The objective of this paper is to describe a method of current measurement by using sensor without magnetic core based on the principle of Hall sensor. This method doesn't use any robust ferrite magnetic field concentrators. The measurement system is protected towards the external disturbances by signal processing. The field sensors are connected directly to the DSP board. This current measurement system is designed for measuring in the field of power electronic devices. Therefore it must fulfil the requirements for galvanic isolation, DC and AC current sensing, high frequency bandwidth (more than 30 kHz), overloading and high electromagnetic disturbance immunity. The outputs of sensors are computed by the DSP algorithms. The expansion interface of all peripheral circuits was designed and proved. The standard evaluation kit with TMS320F2812 made by Texas Instruments is used.
[1]
Pavel Brandstetter,et al.
Microcomputer control system for industrial electronics applications
,
2009,
2009 Applied Electronics.
[2]
L. Osmancfk,et al.
Digital Signal Processor TMS320F2812 and Its Application in Electric Drives
,
2006,
2006 International Conference on Applied Electronics.
[3]
Pavel Brandstetter,et al.
Procedure to Choose Alternative ANN in the Control of Electrical Drive
,
2008,
2008 7th Computer Information Systems and Industrial Management Applications.
[4]
T. Sagara,et al.
Magnetoresistive Sensors
,
1993,
IEEE Translation Journal on Magnetics in Japan.
[5]
P. Brandstetter,et al.
Rotor time constant adaptation using Radial Basis Function network
,
2008,
2008 13th International Power Electronics and Motion Control Conference.