave theory and the numerical ray tracing method is introduced. Using this method, the influence of the surface curvature on the optical characteristics of HOEs, including the aberration and diffraction efficiency, was analyzed. Also presented herein is a method of designing the optimal curvature that can reduce the aberration. Curved HOEs can be applied to see-through displays such as head-mounted displays (HMDs), head-up displays (HUDs), or transparent screens. They can be used to expand the field of view (FOV) and to reduce the form factor. The proposed analysis method provides a useful guideline for designing practical curved see-through displays.

[1]  P. Alam ‘K’ , 2021, Composites Engineering.

[2]  Higher order aberrations in holographic lenses. , 1982, Applied optics.

[3]  Zach DeVito,et al.  Opt , 2017 .

[4]  N. Uchida Calculation of diffraction efficiency in hologram gratings attenuated along the direction perpendicular to the grating vector , 1973 .

[5]  James R. Fienup,et al.  Computer-Originated Aspheric Holographic Optical Elements , 1982 .

[6]  Byoungho Lee,et al.  A frontal projection-type three-dimensional display. , 2012, Optics express.

[7]  H. Kogelnik Coupled wave theory for thick hologram gratings , 1969 .

[8]  Dongwoo Kang,et al.  Quantification model of proper curvature for large-sized curved TVs , 2015 .

[9]  Changwon Jang,et al.  Retinal 3D , 2017, ACM Trans. Graph..

[10]  E. Champagne Nonparaxial Imaging, Magnification, and Aberration Properties in Holography* , 1967 .

[11]  Gang Li,et al.  Full Color Holographic Optical Element Fabrication for Waveguide-type Head Mounted Display Using Photopolymer , 2013 .

[12]  Justin R. Lawrence,et al.  Photopolymer holographic recording material , 2001 .

[13]  Nonparaxial theory of curved holograms. , 1986, Applied optics.

[14]  Byoungho Lee,et al.  Full-color lens-array holographic optical element for three-dimensional optical see-through augmented reality. , 2014, Optics letters.

[15]  Byoungho Lee,et al.  Holographic display for see-through augmented reality using mirror-lens holographic optical element. , 2016, Optics letters.

[16]  J. N. Latta Fifth-order hologram aberrations. , 1971, Applied optics.

[17]  Jean-Paul Hugonin,et al.  Algorithm for the rigorous coupled-wave analysis of grating diffraction , 1994 .

[18]  B. J. Chang,et al.  Dichromated gelatin for the fabrication of holographic optical elements. , 1979, Applied optics.

[19]  Pacific Conference on Computer Graphics and Applications , 2006 .

[20]  W S Colburn,et al.  Volume hologram formation in photopolymer materials. , 1971, Applied optics.

[21]  N Davidson,et al.  Aberration-free imaging with an aplanatic curved diffractive element. , 2001, Applied optics.

[22]  Aberration coefficients of curved holographic optical elements. , 1986, Applied optics.

[23]  T. Gaylord,et al.  Rigorous coupled-wave analysis of planar-grating diffraction , 1981 .

[24]  A. Georgiou,et al.  Wedge guides and pupil steering for mixed reality , 2018 .

[25]  Nadine Gottschalk,et al.  Fundamentals Of Photonics , 2016 .

[26]  T. Shankoff Phase holograms in dichromated gelatin. , 1968, Applied optics.

[27]  Byoungho Lee,et al.  Two-dimensional and three-dimensional transparent screens based on lens-array holographic optical elements. , 2014, Optics express.

[28]  Katsuyuki Akutsu,et al.  A full‐color eyewear display using planar waveguides with reflection volume holograms , 2009 .

[29]  Reinhard W. Meier,et al.  Magnification and Third-Order Aberrations in Holography* , 1965 .

[30]  Yasuo Tomita,et al.  Far-off-Bragg reconstruction of volume holographic gratings: A comparison of experiment and theories , 2013, 1305.0416.

[31]  Byeonghwa Choi,et al.  A study on the optimum curvature for the curved monitor , 2015 .

[32]  Andreas Georgiou,et al.  Holographic near-eye displays for virtual and augmented reality , 2017, ACM Trans. Graph..

[33]  Byoungho Lee,et al.  Additive light field displays , 2016, ACM Trans. Graph..

[34]  Yongtian Wang,et al.  Portable waveguide display system with a large field of view by integrating freeform elements and volume holograms. , 2015, Optics express.

[35]  Andrew G. Glen,et al.  APPL , 2001 .

[36]  B. Batterman,et al.  Dynamical Diffraction of X Rays by Perfect Crystals , 1964 .

[37]  Vincent Moreau,et al.  Characterization of dupont photopolymer: determination of kinetic parameters in a diffusion model. , 2002, Applied optics.

[38]  General form for aberration coefficients in holography , 1984 .

[39]  Andreas Simon,et al.  The i-Cone/spl trade/ - a panoramic display system for virtual environments , 2002, 10th Pacific Conference on Computer Graphics and Applications, 2002. Proceedings..

[40]  J. W. Eastes,et al.  Phase holograms formed by silver halide (sensitized) gelatin processing. , 1980, Applied optics.

[41]  D. H. Close Holographic Optical Elements , 1975 .

[42]  友紀子 中川 SoC , 2021, Journal of Japan Society for Fuzzy Theory and Intelligent Informatics.

[43]  S. Min,et al.  Viewing-angle-enhanced integral imaging system using a curved lens array. , 2004, Optics express.

[44]  Bernard C. Kress,et al.  11‐1: Invited Paper: Towards the Ultimate Mixed Reality Experience: HoloLens Display Architecture Choices , 2017 .

[45]  sophie o’brien Dig , 2021, Encyclopedic Dictionary of Archaeology.