Determination of charge transfer resistance and capacitance of microbial fuel cell through a transient response analysis of cell voltage.

An alternative method for determining the charge transfer resistance and double-layer capacitance of microbial fuel cells (MFCs), easily implemented without a potentiostat, was developed. A dynamic model with two parameters, the charge transfer resistance and double-layer capacitance of electrodes, was derived from a linear differential equation to depict the current generation with respect to activation overvoltage. This model was then used to fit the transient cell voltage response to the current step change during the continuous operation of a flat-plate type MFC fed with acetate. Variations of the charge transfer resistance and the capacitance value with respect to the MFC design conditions (biocatalyst existence and electrode area) and operating parameters (acetate concentration and buffer strength in the catholyte) were then determined to elucidate the validity of the proposed method. This model was able to describe the dynamic behavior of the MFC during current change in the activation loss region; having an R(2) value of over 0.99 in most tests. Variations of the charge transfer resistance value (thousands of Omega) according to the change of the design factors and operational factors were well-correlated with the corresponding MFC performances. However, though the capacitance values (approximately 0.02 F) reflected the expected trend according to the electrode area change and catalyst property, they did not show significant variation with changes in either the acetate concentration or buffer strength.

[1]  P. R. Pathapati,et al.  A new dynamic model for predicting transient phenomena in a PEM fuel cell system , 2005 .

[2]  K. Nealson,et al.  The use of electrochemical impedance spectroscopy (EIS) in the evaluation of the electrochemical properties of a microbial fuel cell. , 2008, Bioelectrochemistry.

[3]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[4]  Bruce E. Rittmann,et al.  Kinetics of consumption of fermentation products by anode-respiring bacteria , 2007, Applied Microbiology and Biotechnology.

[5]  Allen J. Bard,et al.  Electrochemical Methods: Fundamentals and Applications , 1980 .

[6]  B. Min,et al.  Electricity generation using membrane and salt bridge microbial fuel cells. , 2005, Water research.

[7]  Peng Liang,et al.  Composition and distribution of internal resistance in three types of microbial fuel cells , 2007, Applied Microbiology and Biotechnology.

[8]  H. Rismani-Yazdi,et al.  Cathodic limitations in microbial fuel cells: An overview , 2008 .

[9]  Jae Kyung Jang,et al.  Improving the dynamic response of a mediator-less microbial fuel cell as a biochemical oxygen demand (BOD) sensor , 2004, Biotechnology Letters.

[10]  Byung Hong Kim,et al.  Use of acetate for enrichment of electrochemically active microorganisms and their 16S rDNA analyses. , 2003, FEMS microbiology letters.

[11]  Zhen He,et al.  An upflow microbial fuel cell with an interior cathode: assessment of the internal resistance by impedance spectroscopy. , 2006, Environmental science & technology.

[12]  Zhen He,et al.  Exploring the use of electrochemical impedance spectroscopy (EIS) in microbial fuel cell studies , 2009 .

[13]  H. Hamelers,et al.  Effects of membrane cation transport on pH and microbial fuel cell performance. , 2006, Environmental science & technology.

[14]  Byung Hong Kim,et al.  Challenges in microbial fuel cell development and operation , 2007, Applied Microbiology and Biotechnology.

[15]  A. Manohar,et al.  The internal resistance of a microbial fuel cell and its dependence on cell design and operating conditions , 2009 .

[16]  Stefano Freguia,et al.  Microbial fuel cells: methodology and technology. , 2006, Environmental science & technology.

[17]  Thomas F. Edgar,et al.  Process Dynamics and Control , 1989 .

[18]  Richard M. Dinsdale,et al.  Development of a tubular microbial fuel cell (MFC) employing a membrane electrode assembly cathode , 2009 .

[19]  Hong Liu,et al.  Quantification of the internal resistance distribution of microbial fuel cells. , 2008, Environmental science & technology.

[20]  Sebastián Dormido,et al.  Diagnosis of PEM Fuel Cells through Current Interruption , 2007 .

[21]  Willy Verstraete,et al.  Minimizing losses in bio-electrochemical systems: the road to applications , 2008, Applied Microbiology and Biotechnology.

[22]  G. Gil,et al.  Operational parameters affecting the performannce of a mediator-less microbial fuel cell. , 2003, Biosensors & bioelectronics.

[23]  C. Melhuish,et al.  Microbial fuel cells based on carbon veil electrodes: Stack configuration and scalability , 2008 .

[24]  Byung Hong Kim,et al.  Continuous electricity production from artificial wastewater using a mediator-less microbial fuel cell. , 2006, Bioresource technology.