Enhancement of energy conversion and emission reduction of Calophyllum inophyllum biodiesel in diesel engine using reactivity controlled compression ignition strategy and TOPSIS optimization

[1]  Banglin Deng,et al.  Role of particle oxidation catalyst on emission reduction of a non-road diesel engine: A multi case study , 2022, Chemical Engineering Science.

[2]  G. Nagarajan,et al.  Performance and emissions of hexanol-biodiesel fuelled RCCI engine with double injection strategies , 2022, Energy.

[3]  J. Ge,et al.  Effect of injection timing on combustion, emission and particle morphology of an old diesel engine fueled with ternary blends at low idling operations , 2022, Energy.

[4]  A. Hoang,et al.  Experimental assessment on performance and combustion behaviors of reactivity-controlled compression ignition engine operated by n-pentanol and cottonseed biodiesel , 2021, Journal of Cleaner Production.

[5]  Guirong Wu,et al.  Comparative study of pilot–main injection timings and diesel/ethanol binary blends on combustion, emission and microstructure of particles emitted from diesel engines , 2021, Fuel.

[6]  C. Sasikumar,et al.  Effect of Aluminium Oxide Nano Additive on Diesel along with Gasoline Fumigation in Single Cylinder Diesel Engine , 2021 .

[7]  D. Balasubramanian,et al.  Potential improvement in conventional diesel combustion mode on a common rail direct injection diesel engine with PODE/WCO blend as a high reactive fuel to achieve effective Soot-NOx trade-off , 2021, Journal of Cleaner Production.

[8]  Kandamaran Krishnamurthy,et al.  MULTI-RESPONSE OPTIMIZATION ON ABRASIVE WATERJET MACHINING OF GLASS FIBER REINFORCED PLASTICS USING TAGUCHI METHOD COUPLED WITH TOPSIS , 2021, Surface Review and Letters.

[9]  H. Aydin.  An innovative research on variable compression ratio in RCCI strategy on a power generator diesel engine using CNG-safflower biodiesel , 2021 .

[10]  S. K. Mahla,et al.  Application of clean gaseous fuels in compression ignition engine under dual fuel mode: A technical review and Indian perspective , 2021 .

[11]  Ali Kaya Gur,et al.  MULTI-RESPONSE OPTIMIZATION OF END-MILLING PARAMETERS FOR INCONEL 625 USING TAGUCHI COUPLED WITH TOPSIS , 2021, Surface Review and Letters.

[12]  V. Soloiu,et al.  n-Butanol and Oleic Acid Methyl Ester, Combustion and NVH Characteristics In Reactivity Controlled Compression Ignition , 2020 .

[13]  B. Ashok,et al.  Effect of diethyl ether and ethanol as an oxygenated additive on Calophyllum inophyllum biodiesel in CI engine , 2020, Environmental Science and Pollution Research.

[14]  V. S. Yaliwal,et al.  Experimental studies on performance and emission characteristics of reactivity controlled compression ignition (RCCI) engine operated with gasoline and Thevetia Peruviana biodiesel , 2020 .

[15]  A. Ramanathan,et al.  Recycling of waste engine oil through pyrolysis process for the production of diesel like fuel and its uses in diesel engine , 2020 .

[16]  A. Ramanathan,et al.  Assessment of pyrolysis waste engine oil as an alternative fuel source for diesel engine , 2020, Journal of Thermal Analysis and Calorimetry.

[17]  H. Kim,et al.  Optimization of palm oil biodiesel blends and engine operating parameters to improve performance and PM morphology in a common rail direct injection diesel engine , 2020 .

[18]  Zhi-xia He,et al.  Experimental study of combustion and emission characteristics of gasoline compression ignition (GCI) engines fueled by gasoline-hydrogenated catalytic biodiesel blends , 2019, Energy.

[19]  G. Duraisamy,et al.  Statistical and experimental investigation of single fuel reactivity controlled compression ignition combustion on a non-road diesel engine , 2019, Energy Conversion and Management.

[20]  Haifeng Liu,et al.  Effects of injection strategies on low‐speed marine engines using the dual fuel of high‐pressure direct‐injection natural gas and diesel , 2019, Energy Science & Engineering.

