Pool boiling critical heat flux (CHF) – Part 2: Assessment of models and correlations

[1]  N. Zuber.  On the Stability of Boiling Heat Transfer , 1958, Journal of Fluids Engineering.

[2]  N. Zuber.  Hydrodynamic aspects of boiling heat transfer (thesis) , 1959 .

[3]  H. Merte,et al.  Pool Boiling in an Accelerating System , 1961 .

[4]  N. Zuber.  The Hydrodynamic Crisis in Pool Boiling of Saturated and Subcooled Liquids , 1963 .

[5]  D. N. Lyon,et al.  Nucleate Boiling Heat Transfer Coefficients and Peak Nucleate Boiling Fluxes for Pure Liquid Nitrogen and Oxygen on Horizontal Platinum Surfaces from Below 0.5 Atmosphere to the Critical Pressures , 1964 .

[6]  D. N. Lyon.  Peak nucleate-boiling heat fluxes and nucleate-boiling heat-transfer coefficients for liquid N2, liquid O2 and their mixtures in pool boiling at atmospheric pressure , 1964 .

[7]  H. Merte,et al.  Boiling Heat Transfer With Cryogenic Fluids at Standard, Fractional, and Near-Zero Gravity , 1964 .

[8]  Y. Kirichenko,et al.  Determination of the first critical thermal flux on flat heaters , 1971 .

[9]  Y. Katto,et al.  Mechanism of Boiling Crisis and Transition Boiling in Pool Boiling , 1971 .

[10]  M. Jergel,et al.  Static heat transfer to liquid helium in open pools and narrow channels , 1971 .

[11]  J. Lienhard,et al.  Extended hydrodynamic theory of the peak and minimum pool boiling heat fluxes , 1973 .

[12]  I. P. Vishnev.  Effect of orienting the hot surface with respect to the gravitational field on the critical nucleate boiling of a liquid , 1973 .

[13]  J. Lienhard,et al.  Hydrodynamic Prediction of Peak Pool-boiling Heat Fluxes from Finite Bodies , 1973 .

[14]  L. Bewilogua,et al.  Heat transfer in cryogenic liquids under pressure , 1975 .

[15]  V. Keilin,et al.  Nucleate and film pool boiling heat transfer to saturated liquid helium , 1977 .

[16]  I. I. Gogonin,et al.  Critical heat flux as a function of heater size for a liquid boiling in a large enclosure , 1977 .

[17]  D. A. Labuntsov,et al.  CRITICAL HEAT FLUXES IN BOILING AT LOW PRESSURE REGION , 1978 .

[18]  M. Monde,et al.  Critical Heat Flux During Natural Convective Boiling in Vertical Rectangular Channels Submerged in Saturated Liquid , 1982 .

[19]  Y. Katto,et al.  A new hydrodynamic model of critical heat flux, applicable widely to both pool and forced convection boiling on submerged bodies in saturated liquids , 1983 .

[20]  S. Liaw,et al.  EFFECT OF SURFACE WETTABILITY ON TRANSITION BOILING HEAT TRANSFER FROM A VERTICAL SURFACE , 1986 .

[21]  R. Scurlock,et al.  Angular Dependence of Boiling Heat Transfer Mechanisms in Liquid Nitrogen , 1988 .

[22]  M. Maracy,et al.  Hysteresis and contact angle effects in transition pool boiling of water , 1988 .

[23]  I. Mudawar,et al.  Single- and Two-Phase Convective Heat Transfer From Smooth and Enhanced Microelectronic Heat Sources in a Rectangular Channel , 1989 .

[24]  S. Nishio,et al.  Steady-State Pool Boiling Heat Transfer to Saturated Liquid Helium at Atmospheric Pressure , 1989 .

[25]  D. C. Wadsworth,et al.  Enhancement of Single-Phase Heat Transfer and Critical Heat Flux From an Ultra-High-Flux Simulated Microelectronic Heat Source to a Rectangular Impinging Jet of Dielectric Liquid , 1992 .

