Experimental study of hole-flanging by single-stage incremental sheet forming

Abstract Recent studies show the capability of single-point incremental forming to successfully perform hole-flanging operations using multi-stage strategies. However, multi-stage strategies are time-consuming and, according to the geometrical and surface constraints of the part, the number of stages for obtaining a fully functional piece should be minimized. The aim of this work is to investigate the ability of the SPIF process to perform hole-flanges in a single stage, contributing to a better understanding of the formability of the sheet in this demanding situation. To this end, a series of experimental tests with 7075-O aluminium alloy sheets is performed. Three different tool radii are used to study the bending effect on failure. For the higher tool radius, an incipient postponed necking is observed in the wall of the flange, followed by ductile fracture; otherwise, necking is completely inhibited. The physical mechanisms controlling sheet failure during the process are analysed and discussed. Finally, the beneficial effects of the spindle speed on the thickness profile, surface roughness and forming force are also investigated.

[1]  Chen Yang,et al.  Dieless incremental hole-flanging of thin-walled tube for producing branched tubing , 2014 .

[2]  Ahmed Hadj Kacem,et al.  Blank-holding effect on the hole-flanging process of sheet aluminum alloy , 2011 .

[3]  G. Centeno,et al.  On the study of the single-stage hole-flanging process by SPIF , 2015 .

[4]  G. Centeno,et al.  Critical analysis of necking and fracture limit strains and forming forces in single-point incremental forming , 2014 .

[5]  Tong Wen,et al.  Bi-directional dieless incremental flanging of sheet metals using a bar tool with tapered shoulders , 2016 .

[6]  Dongkai Xu,et al.  Mechanism investigation for the influence of tool rotation and laser surface texturing (LST) on formability in single point incremental forming , 2013 .

[7]  Ghulam Hussain,et al.  Threshold tool-radius condition maximizing the formability in SPIF considering a variety of materials: Experimental and FE investigations , 2015 .

[8]  Joost Duflou,et al.  Asymmetric single point incremental forming of sheet metal , 2005 .

[9]  F. J. García-Lomas,et al.  Assessment of the effect of the through-thickness strain/stress gradient on the formability of stretch-bend metal sheets , 2013 .

[10]  Paulo A.F. Martins,et al.  A new approach for deformation history of material elements in hole-flanging produced by single point incremental forming , 2013 .

[11]  P. Martins,et al.  Formability limits by fracture in sheet metal forming , 2014 .

[12]  B. Lu,et al.  Analytical and experimental investigations on deformation mechanism and fracture behavior in single point incremental forming , 2014 .

[13]  Jian Cao,et al.  Mechanism investigation of friction-related effects in single point incremental forming using a developed oblique roller-ball tool , 2014 .

[14]  Mahdi Fakoor,et al.  A New Mixed-Mode Fracture Criterion for Orthotropic Materials, Based on Strength Properties , 2011 .

[15]  Ahmed Hadj Kacem,et al.  Failure prediction in the hole-flanging process of aluminium alloys , 2013 .

[16]  Paulo A.F. Martins,et al.  Strategies and limits in multi-stage single-point incremental forming , 2010 .

[17]  Niels Bay,et al.  Failure mechanisms in single-point incremental forming of metals , 2011 .

[18]  Paul A. Meehan,et al.  Deformation mechanics and efficient force prediction in single point incremental forming , 2015 .

[19]  Feliks Stachowicz.  Estimation of hole-flange ability for deep drawing steel sheets , 2008 .

[20]  A. H. van den Boogaard,et al.  An overview of stabilizing deformation mechanisms in incremental sheet forming , 2009 .

[21]  Paf Martins,et al.  On the formability of hole-flanging by incremental sheet forming , 2013 .

[22]  Niels Bay,et al.  Single‐point incremental forming and formability—failure diagrams , 2008 .

[23]  Carpóforo Vallellano,et al.  A Study to Predict Failure in Biaxially Stretched Sheets of Aluminum Alloy 2024-T3 , 2008 .

[24]  J. Duflou,et al.  Thickness improvement in single point incremental forming deduced by sequential limit analysis , 2014 .

[25]  Ahmed Hadj Kacem,et al.  Finite element analysis of hole-flanging process with various anisotropy assumptions , 2015 .

[26]  Antonio Formisano,et al.  The influence of tool rotation on an incremental forming process , 2009 .

[27]  Paulo A.F. Martins,et al.  Recent Approaches for the Determination of Forming Limits by Necking and Fracture in Sheet Metal Forming , 2015 .

[28]  P. Meehan,et al.  Experimental investigation of mechanical properties, formability and force measurement for AA7075-O aluminum alloy sheets formed by incremental forming , 2013 .

[29]  A. J. Martínez-Donaire,et al.  New approaches to detect the onset of localised necking in sheets under through-thickness strain gradients , 2014 .

[30]  Paf Martins,et al.  On the relative performance of hole-flanging by incremental sheet forming and conventional press-working , 2014 .

[31]  Z. Cui,et al.  Studies on hole-flanging process using multistage incremental forming , 2010 .

[32]  Paulo A.F. Martins,et al.  Hole-flanging by incremental sheet forming , 2012 .

[33]  P. Martins,et al.  Plastic flow and failure in single point incremental forming of PVC sheets , 2014 .

[34]  Markus Bambach,et al.  A New Process Design for Performing Hole-flanging Operations by Incremental Sheet Forming , 2014 .