[21]  R. Murugan,et al.  Experimental investigation of iso-butanol/diesel reactivity controlled compression ignition combustion in a non-road diesel engine , 2019, Applied Energy.

[22]  Hüseyin Aydın,et al.  Investigation on the effects of gasoline reactivity controlled compression ignition application in a diesel generator in high loads using safflower biodiesel blends , 2019, Renewable Energy.

[23]  Banglin Deng,et al.  The effect of air/fuel ratio on the CO and NOx emissions for a twin-spark motorcycle gasoline engine under wide range of operating conditions , 2019, Energy.

[24]  S. Gupta,et al.  Experimental investigations to reduce unburned emissions in reactivity controlled compression ignition through fuel modifications , 2019, Applied Thermal Engineering.

[25]  K. Balamurugan,et al.  Effects of nano-copper additive on performance, combustion and emission characteristics of Calophyllum inophyllum biodiesel in CI engine , 2018, Journal of Thermal Analysis and Calorimetry.

[26]  M. Pandian,et al.  Comparison of different low temperature combustion strategies in a light duty air cooled diesel engine , 2018, Applied Thermal Engineering.

[27]  M. Hoseinpour,et al.  Evaluation of the effect of gasoline fumigation on performance and emission characteristics of a diesel engine fueled with B20 using an experimental investigation and TOPSIS method , 2018, Fuel.

[28]  J. Gokulachandran,et al.  Prediction of remaining useful life of cutting tools: a comparative study using soft computing methods , 2018 .

[29]  Y. Sharma,et al.  Process optimization, kinetics of production Jatropha curcus methyl ester, and its utilization in single cylinder diesel engine , 2018 .

[30]  Li Xin,et al.  An experimental investigation on multi-cylinder RCCI engine fueled with 2-butanol/diesel , 2017 .

[31]  Barat Ghobadian,et al.  Energy and exergy analyses of a diesel engine fueled with diesel, biodiesel-diesel blend and gasoline fumigation , 2017 .

[32]  Hüseyin Aydın,et al.  Analysis of ethanol RCCI application with safflower biodiesel blends in a high load diesel power generator , 2016 .

[33]  Haozhong Huang,et al.  An experimental study on the combustion and emission characteristics of a diesel engine under low temperature combustion of diesel/gasoline/n-butanol blends , 2016 .

[34]  M. Jia,et al.  Towards a comprehensive understanding of the influence of fuel properties on the combustion characteristics of a RCCI (reactivity controlled compression ignition) engine , 2016 .

[35]  K. Mohandas,et al.  Prediction of cutting tool life based on Taguchi approach with fuzzy logic and support vector regression techniques , 2015 .

[36]  Su Han Park,et al.  Bioethanol and gasoline premixing effect on combustion and emission characteristics in biodiesel dual-fuel combustion engine , 2014 .

[37]  Orhan Durgun,et al.  Improving of diesel combustion-pollution-fuel economy and performance by gasoline fumigation , 2013 .

[38]  Seokjoo Kwon,et al.  An experimental and modelling study of the combustion and emission characteristics for gasoline–diesel dual-fuel engines , 2011 .

[39]  Rolf D. Reitz,et al.  An Experimental Investigation of Fuel Reactivity Controlled PCCI Combustion in a Heavy-Duty Engine , 2010 .

[40]  Anand Krishnasamy,et al.  Experimental investigation on operating light-duty diesel engine using ethanol–gasoline blends in a homogeneous charge compression ignition combustion mode , 2022, Fuel.

[41]  B. Deepanraj,et al.  Feasibility study on raw Simarouba glauca oil as an alternate fuel in a diesel engine and comparative assessment with its esterified oil , 2022, Fuel.

[42]  B. Ashok,et al.  Effect of engine operating parameters in NOx reduction , 2022, NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines.

[43]  T. Ayyasamy,et al.  Production, performance and emission analysis of Tamanu oil - diesel blends along with biogas in a diesel engine in dual cycle mode , 2018 .

[44]  Orhan Durgun,et al.  Theoretical investigation of heat balance in direct injection (DI) diesel engines for neat diesel fuel and gasoline fumigation , 2009 .