Sulfate ingress in Portland cement

The interaction of mortar with sulfate solutions leads to a reaction front within the porous material and to expansion. Thermodynamic modelling coupled with transport codes was used to predict sulfate ingress. Alternatively, “pure” thermodynamic models – without consideration of transport – were used as a fast alternative to coupled models: they are more flexible and allow easy parameter variations but the results relate neither to distance nor to time. Both transport and pure thermodynamic modelling gave comparable results and were able to reproduce the changes observed in experiments. The calculated total volume of the solids did not exceed the initial volume of the paste indicating that not the overall volume restriction leads to the observed expansion but rather the formation of ettringite within the matrix and the development of crystallisation pressure in small pores. The calculations indicate that periodic changing of the Na2SO4 solution results in more intense degradation.

[1]  John A. Winpigler,et al.  Developing a More Rapid Test to Assess Sulfate Resistance of Hydraulic Cements , 2005, Journal of research of the National Institute of Standards and Technology.

[2]  David Planel.  Les effets couplés de la précipitation d'espèces secondaires sur le comportement mécanique et la dégradation chimique des bétons , 2002 .

[3]  G. Verbeck,et al.  Structures and Physical Properties of Cement Paste , 1968 .

[4]  K. Scrivener,et al.  Mechanisms of chemical degradation of cement-based systems: proceedings of the Materials Research Society's Symposium on Mechanisms of Chemical Degradation of Cement-based Systems, Boston, USA, 27-30 November 1995 , 1997 .

[5]  P. Brown,et al.  An evaluation of the sulfate resistance of cements in a controlled environment , 1981 .

[6]  E. Samson,et al.  Durability of concrete — Degradation phenomena involving detrimental chemical reactions , 2008 .

[7]  F. Adenot,et al.  Modelling of the corrosion of the cement paste by deionized water , 1992 .

[8]  Edgardo F. Irassar,et al.  MICROSTRUCTURAL STUDY OF SULFATE ATTACK ON ORDINARY AND LIMESTONE PORTLAND CEMENTS AT AMBIENT TEMPERATURE , 2003 .

[9]  B. Bary,et al.  On Estimating the Effective Diffusive Properties of Hardened Cement Pastes , 2008 .

[10]  M. Moranville,et al.  Physicochemical equilibria of cement-based materials in aggressive environments—experiment and modeling , 2004 .

[11]  C. Sabelli,et al.  The crystal structure of syngenite, K2Ca(SO4)2 · H2O , 1967 .

[12]  H. Cao,et al.  THE EFFECT OF CEMENT COMPOSITION AND PH OF ENVIRONMENT ON SULFATE RESISTANCE OF PORTLAND CEMENTS AND BLENDED CEMENTS , 1997 .

[13]  B. Bary.  Simplified coupled chemo‐mechanical modeling of cement pastes behavior subjected to combined leaching and external sulfate attack , 2008 .

[14]  B. Lothenbach,et al.  Thermodynamic Modelling of the Effect of Temperature on the Hydration and Porosity of Portland Cement , 2008 .

[15]  T. Schmidt.  Sulfate attack and the role of internal carbonate on the formation of thaumasite , 2007 .

[16]  Jan Skalny,et al.  Materials science of concrete , 1989 .

[17]  W. Węglewski,et al.  Chemically Assisted Damage of Concrete: A Model of Expansion Under External Sulfate Attack , 2009 .

[18]  J. Marchand,et al.  Theoretical analysis of the effect of weak sodium sulfate solutions on the durability of concrete , 2002 .

[19]  F. J. Pearson,et al.  Development and application of the Nagra/PSI Chemical Thermodynamic Data Base 01/01 , 2002, Geological Society, London, Special Publications.

[20]  B. Lothenbach,et al.  Thermodynamic modelling of the hydration of Portland cement , 2006 .

[21]  B. Franke.  Bestimmung von Calciumoxyd und Calciumhydroxyd neben wasserfreiem und wasserhaltigem Calciumsilikat , 1941 .

[22]  E. Samson,et al.  Predicting the durability of Portland cement systems in aggressive environments—Laboratory validation , 2004 .

[23]  V. S. Tripathi,et al.  A critical evaluation of recent developments in hydrogeochemical transport models of reactive multichemical components , 1989 .

[24]  G. Saoût,et al.  Influence of limestone on the hydration of Portland cements , 2008 .

[25]  R. P. Khatri,et al.  Role of permeability in sulphate attack , 1997 .

[26]  B. Lothenbach,et al.  A thermodynamic approach to the hydration of sulphate-resisting Portland cement. , 2006, Waste management.

[27]  D. Pellegrini,et al.  Coupled modeling of cement/claystone interactions and radionuclide migration. , 2004, Journal of contaminant hydrology.

[28]  Patrick Goblet,et al.  Module-oriented modeling of reactive transport with HYTEC , 2003 .

[29]  P. Le Bescop,et al.  Long-term performance of cement paste during combined calcium leaching–sulfate attack: kinetics and size effect , 2006 .

[30]  G. Scherer.  Stress from crystallization of salt , 2004 .

[31]  External sulphate attack by ground water , 2006 .

[32]  B. Lothenbach,et al.  Physical and microstructural aspects of sulfate attack on ordinary and limestone blended Portland cements , 2009 .

[33]  Jeffrey J. Thomas,et al.  A colloidal interpretation of chemical aging of the C-S-H gel and its effects on the properties of cement paste , 2006 .

[34]  P. Montarnal,et al.  Modelling and simulations of the chemo-mechanical behaviour of leached cement-based materials Leaching process and induced loss of stiffness , 2009 .

[35]  Barzin Mobasher,et al.  Modeling of damage in cement-based materials subjected to external sulfate attack. I: Formulation , 2003 .