Hybrid DC–DC Converter With Phase-Shift or Frequency Modulation for NEV Battery Charger

This paper suggests a new hybrid dc-dc converter for a neighborhood electric vehicle battery charger. The proposed converter is based on the conventional phase-shift full-bridge (PSFB) converter with center-tap rectifier. By integrating an LLC series resonant converter into the conventional PSFB converter, the proposed converter has many advantages like wide soft-switching range without duty-cycle loss, zero-current-switching operation of rectifying diodes, minimized circulating current, reduced size of filter inductor, and much better transformer utilization than before presented hybrid dc-dc converters. The proposed converter can be modulated in phase-shift manner or frequency variation. The feasibility of the proposed converter has been verified with the experimental results under an output voltage range of 36-72 V dc at 1 kW.

[1]  Gun-Woo Moon,et al.  Half-Bridge Integrated ZVS Full-Bridge Converter With Reduced Conduction Loss for Electric Vehicle Battery Chargers , 2014, IEEE Transactions on Industrial Electronics.

[2]  Haoyu Wang,et al.  Maximum Efficiency Point Tracking Technique for $LLC$-Based PEV Chargers Through Variable DC Link Control , 2014, IEEE Transactions on Industrial Electronics.

[3]  Gun-Woo Moon,et al.  Analysis and Design of Phase-Shifted Dual H-Bridge Converter With a Wide ZVS Range and Reduced Output Filter , 2013, IEEE Transactions on Industrial Electronics.

[4]  Jih-Sheng Lai,et al.  Zero-Voltage-Switching PWM Resonant Full-Bridge Converter With Minimized Circulating Losses and Minimal Voltage Stresses of Bridge Rectifiers for Electric Vehicle Battery Chargers , 2013, IEEE Transactions on Power Electronics.

[5]  Jih-Sheng Lai,et al.  Hybrid Resonant and PWM Converter With High Efficiency and Full Soft-Switching Range , 2012, IEEE Transactions on Power Electronics.

[6]  Donald Grahame Holmes,et al.  Design of a Soft-Switched 6-kW Battery Charger for Traction Applications , 2007 .

[7]  Murray Edington,et al.  An automotive on-board 3.3 kW battery charger for PHEV application , 2011, 2011 IEEE Vehicle Power and Propulsion Conference.

[8]  G. Moschopoulos,et al.  A Nonlinear Controller Based on a Discrete Energy Function for an AC/DC Boost PFC Converter , 2013, IEEE Transactions on Power Electronics.

[9]  P. T. Krein,et al.  Review of Battery Charger Topologies, Charging Power Levels, and Infrastructure for Plug-In Electric and Hybrid Vehicles , 2013, IEEE Transactions on Power Electronics.

[10]  Murray Edington,et al.  An Automotive Onboard 3.3-kW Battery Charger for PHEV Application , 2012, IEEE Transactions on Vehicular Technology.

[11]  Akshay Kumar Rathore,et al.  Industrial Electronics for Electric Transportation , 2015, IEEE Trans. Ind. Electron..

[12]  Chuang Liu,et al.  High-Efficiency Hybrid Full-Bridge–Half-Bridge Converter With Shared ZVS Lagging Leg and Dual Outputs in Series , 2013, IEEE Transactions on Power Electronics.

[13]  Gun-Woo Moon,et al.  Soft-Switching DC/DC Converter With a Full ZVS Range and Reduced Output Filter for High-Voltage Applications , 2013, IEEE Transactions on Power Electronics.

[14]  Gun-Woo Moon,et al.  Phase-Shifted PWM Converter With a Wide ZVS Range and Reduced Circulating Current , 2013, IEEE Transactions on Power Electronics.

[15]  Jae Seung Lee,et al.  A High-Density, High-Efficiency, Isolated On-Board Vehicle Battery Charger Utilizing Silicon Carbide Power Devices , 2014, IEEE Transactions on Power Electronics.

[16]  Gun-Woo Moon,et al.  The $k$-Q Analysis for an LLC Series Resonant Converter , 2014, IEEE Transactions on Power Electronics.

[17]  Min-Jung Kim,et al.  Adjustable Frequency–Duty-Cycle Hybrid Control Strategy for Full-Bridge Series Resonant Converters in Electric Vehicle Chargers , 2014, IEEE Transactions on Industrial Electronics.