A review on vibration analysis and control of machine tool feed drive systems

With the development of the modern manufacturing industry, especially that of high-speed and high-precision machining, higher performances of computer numerical control (CNC) machine tools are necessary than ever. For high-precision CNC machine tools, vibration in high-speed machining is an important factor to affect the machining accuracy. As a significant part of CNC machine tools, the dynamic characteristics of the feed drive system have a great impact on the machining performance. Ball screw drive systems are widely applied in the majority of CNC machine tools for the time being. In the process of high-speed machining, the vibration of the ball-screw drive system will affect the stability of the control system and the machining accuracy of CNC machine tools. Thus, further investigation of dynamic characteristics and vibration control methods of the ball-screw drive system will be of great importance to improve the machining performance. A comprehensive review is carried out here to research statuses of vibration analysis and control methods for feed drive systems. Related studies on system modeling, parameter identification, and vibration control technologies are classified and summarized. The advantages and disadvantages of different methods are discussed and compared. Moreover, the linear parameter-varying (LPV) modeling method of ball-screw drive systems and corresponding control technologies are introduced in detail. Finally, related research prospects are systematically presented based on the existing studies, and these research directions which are rarely studied will be of great significance to develop vibration control technologies for CNC machine tool feed drive systems.

[1]  Okko H. Bosgra,et al.  Multivariable feedback control design for high-precision wafer stage motion , 2002 .

[2]  Jiri Tlusty,et al.  Effect of low-friction guideways and lead-screw flexibility on dynamics of high-speed machines , 1995 .

[3]  Crinela Pislaru,et al.  Hybrid modelling and simulation of a computer numerical control machine tool feed drive , 2004 .

[4]  Chinedum E. Okwudire,et al.  Improved Screw–Nut Interface Model for High-Performance Ball Screw Drives , 2011 .

[5]  Kaan Erkorkmaz,et al.  Control of ball screw drives based on disturbance response optimization , 2013 .

[6]  Guido De Roeck,et al.  Reference-based combined deterministic–stochastic subspace identification for experimental and operational modal analysis , 2006 .

[7]  Jan Swevers,et al.  Computer-aided integrated design for machines with varying dynamics , 2009 .

[8]  J.-S. Tsai,et al.  The identification of dynamic characteristics of a single bolt joint , 1988 .

[9]  Rogelio L. Hecker,et al.  Modeling and vibration mode analysis of a ball screw drive , 2012 .

[10]  Jan Swevers,et al.  Gain-scheduling control of machine tools with varying structural flexibility , 2004 .

[11]  Bassam Bamieh,et al.  Identification of linear parameter varying models , 2002 .

[12]  Andreas Knoblach,et al.  LPV gray box identification of industrial robots for control , 2012, 2012 IEEE International Conference on Control Applications.

[13]  Guido De Roeck,et al.  REFERENCE-BASED STOCHASTIC SUBSPACE IDENTIFICATION FOR OUTPUT-ONLY MODAL ANALYSIS , 1999 .

[14]  Yusuf Altintas,et al.  Contour error control of CNC machine tools with vibration avoidance , 2012 .

[15]  W. L. Li.  A NEW METHOD FOR STRUCTURAL MODEL UPDATING AND JOINT STIFFNESS IDENTIFICATION , 2002 .

[16]  Chinedum E. Okwudire.  Finite element modeling of ballscrew feed drive systems for control purposes , 2005 .

[17]  Chen Yu,et al.  Identification and compensation of friction for a novel two-axis differential micro-feed system , 2018, Mechanical Systems and Signal Processing.

[18]  Robert I. King,et al.  Handbook of High-Speed Machining Technology , 1986 .

[19]  Chinedum E. Okwudire.  Modeling and control of high speed machine tool feed drives , 2009 .

[20]  A. Galip Ulsoy,et al.  An Approach to Control Input Shaping With Application to Coordinate Measuring Machines , 1999 .

[21]  Xiaolei Huang,et al.  A new method of virtual material hypothesis-based dynamic modeling on fixed joint interface in machine tools , 2011 .

[22]  Liang Dong,et al.  HYBRID MODELING AND ANALYSIS OF STRUCTURAL DYNAMIC OF A BALL SCREW FEED DRIVE SYSTEM , 2013 .

[23]  R. L. Hecker,et al.  Servocontrol of machine-tools: a review , 2008 .

[24]  Kripa K. Varanasi,et al.  The Dynamics of Lead-Screw Drives: Low-Order Modeling and , 2004 .

