Aeroelastic Response of Composite Helicopter Rotor with Random Material Properties

This study investigates the effect of uncertainty in composite material properties on the cross-sectional stiffness properties, natural frequencies, and aeroelastic responses of a composite helicopter rotor blade. The elastic moduli and Poisson’s ratio of the composite material are considered as random variables with a coefficient of variation of around 4%, which was taken from published experimental work. An analytical box beam model is used for evaluating blade cross-sectional properties. Aeroelastic analysis based on finite elements in space and time is used to evaluate the helicopter rotor blade response in forward flight. The stochastic cross-sectional and aeroelastic analyses are carried out with Monte Carlo simulations. It is found that the blade cross-sectional stiffness matrix elements show a coefficient of variation of about 6%. The nonrotating rotor blade natural frequencies show a coefficient of variation of around 3%. The impact of material uncertainty on rotating natural frequencies varies from that on nonrotating blade frequencies because of centrifugal stiffening. The propagation of material uncertainty into aeroelastic response causes large deviations, particularly in the higher-harmonic components that are critical for the accurate prediction of helicopter blade loads and vibration. The numerical results clearly show the need to consider randomness of composite material properties in the helicopter aeroelastic analysis.

[1]  D. Yadav,et al.  Buckling of composite circular cylindrical shells with random material properties , 1997 .

[2]  S. Sarkani,et al.  Stochastic analysis of structural and mechanical vibrations , 1996 .

[3]  Inderjit Chopra,et al.  Comparison of Calculated Vibratory Rotor Hub Loads with Experimental Data , 1998 .

[4]  Robert E. Hansford,et al.  A Unified Formulation of Rotor Load Prediction Methods , 1986 .

[5]  Ranjan Ganguli,et al.  Aeroelastic Stability Enhancement and Vibration Suppression in a Composite Helicopter Rotor , 2005 .

[6]  Phadeon-Stelios Koutsourelakis,et al.  Effect of material uncertainties on fatigue life calculations of aircraft fuselages: A cohesive element model , 2006 .

[7]  Ranjan Ganguli,et al.  Survey of Recent Developments in Rotorcraft Design Optimization , 2004 .

[8]  D. Yadav,et al.  Forced nonlinear vibration of laminated composite plates with random material properties , 2005 .

[9]  Ranjan Ganguli,et al.  Target vector optimization of composite box beam using real-coded genetic algorithm: a decomposition approach , 2006 .

[10]  Ryohei Ishida.  Stochastic Finite Element Analysis of Beam with Statistical Uncertainties , 2001 .

[11]  Carlos E. S. Cesnik,et al.  VABS: A New Concept for Composite Rotor Blade Cross-Sectional Modeling , 1995 .

[12]  Chris L. Pettit,et al.  Uncertainty Quantification in Aeroelasticity: Recent Results and Research Challenges , 2004 .

[13]  Earl H. Dowell,et al.  Stochastic Analysis of a Nonlinear Aeroelastic Model Using the Response Surface Method , 2006 .

[14]  Hyeonsoo Yeo,et al.  Assessment of Comprehensive Analysis Calculation of Airloads on Helicopter Rotors , 2005 .

[15]  Ranjan Ganguli,et al.  OPTIMUM DESIGN OF A HELICOPTER ROTOR FOR LOW VIBRATION USING AEROELASTIC ANALYSIS AND RESPONSE SURFACE METHODS , 2002 .

[16]  E. Smith,et al.  Formulation and evaluation of an analytical model for composite box-beams , 1991 .

[17]  N.G.R. Iyengar,et al.  Free vibration of composite cylindrical panels with random material properties , 2002 .

[18]  Carlos E. S. Cesnik,et al.  Assessment of Beam Modeling Methods for Rotor Blade Applications , 2001 .

[19]  Ranjan Ganguli,et al.  On the effect of progressive damage on composite helicopter rotor system behavior , 2007 .

[20]  Inderjit Chopra,et al.  CFD/CSD Prediction of Rotor Vibratory Loads in High-Speed Flight , 2006 .

[21]  Michał Kleiber,et al.  The Stochastic Finite Element Method: Basic Perturbation Technique and Computer Implementation , 1993 .

[22]  Tae-Uk Kim,et al.  Reliability analysis of composite wing subjected to gust loads , 2004 .

[23]  Donald L. Kunz,et al.  Comprehensive Rotorcraft Analysis: Past, Present, and Future , 2005 .

[24]  M. Borri,et al.  Helicopter rotor dynamics by finite element time approximation , 1986 .

[25]  Helmut J. Pradlwarter,et al.  Realistic and efficient reliability estimation for aerospace structures , 2005 .

[26]  Edward C. Smith,et al.  Aeroelastic response, loads, and stability of a composite rotor in forward flight , 1993 .

[27]  Inderjit Chopra,et al.  Refined Structural Dynamics Model for Composite Rotor Blades , 2001 .

[28]  Chris L. Pettit,et al.  Effects of Parametric Uncertainty on Airfoil Limit Cycle Oscillation , 2003 .

[29]  N.G.R. Iyengar,et al.  Analysis of composite plates with random material characteristics , 1993 .

[30]  Humberto Contreras,et al.  The stochastic finite-element method , 1980 .

[31]  D. Yadav,et al.  Non-linear response statistics of composite laminates with random material properties under random loading , 2003 .

[32]  Peretz P. Friedmann,et al.  Rotary wing aeroelasticity - A historical perspective , 2003 .

[33]  John Vorwald,et al.  Dynamics Workshop On Rotor Vibratory Loads Prediction , 1998 .

[34]  Peretz P. Friedmann,et al.  Rotary-wing aeroelasticity - Current status and future trends , 2001 .

[35]  Chris L. Pettit,et al.  Effects of Uncertainty on Nonlinear Plate Aeroelastic Response , 2002 .

[36]  Inderjit Chopra,et al.  Aeroelastic optimization of a helicopter rotor to reduce vibration and dynamic stresses , 1996 .

[37]  W. P. De Wilde,et al.  The use of Monte Carlo techniques in statistical finite element methods for the determination of the structural behaviour of composite materials structural components , 1995 .