Tailored design of renewable copolymers based on poly(1,4-butylene 2,5-furandicarboxylate) and poly(ethylene glycol) with refined thermal properties

In the recent years, search for innovative polymers derived from renewable resources resulted in an intense research and development of 2,5-furandicarboxylic acid-based polyesters. Special emphasis has been placed in high-performance polyesters, such as the poly(1,4-butylene 2,5-furandicarboxylate) (PBF)-based structures. In this study, both thermal and crystallisation-thermal properties of PBF have been enlarged simply by the incorporation of other renewable soft moieties in the polymer structure, namely, poly(ethylene glycol) (PEG) moieties. In particular, these novel copolymers can be designed to show some advantageous processing features as revealed by the lower melting temperature (in particular, it could be 107 °C) and higher thermal stability (up to 352–380 °C) as compared with PBF. Moreover, fast scanning calorimetric (FSC) studies of these novel copolymers indicated that crystallisation could be prevented even using relatively slow cooling rates (e.g., 0.1 °C s−1). The judicious selection and balance between hard PBF and soft PEG units enabled a segmented copolymer behaviour.

[1]  M. Meier,et al.  Poly(1,20-eicosanediyl 2,5-furandicarboxylate), a biodegradable polyester from renewable resources , 2017 .

[2]  A. Sousa,et al.  Improving the Thermal Properties of Poly(2,5‐furandicarboxylate)s Using Cyclohexylene Moieties: A Comparative Study , 2017 .

[3]  C. Ciulik,et al.  Fully bio-based aromatic–aliphatic copolyesters: poly(butylene furandicarboxylate-co-succinate)s obtained by ring opening polymerization , 2017 .

[4]  Jinggang Wang,et al.  Modification of poly(ethylene 2,5-furandicarboxylate) with 1,4-cyclohexanedimethylene: Influence of composition on mechanical and barrier properties , 2016 .

[5]  J. Coelho,et al.  Renewable-based poly((ether)ester)s from 2,5-furandicarboxylic acid , 2016 .

[6]  M. Meier,et al.  Renewability is not Enough: Recent Advances in the Sustainable Synthesis of Biomass-Derived Monomers and Polymers. , 2016, Chemistry.

[7]  A. M. D. Ilarduya,et al.  Sustainable Aromatic Copolyesters via Ring Opening Polymerization: Poly(butylene 2,5-furandicarboxylate-co-terephthalate)s , 2016 .

[8]  A. M. D. Ilarduya,et al.  Poly(alkylene 2,5-furandicarboxylate)s (PEF and PBF) by ring opening polymerization , 2016 .

[9]  Zhenhua Li,et al.  Furan-based co-polyesters with enhanced thermal properties: poly(1,4-butylene-co-1,4-cyclohexanedimethylene-2,5-furandicarboxylic acid) , 2016 .

[10]  A. Serra,et al.  New unsaturated copolyesters based on 2,5-furandicarboxylic acid and their crosslinked derivatives , 2016 .

[11]  Jorge F. J. Coelho,et al.  Biobased polyesters and other polymers from 2,5-furandicarboxylic acid: a tribute to furan excellency , 2015 .

[12]  K. Loos,et al.  A biocatalytic approach towards sustainable furanic–aliphatic polyesters , 2015 .

[13]  C. R. Becer,et al.  Lignocellulosic biomass: a sustainable platform for the production of bio-based chemicals and polymers , 2015, 1602.01684.

[14]  J. Schawe.  Measurement of the thermal glass transition of polystyrene in a cooling rate range of more than six decades , 2015 .

[15]  K. Chrissafis,et al.  Thermal degradation kinetics and decomposition mechanism of polyesters based on 2,5-furandicarboxylic acid and low molecular weight aliphatic diols , 2015 .

[16]  J. Pascault,et al.  Bio-based alternatives in the synthesis of aliphatic–aromatic polyesters dedicated to biodegradable film applications , 2015 .

[17]  Wei Zhang,et al.  Synthesis and characterization of bio-based poly(butylene furandicarboxylate)-b-poly(tetramethylene glycol) copolymers , 2014 .

[18]  D. Bikiaris,et al.  Evaluation of polyesters from renewable resources as alternatives to the current fossil-based polymers. Phase transitions of poly(butylene 2,5-furan-dicarboxylate) , 2014 .

[19]  P. Dubois,et al.  Biobased poly(butylene 2,5-furandicarboxylate) and poly(butylene adipate-co- butylene 2,5-furandicarboxylate)s: From synthesis using highly purified 2,5- furandicarboxylic acid to thermo-mechanical properties , 2014 .

[20]  G. Walther.  High-performance polymers from nature: catalytic routes and processes for industry. , 2014, ChemSusChem.

[21]  Jorge F. J. Coelho,et al.  The quest for sustainable polyesters – insights into the future , 2014 .

[22]  D. S. Es,et al.  Biobased furandicarboxylic acids (FDCAs): effects of isomeric substitution on polyester synthesis and properties , 2014 .

[23]  R. Mülhaupt,et al.  Long-chain aliphatic polyesters from plant oils for injection molding, film extrusion and electrospinning , 2014 .

[24]  S. Sorrell,et al.  The future of oil supply , 2014, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[25]  Wei Zhang,et al.  Synthesis, physical properties and enzymatic degradation of bio-based poly (butylene adipate-co-butylene furandicarboxylate) copolyesters , 2013 .

[26]  R. Mülhaupt.  Green Polymer Chemistry and Bio‐based Plastics: Dreams and Reality , 2013 .

[27]  M. Gazzano,et al.  Poly(butylene 2,5-furan dicarboxylate), a Biobased Alternative to PBT: Synthesis, Physical Properties, and Crystal Structure , 2013 .

[28]  Jiping Ma,et al.  Synthesis and crystallinity of poly(butylene 2,5-furandicarboxylate) , 2012 .

[29]  Guangyuan Zhou,et al.  A series of furan‐aromatic polyesters synthesized via direct esterification method based on renewable resources , 2012 .

[30]  A. Gandini,et al.  Synthesis of aliphatic suberin-like polyesters by ecofriendly catalytic systems , 2012 .

[31]  Jiping Ma,et al.  The copolymerization reactivity of diols with 2,5-furandicarboxylic acid for furan-based copolyester materials , 2012 .

[32]  L. Sipos,et al.  Accelerating research into bio-based FDCA-polyesters by using small scale parallel film reactors. , 2012, Combinatorial chemistry & high throughput screening.

[33]  Christian Bährle,et al.  Aliphatic long-chain C20 polyesters from olefin metathesis. , 2011, Macromolecular rapid communications.

[34]  A. Gandini,et al.  The furan counterpart of poly(ethylene terephthalate): An alternative material based on renewable resources , 2009 .

[35]  A. Gandini,et al.  Synthesis and characterization of novel biopolyesters from suberin and model comonomers. , 2008, ChemSusChem.

[36]  S. Mecking,et al.  Nature or petrochemistry?-biologically degradable materials. , 2004, Angewandte Chemie.

[37]  L. Sartore,et al.  Thermal degradation of two classes of block copolymers based on poly(lactic-glycolic acid) and poly(e-caprolactone) or poly(ethylene glycol) , 2002 .

[38]  Jan Feijen,et al.  Poly(ethylene oxide)/poly(butylene terephthalate) segmented block copolymers: the effect of copolymer composition on physical properties and degradation behavior , 2001 .

[39]  S. Han,et al.  Thermal/oxidative degradation and stabilization of polyethylene glycol , 1997 .

[40]  Jacqueline I. Kroschwitz,et al.  Encyclopedia of Polymer Science and Technology , 1970 .