[25]  M. Taylan Das,et al.  Robotics and servo press control applications: Experimental implementations , 2016, 2016 International Conference on Control, Decision and Information Technologies (CoDIT).

[26]  M. F. Zaeh,et al.  Finite Element Modelling of Ball Screw Feed Drive Systems , 2004 .

[27]  Y. M. Huang,et al.  Predicting dynamic behaviours of a whole machine tool structure based on computer-aided engineering , 2003 .

[28]  Simon Fletcher,et al.  Modelling the dynamic behaviour of a ballscrewsystem taking into account the changing position of theballscrew nut , 2003 .

[29]  Joseph Lardies,et al.  Identification of weak nonlinearities on damping and stiffness by the continuous wavelet transform , 2006 .

[30]  Alexander Yuen,et al.  An analytical local corner smoothing algorithm for five-axis CNC machining , 2017 .

[31]  P. Sas,et al.  The influence of the lubricant film on the stiffness and damping characteristics of a deep groove ball bearing , 2014 .

[32]  Yongjiang Chen,et al.  Dynamic contact stiffness analysis of a double-nut ball screw based on a quasi-static method , 2014 .

[33]  David Alan Smith,et al.  Wide bandwidth control of high-speed milling machine feed drives , 1999 .

[34]  Francisco J. Campa,et al.  Mechatronics of a ball screw drive using an N degrees of freedom dynamic model , 2017 .

[35]  Kaan Erkorkmaz,et al.  Accurate control of ball screw drives using pole-placement vibration damping and a novel trajectory prefilter , 2013 .

[36]  Hamid Ahmadian,et al.  Identification of bolted lap joints parameters in assembled structures , 2007 .

[37]  H. Boucherit,et al.  An experimental testing of a simplified model of a ball bearing: stiffness calculation and defect simulation , 2012 .

[38]  Recep Halicioglu,et al.  Mechanisms, classifications, and applications of servo presses: A review with comparisons , 2016 .

[39]  Wisama Khalil,et al.  Modeling, control and simulation of high speed machine tool axes , 1999, 1999 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (Cat. No.99TH8399).

[40]  Jun Zhang,et al.  Research on the dynamics of ball screw feed system with high acceleration , 2016 .

[41]  Benedetto Allotta,et al.  Constraints identification for vibration control of time-varying boundary conditions systems , 2001, 2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Proceedings (Cat. No.01TH8556).

[42]  Jeff S. Shamma,et al.  Analysis and design of gain scheduled control systems , 1988 .

[43]  Fuxin Du,et al.  Modeling, identification and analysis of a novel two-axis differential micro-feed system , 2017 .

[44]  Wim Desmet,et al.  Design of Mechatronic Systems With Configuration-Dependent Dynamics: Simulation and Optimization , 2008 .

[45]  Dong Lian,et al.  Hybrid modeling and time-varying analysis of vibration for a ball screw drive , 2013 .

[46]  Victor Songmene,et al.  Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis , 2009 .

[47]  Rajendra Singh,et al.  Vibration transmission through rolling element bearings, part I: Bearing stiffness formulation , 1990 .

[48]  Otto J. M. Smith,et al.  Feedback control systems , 1958 .

[49]  J. Tlusty,et al.  Active Damping of Structural Modes in High-Speed Machine Tools , 1997 .

[50]  Chorng-Shyan Lin,et al.  Identifying the Stiffness and Damping Parameters of a Linear Servomechanism , 2004 .

[51]  E. Parloo,et al.  Frequency-domain generalized total least-squares identification for modal analysis , 2004 .

[52]  Gianluca Buffa,et al.  Vibration Control of a High-Speed Precision Servo Numerically Controlled Punching Press: Multidomain Simulation and Experiments , 2017 .

[53]  Jong-Yeob Shin,et al.  BLENDING APPROACH OF LINEAR PARAMETER VARYING CONTROL SYNTHESIS FOR F-16 AIRCRAFT * , 2001 .

[54]  Miha Boltežar,et al.  Identification of the dynamic properties of joints using frequency response functions , 2008 .

[55]  Ryozo Nagamune,et al.  Switching linear parameter‐varying control with improved local performance and optimized switching surfaces , 2018 .

[56]  Kaan Erkorkmaz,et al.  Compensation of Axial Vibrations in Ball Screw Drives , 2007 .

