On forming limit stress diagram analysis

Abstract Forming Limit Stress Diagrams (FLSDs) have been intensively studied and have been considered as being path-independent. This paper carries out a detailed study to examine the path-dependency of FLSDs based on different non-proportional loading histories, which are combinations of two linear strain paths. All simulations are based on crystal plasticity theory in conjunction with the M–K approach. It is confirmed that the Forming Limit Diagram (FLD) and the FLSD are two mathematically equivalent representations of forming limits in strain-space and stress-space, respectively. While the FLD is very sensitive to strain path changes, the FLSD is much less path-dependent. It is suggested that the FLSD is much more favourable than the FLD in representing forming limits in the numerical simulation of sheet metal forming processes. The nature of the effect of a strain path change on forming limits is investigated in terms of the transition work hardening behaviour upon the path change, and the concept of the FLSD.

[1]  Siegfried S. Hecker,et al.  Formability of Aluminum Alloy Sheets , 1975 .

[2]  Kenneth W. Neale,et al.  SIMULATION OF THE BEHAVIOUR OF FCC POLYCRYSTALS DURING REVERSED TORSION , 1996 .

[3]  Kenneth W. Neale,et al.  Evaluation of anisotropic yield functions for aluminum sheets , 2003 .

[4]  Amit K. Ghosh,et al.  Effects of strain path changes on the formability of sheet metals , 1978 .

[5]  R. Sowerby,et al.  A theoretical and experimental investigation of limit strains in sheet metal forming , 1996 .

[6]  Thomas B. Stoughton,et al.  Review of theoretical models of the strain-based FLD and their relevance to the stress-based FLD , 2004 .

[7]  R. Asaro,et al.  Overview no. 42 Texture development and strain hardening in rate dependent polycrystals , 1985 .

[8]  Kenneth W. Neale,et al.  Limit strain predictions for strain-rate sensitive anisotropic sheets , 1980 .

[9]  S. Macewen,et al.  On Alternative Representation of Forming Limits , 2000 .

[10]  Viggo Tvergaard,et al.  Effect of strain path change on limits to ductility of anisotropic metal sheets , 2000 .

[11]  W. Hosford,et al.  Effect of changing strain paths on forming limit diagrams of Al 2008-T4 , 1993 .

[12]  William F. Hosford,et al.  The influence of strain-path changes on forming limit diagrams of A1 6111 T4 , 1994 .

[13]  E. Giessen,et al.  Effects of strain paths on sheet metal limit strains , 1998 .

[14]  Z. Marciniak,et al.  Limit strains in the processes of stretch-forming sheet metal , 1967 .

[15]  Kenneth W. Neale,et al.  Predictions of forming limit diagrams using a rate-sensitive crystal plasticity model , 1995 .

[16]  R. Arrieux,et al.  Determination and use of the forming limit stress diagrams in sheet metal forming , 1995 .

[17]  Y. Chastel,et al.  Forming limits prediction using rate-independent polycrystalline plasticity , 2002 .

[18]  R. Hill.  A theory of the yielding and plastic flow of anisotropic metals , 1948, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[19]  Thomas B. Stoughton,et al.  A general forming limit criterion for sheet metal forming , 2000 .

[20]  Z. Zimniak,et al.  Implementation of the forming limit stress diagram in FEM simulations , 2000 .

[21]  R. Arrieux,et al.  Use of two behaviour laws for the determination of the forming-limit stress diagram of a thin steel sheet: results and comparisons , 2000 .

[22]  E. Giessen,et al.  Crystal plasticity forming limit diagram analysis of rolled aluminum sheets , 1998 .

[23]  Albert Van Bael,et al.  Prediction of forming limit strains under strain-path changes: Application of an anisotropic model based on texture and dislocation structure , 1998 .

[24]  E. van der Giessen,et al.  On crystal plasticity FLD analysis , 1997, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[25]  Michel Vermeulen,et al.  Statistical evaluation of the uncertainty of experimentally characterised forming limits of sheet steel. , 2001 .

[26]  W. Hosford,et al.  Effect of changing strain paths on , 1993, Metallurgical and Materials Transactions A.