Optimization in scaling fiber-coupled laser-diode end-pumped lasers to higher power: influence of thermal effect

The optimum mode-to-pump ratio in scaling fiber-coupled laser-diode end-pumped lasers to higher power has been investigated by including the thermal effect into the space-dependent rate equation analysis. The optical path difference (OPD) distribution has been derived as a function of the pump-beam quality, focus position of pumping light, and pump radius at the focal plane under the assumption that the end faces of the crystal are thermally insulated. The diffraction losses arising from thermally induced spherical aberration have been estimated by the Strehl intensity ratio. The present results for the optimum mode-to-pump ratio are markedly different from previous analyses in which thermal effects are neglected. Here, the optimum mode-to-pump ratio is a decreasing function of input pump power, and is less than unity in the case of a slightly high pump power. The practical example of a Nd:YAG laser pumped by a 13-W fiber-coupled laser diode is considered to confirm our physical analysis.

[1]  Heinz P. Weber,et al.  Thermal beam distortions in end-pumped Nd:YAG, Nd:GSGG, and Nd:YLF rods , 1994 .

[2]  Yung-Fu Chen,et al.  Optimization of fiber-coupled laser-diode end-pumped lasers: influence of pump-beam quality , 1996 .

[3]  C. Gaeta,et al.  Theoretical analysis of optical fiber laser amplifiers and oscillators. , 1985, Applied optics.

[4]  J. Zayhowski,et al.  Frequency tuning of microchip lasers using pump-power modulation , 1992 .

[5]  D. Sipes,et al.  Highly efficient neodymium:yttrium aluminum garnet laser end pumped by a semiconductor laser array , 1985 .

[6]  Tso Yee Fan,et al.  Pump source requirements for end-pumped lasers , 1990 .

[7]  R L Byer,et al.  Diode laser--pumped solid-state lasers. , 1988, Science.

[8]  H Hemmati,et al.  3.5-W Q-switched 532-nm Nd:YAG laser pumped with fiber-coupled diode lasers. , 1994, Optics letters.

[9]  Tingye Li,et al.  Modes in a maser interferometer with curved and tilted mirrors , 1963 .

[10]  P. A. Schulz,et al.  Liquid-nitrogen-cooled Ti:Al/sub 2/O/sub 3/ laser , 1991 .

[11]  Yung-Fu Chen,et al.  Analytical model for the design of fiber-coupled laser-diode end-pumped lasers , 1997 .

[12]  P. Laporta,et al.  Design criteria for mode size optimization in diode-pumped solid-state lasers , 1991 .

[13]  David F. Welch,et al.  High power, high efficient neodymium:yttrium aluminum garnet laser end pumped by a laser diode array , 1987 .

[14]  A. K. Cousins,et al.  Temperature and thermal stress scaling in finite-length end-pumped laser rods , 1992 .

[15]  Chandrasekhar Roychoudhuri,et al.  Design approaches for laser-diode material-processing systems using fibers and micro-optics , 1994 .

[16]  S. Timoshenko,et al.  Theory of elasticity , 1975 .

[17]  Y. Kaneda,et al.  7.6 W of continuous-wave radiation in a TEM(00) mode from a laser-diode end-pumped Nd:YAG laser. , 1992, Optics letters.

[18]  Emil Wolf,et al.  Principles of Optics: Contents , 1999 .

[19]  R. A. Fields,et al.  Thermal modeling of continuous‐wave end‐pumped solid‐state lasers , 1990 .

[20]  D. Welch,et al.  Fiber-bundle coupled, diode end-pumped Nd:YAG laser. , 1988, Optics letters.