[57]  Seyed Mahdi Hashemi,et al.  Black-box versus grey-box LPV identification to control a mechanical system , 2012, 2012 IEEE 51st IEEE Conference on Decision and Control (CDC).

[58]  Bing Li,et al.  Vibration suppression of a 3-PRR flexible parallel manipulator using input shaping , 2009, 2009 International Conference on Mechatronics and Automation.

[59]  Guo-Hua Feng,et al.  Investigation of ball screw preload variation based on dynamic modeling of a preload adjustable feed-drive system and spectrum analysis of ball-nuts sensed vibration signals , 2012 .

[60]  Paul Sas,et al.  Towards a mechatronic compiler , 2001 .

[61]  Kozo Osakada,et al.  Reduction of Blanking Noise by Controlling Press Motion , 2003 .

[62]  Recep Halicioglu,et al.  An automation system for data processing and motion generation , 2017, 2017 International Artificial Intelligence and Data Processing Symposium (IDAP).

[63]  Jan Swevers,et al.  Interpolation-Based Modeling of MIMO LPV Systems , 2011, IEEE Transactions on Control Systems Technology.

[64]  R. Whalley,et al.  Machine Tool Axis Dynamics , 2006 .

[65]  Guofu Yin,et al.  Dynamic characteristics optimization for a whole vertical machining center based on the configuration of joint stiffness , 2015 .

[66]  Masayoshi Tomizuka,et al.  Feedforward Tracking Controller Design Based on the Identification of Low Frequency Dynamics , 1993 .

[67]  Sung-Chong Chung,et al.  Integrated design methodology of ball-screw driven servomechanisms with discrete controllers. Part I: Modelling and performance analysis , 2006 .

[68]  Wim Desmet,et al.  Integrated structure and control design for mechatronic systems with configuration-dependent dynamics , 2009 .

[69]  Christian Brecher,et al.  Identification method for damping parameters of roller linear guides , 2012, Prod. Eng..

[70]  Meng-Shiun Tsai,et al.  Integration of an Empirical Mode Decomposition Algorithm With Iterative Learning Control for High-Precision Machining , 2013, IEEE/ASME Transactions on Mechatronics.

[71]  Jenq-Shyong Chen,et al.  Mechanical model and contouring analysis of high-speed ball-screw drive systems with compliance effect , 2004 .

[72]  Huajie Hong,et al.  Robust tracking control for micro machine tools with load uncertainties , 2012 .

[73]  T. A. Harris,et al.  Rolling Bearing Analysis , 1967 .

[74]  Bart Paijmans.  Interpolating gain-scheduling control for mechatronic systems with parameter-dependent dynamics , 2007 .

[75]  Manfred Weck,et al.  Dynamisches Verhalten spanender Werkzeugmaschinen : Einflußgrößen, Beurteilungsverfahren, Meßtechnik. Mit 141 Abbildungen. , 1977 .

[76]  Pierre Apkarian,et al.  Advanced gain-scheduling techniques for uncertain systems , 1998, IEEE Trans. Control. Syst. Technol..

[77]  Thomas J. Royston,et al.  VIBRATION TRANSMISSION THROUGH SELF-ALIGNING (SPHERICAL) ROLLING ELEMENT BEARINGS: THEORY AND EXPERIMENT , 1998 .

[78]  Eiji Shamoto,et al.  High speed cornering strategy with confined contour error and vibration suppression for CNC machine tools , 2015 .

[79]  Ken-ichiro Mori,et al.  Springback behaviour in bending of ultra-high-strength steel sheets using CNC servo press , 2007 .

[80]  Stephen Yurkovich,et al.  Vibration control of a two-link flexible robot arm , 1993 .

[81]  Christian Brecher,et al.  Machine tool feed drives , 2011 .

[82]  Recep Halicioglu,et al.  Improvement of metal forming quality by motion design , 2018, Robotics and Computer-Integrated Manufacturing.

[83]  Jan Swevers,et al.  Identification of Interpolating Affine LPV Models for Mechatronic Systems with one Varying Parameter , 2008, Eur. J. Control.

[84]  Amin Kamalzadeh,et al.  Precision Control of High Speed Ball Screw Drives , 2009 .

[85]  G. Balas,et al.  Development of linear-parameter-varying models for aircraft , 2004 .

[86]  Jong-Yeob Shin,et al.  Quasi-Linear Parameter Varying Representation over Non-trim Region , 2004 .

[87]  Ryozo Nagamune,et al.  Switching Gain-Scheduled Control Design for Flexible Ball-Screw Drives , 2014 .

