Investigation into the applicability of a passive upper-limb exoskeleton in automotive industry

The fourth industrial revolution faces the technological challenge of human-robot cooperation in manufacturing process. Aim of this study was to investigate the effectiveness and user's acceptance of a passive exoskeleton for upper limbs. Three different tests, involving static and dynamic tasks, were performed by 29 automotive operators without and with the exoskeleton. Main aspects and results of the testing campaign are presented in the paper. Potential issues associated to the introduction of these auxiliary devices in the automotive industry are briefly addressed, together with the open questions on how to assess the biomechanical workload risk, especially in the design phase.

[1]  Andrew G. Glen,et al.  APPL , 2001 .

[2]  E. Heath.  Borg's Perceived Exertion and Pain Scales , 1998 .

[3]  Arthur Spaepen,et al.  Influence of material handling devices on the physical load during the end assembly of cars , 1999 .

[4]  Joan M Stevenson,et al.  Mathematical and empirical proof of principle for an on-body personal lift augmentation device (PLAD). , 2007, Journal of biomechanics.

[5]  Joy C MacDermid,et al.  Validation of a new test that assesses functional performance of the upper extremity and neck (FIT-HaNSA) in patients with shoulder pathology , 2007, BMC musculoskeletal disorders.

[6]  Fadi A Fathallah,et al.  Subject-specific, whole-body models of the stooped posture with a personal weight transfer device. , 2013, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[7]  Fred D. Davis,et al.  A Theoretical Extension of the Technology Acceptance Model: Four Longitudinal Field Studies , 2000, Management Science.

[8]  Michael J Agnew,et al.  An on-body personal lift augmentation device (PLAD) reduces EMG amplitude of erector spinae during lifting tasks. , 2006, Clinical biomechanics.

[9]  Joan M. Stevenson,et al.  Effect of an on-body ergonomic aid on oxygen consumption during a repetitive lifting task , 2014 .

[10]  Yijian Zhang,et al.  A Review of exoskeleton-type systems and their key technologies , 2008 .

[11]  Khairul Anam,et al.  Active Exoskeleton Control Systems: State of the Art , 2012 .

[12]  E. Rocon,et al.  Design and Validation of a Rehabilitation Robotic Exoskeleton for Tremor Assessment and Suppression , 2007, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[13]  Michael J Agnew,et al.  Effectiveness of an on-body lifting aid at reducing low back physical demands during an automotive assembly task: assessment of EMG response and user acceptability. , 2009, Applied ergonomics.

[14]  Sheng Quan Xie,et al.  Exoskeleton robots for upper-limb rehabilitation: state of the art and future prospects. , 2012, Medical engineering & physics.

[15]  H. Kazerooni,et al.  Biomechanical design of the Berkeley lower extremity exoskeleton (BLEEX) , 2006, IEEE/ASME Transactions on Mechatronics.

[16]  Jacob Rosen,et al.  A myosignal-based powered exoskeleton system , 2001, IEEE Trans. Syst. Man Cybern. Part A.

[17]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[18]  M. de Looze,et al.  The effects of a passive exoskeleton on muscle activity, discomfort and endurance time in forward bending work. , 2016, Applied ergonomics.

[19]  Michael J Agnew,et al.  The effect of an on-body personal lift assist device (PLAD) on fatigue during a repetitive lifting task. , 2009, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.