Folded dielectric elastomer actuators

Polymer-based linear actuators with contractile ability are currently demanded for several types of applications. Within the class of dielectric elastomer actuators, two basic configurations are available today for such a purpose: the multi-layer stack and the helical structure. The first consists of several layers of elementary planar actuators stacked in series mechanically and parallel electrically. The second configuration relies on a couple of helical compliant electrodes alternated with a couple of helical dielectrics. The fabrication of both these configurations presents some specific drawbacks today, arising from the peculiarity of each structure. Accordingly, the availability of simpler solutions may boost the short-term use of contractile actuators in practical applications. For this purpose, a new configuration is here described. It consists of a monolithic structure made of an electroded sheet, which is folded up and compacted. The resulting device is functionally equivalent to a multi-layer stack with interdigitated electrodes. However, with respect to a stack the new configuration is advantageously not discontinuous and can be manufactured in one single phase, avoiding layer-by-layer multi-step procedures. The development and preliminary testing of prototype samples of this new actuator made of a silicone elastomer are presented here.

[1]  Rachel Z. Pytel,et al.  Artificial muscle technology: physical principles and naval prospects , 2004, IEEE Journal of Oceanic Engineering.

[2]  Helmut F. Schlaak,et al.  Novel multilayer electrostatic solid state actuators with elastic dielectric (Invited Paper) , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[3]  Q. Pei,et al.  High-field deformation of elastomeric dielectrics for actuators , 2000 .

[4]  Q. Pei,et al.  High-speed electrically actuated elastomers with strain greater than 100% , 2000, Science.

[5]  Danilo De Rossi,et al.  Dielectric elastomer cylindrical actuators: electromechanical modelling and experimental evaluation , 2004 .

[6]  Ron Pelrine,et al.  High-Strain Actuator Materials Based on Dielectric Elastomers , 2000 .

[7]  Q. Pei,et al.  Electroelastomer rolls and their application for biomimetic walking robots , 2003 .

[8]  R. Pelrine,et al.  Electrostriction of polymer dielectrics with compliant electrodes as a means of actuation , 1998 .

[9]  Ron Pelrine,et al.  Multiple-degrees-of-freedom electroelastomer roll actuators , 2004 .

[10]  D. Rossi,et al.  Improvement of electromechanical actuating performances of a silicone dielectric elastomer by dispersion of titanium dioxide powder , 2005, IEEE Transactions on Dielectrics and Electrical Insulation.

[11]  D. Rossi,et al.  Helical dielectric elastomer actuators , 2005 .

[12]  Yoseph Bar-Cohen,et al.  Electroactive Polymer (EAP) Actuators as Artificial Muscles: Reality, Potential, and Challenges, Second Edition , 2004 .

[13]  R. Pelrine,et al.  Actuation Response of Polyacrylate Dielectric Elastomers , 2003 .