[88]  Ryozo Nagamune,et al.  Tracking and Structural Vibration Control of Flexible Ball–Screw Drives With Dynamic Variations , 2015, IEEE/ASME Transactions on Mechatronics.

[89]  Chinedum E. Okwudire,et al.  Minimum Tracking Error Control of Flexible Ball Screw Drives Using a Discrete-Time Sliding Mode Controller , 2009 .

[90]  Didier Dumur,et al.  Direct Adaptive Generalized Predictive Control. Application to Motor Drives with Flexible Modes , 2000 .

[91]  Yusuf Altintas,et al.  Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design , 2000 .

[92]  Emmanuel Foltête,et al.  Experimental identification of nonlinear dynamic properties of built-up structures , 2009 .

[93]  Ryozo Nagamune,et al.  Tracking Control of Flexible Ball Screw Drives With Runout Effect and Mass Variation , 2012, IEEE Transactions on Industrial Electronics.

[94]  Bin Yao,et al.  This article has been accepted for publication in a future issue of this journal, but has not been fully edited. Content may change prior to final publication. Coordinated Adaptive Robust Contouring Control of an Industrial Biaxial Precision Gantry with C , 2022 .

[95]  Rong-Jong Wai,et al.  Real-Time PID Control Strategy for Maglev Transportation System via Particle Swarm Optimization , 2011, IEEE Transactions on Industrial Electronics.

[96]  Ryozo Nagamune,et al.  Discrete-Time State-Feedback Switching LPV Control with Separate Lyapunov Functions for Stability and Local Performance , 2018, 2018 Annual American Control Conference (ACC).

[97]  G. Pritschow,et al.  Research on the Efficiency of Feedforward Controllers in M Direct Drives , 1992 .

[98]  P. Verboven,et al.  Improved total least squares estimators for modal analysis , 2005 .

[99]  Dong Liu.  Frequency Response Identification for Ballscrew Servo Driven System Based on Symlets Wavelet , 2011 .

[100]  Yongjiang Chen,et al.  Nonlinear Dynamics Behaviors of Ball Screws with Preload Considered , 2012 .

[101]  Manfred Weck,et al.  Sharp Corner Tracking Using the IKF Control Strategy , 1990 .

[102]  Ryozo Nagamune,et al.  Smooth switching LPV controller design for LPV systems , 2014, Autom..

[103]  Jae Wook Jeon,et al.  An FPGA-Based Multiple-Axis Motion Control Chip , 2009, IEEE Trans. Ind. Electron..

[104]  Günter Pritschow,et al.  A Comparison of Linear and Conventional Electromechanical Dives , 1998 .

[105]  Yi Liu,et al.  Hilbert-Huang Transform and the Application , 2020, 2020 IEEE International Conference on Artificial Intelligence and Information Systems (ICAIIS).

[106]  Warren P. Seering,et al.  Using input command pre-shaping to suppress multiple mode vibration , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[107]  Yusuf Altintas,et al.  Local toolpath smoothing for five-axis machine tools , 2015 .

[108]  K. W. Wang,et al.  Integrated approach toward the dynamic analysis of high-speed spindles: Part I - system model , 1993 .

[109]  Ke Zhang,et al.  Smooth trajectory generation for five-axis machine tools , 2013 .

[110]  Yusuf Altintas,et al.  Sliding Mode Controller Design for High Speed Feed Drives , 2000 .

[111]  Chinedum E. Okwudire,et al.  Hybrid Modeling of Ball Screw Drives With Coupled Axial, Torsional, and Lateral Dynamics , 2009 .

[112]  A. Galip Ulsoy,et al.  Experimental Identification of the Nonlinear Parameters of an Industrial Translational Guide for Machine Performance Evaluation , 2008 .

[113]  Guangpeng Zhang,et al.  ANALYSYS METHOD OF DYNAMIC BEHAVIORS OF GUIDWAY JOINT AND ITS APPICATION IN MACHINE TOOLS DESIGN , 2002 .

[114]  Herbert Schulz,et al.  High-Speed Machining , 1992 .

[115]  Shengdun Zhao,et al.  Hybrid-loop servo control system of double toggle mechanical press for flexible forming process based on sliding mode control and neural network techniques , 2016, J. Syst. Control. Eng..

[116]  Kaan Erkorkmaz,et al.  High Bandwidth Control of Ball Screw Drives , 2006 .

[117]  H. Akaike.  A new look at the statistical model identification , 1974 .