Time–frequency beamforming for nondestructive evaluations of plate using ultrasonic Lamb wave

Abstract The objective of this study is to detect structural defect locations in a plate by exciting the plate with a specific ultrasonic Lamb wave and recording reflective wave signals using a piezoelectric transducer array. For the purpose of eliminating the effects of the direct excitation signals as well as the boundary-reflected wave signals, it is proposed to improve a conventional MUSIC beamforming procedure by processing the measured signals in the time–frequency domain. In addition, a normalized, damped, cylindrical 2-D steering vector is proposed to increase the spatial resolution of time–frequency MUSIC power results. A cross-shaped array is selected to further improve the spatial resolution and to avoid mirrored virtual image effects. Here, it is experimentally demonstrated that the proposed time–frequency MUSIC beamforming procedure can be used to identify structural defect locations on an aluminum plate by distinguishing the defect-induced waves from the excitation-generated and boundary-reflected waves.

[1]  F. Fahy.  Sound and structural vibration , 1985 .

[2]  Chun H. Wang,et al.  A synthetic time-reversal imaging method for structural health monitoring , 2004 .

[3]  E. Crawley,et al.  Use of piezoelectric actuators as elements of intelligent structures , 1987 .

[4]  Lingyu Yu,et al.  Lamb Wave-Mode Tuning of Piezoelectric Wafer Active Sensors for Structural Health Monitoring , 2007 .

[5]  Yong-Joe Kim,et al.  Planar nearfield acoustical holography in moving fluid medium at subsonic and uniform velocity. , 2010, The Journal of the Acoustical Society of America.

[6]  Victor Giurgiutiu,et al.  Embedded-ultrasonics Structural Radar for In Situ Structural Health Monitoring of Thin-wall Structures , 2004 .

[7]  A. Devaney,et al.  Time-reversal imaging with multiple signal classification considering multiple scattering between the targets , 2004 .

[8]  J. Rose.  Ultrasonic Waves in Solid Media , 1999 .

[9]  D. Schindel,et al.  Air-coupled ultrasonic NDE of bonded aluminum lap joints , 1997 .

[10]  P.D. Wilcox,et al.  Omni-directional guided wave transducer arrays for the rapid inspection of large areas of plate structures , 2003, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[11]  Yong-Joe Kim,et al.  Three-dimensional visualizations of open fan noise fields , 2012 .

[12]  Hoon Sohn,et al.  Combination of a Time Reversal Process and a Consecutiv Outlier Analysis for Baseline-free Damage Diagnosis , 2006 .

[13]  Joseph L. Rose,et al.  A Baseline and Vision of Ultrasonic Guided Wave Inspection Potential , 2002 .

[14]  E. Crawley,et al.  Detailed models of piezoceramic actuation of beams , 1989 .

[15]  Don H. Johnson,et al.  Array Signal Processing: Concepts and Techniques , 1993 .

[16]  Yong-Joe Kim,et al.  Improved Statistically Optimal Nearfield Acoustical Holography in subsonically moving fluid medium , 2012 .

[17]  Moeness G. Amin,et al.  Time-frequency MUSIC , 1999, IEEE Signal Processing Letters.

[18]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[19]  Yang-Hann Kim,et al.  Spherical beam-forming and music methods for the estimation of location and strength of spherical sound sources , 1995 .

[20]  Jianlong Li,et al.  Experimental investigation of selective localisation by decomposition of the time reversal operator and subspace-based technique , 2008 .

[21]  V. Giurgiutiu.  Tuned Lamb Wave Excitation and Detection with Piezoelectric Wafer Active Sensors for Structural Health Monitoring , 2005 .

[22]  Lin Ye,et al.  Guided Lamb waves for identification of damage in composite structures: A review , 2006 .

[23]  Joseph L. Rose,et al.  Guided wave phased array beam steering in composite plates , 2007, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[24]  Leonardo Lecce,et al.  Application of the Beam-Forming Technique for Damage Detection in Composite Plate , 2012 .

[25]  Yong-Joe Kim,et al.  Partial sound field decomposition in multireference near-field acoustical holography by using optimally located virtual references , 2004 .

[26]  Victor Giurgiutiu,et al.  Lamb wave generation with piezoelectric wafer active sensors for structural health monitoring , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[27]  Roy Ikegami,et al.  Structural health management for aging aircraft , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[28]  Peter Cawley,et al.  Guided wave diffraction tomography within the born approximation , 2010, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[29]  Wei Zhao,et al.  Active sensor wave propagation health monitoring of beam and plate structures , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[30]  Chun H. Wang,et al.  Computerized time-reversal method for structural health monitoring , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.