[26]  M. El-Genk,et al.  An experimental study of saturated pool boiling from downward facing and inclined surfaces , 1992 .

[27]  I. Mudawar,et al.  Forced-convection boiling and critical heat flux from a linear array of discrete heat sources , 1992 .

[28]  V. Dhir,et al.  Effect of Surface Wettability on Active Nucleation Site Density During Pool Boiling of Water on a Ve , 1993 .

[29]  I. Mudawar,et al.  Optimization of Enhanced Surfaces for High Flux Chip Cooling by Pool Boiling , 1993 .

[30]  Matthew J. Brusstar,et al.  Effects of buoyancy on the critical heat flux in forced convection , 1994 .

[31]  S. M. You,et al.  Heater Orientation Effects on Pool Boiling of Micro-Porous-Enhanced Surfaces in Saturated FC-72 , 1996 .

[32]  I. Mudawar,et al.  Effects of heater length and orientation on the trigger mechanism for near-saturated flow boiling critical heat flux. I: Photographic study and statistical characterization of the near-wall interfacial features , 1995 .

[33]  Issam Mudawar,et al.  An Ultra-High Power Two-Phase Jet-Impingement Avionic Clamshell Module , 1996 .

[34]  Matthew J. Brusstar,et al.  Effects of heater surface orientation on the critical heat flux—I. An experimental evaluation of models for subcooled pool boiling , 1997 .

[35]  Matthew J. Brusstar,et al.  Effects of heater surface orientation on the critical heat flux—II. A model for pool and forced convection subcooled boiling , 1997 .

[36]  Soon-Heung Chang,et al.  Pool-boiling critical heat flux of water on small plates: Effects of surface orientation and size , 1997 .

[37]  I. Mudawar,et al.  Enhancement of boiling heat transfer using highly wetting liquids with pressed-on fins at low contact forces , 1997 .

[38]  A. Howard,et al.  An analytical model for near-saturated pool boiling critical heat flux on vertical surfaces , 1997 .

[39]  A. Bergles,et al.  Effects of heater-side factors on the saturated pool boiling critical heat flux , 1997 .

[40]  I. Mudawar,et al.  Ultra-high critical heat flux (CHF) for subcooled water flow boiling—II: high-CHF database and design equations , 1999 .

[41]  I. Mudawar,et al.  Orientation effects on pool boiling critical heat flux (CHF) and modeling of CHF for near-vertical surfaces , 1999 .

[42]  I. Mudawar,et al.  Thermal transients in a capillary evaporator prior to the initiation of boiling , 2000 .

[43]  S. M. You,et al.  EFFECTS OF HEATER SIZE AND ORIENTATION ON POOL BOILING HEAT TRANSFER FROM MICROPOROUS COATED SURFACES , 2001 .

[44]  Issam Mudawar.  Assessment of high-heat-flux thermal management schemes , 2001 .

[45]  S. Kandlikar.  A Theoretical model to predict pool boiling CHF incorporating effects of contact angle and orientation , 2001 .

[46]  T. Theofanous,et al.  The Boiling Crisis Phenomenon - Part 2 : Dryout Dynamics and Burnout , 2002 .

[47]  I. Mudawar,et al.  Experimental assessment of the effects of body force, surface tension force, and inertia on flow boiling CHF , 2002 .

[48]  J. A. Shmerlert.  Local heat transfer coefficient in wavy free-falling turbulent liquid films undergoing uniform sensible heating , 2002 .

[49]  I. Mudawar,et al.  TED-AJ03-538 A LEIDENFROST POINT MODEL FOR IMPINGING DROPLETS AND SPRAYS , 2004 .

[50]  M. El-Genk.  COMBINED EFFECTS OF SUBCOOLING AND SURFACE ORIENTATION ON POOL BOILING OF HFE-7100 FROM A SIMULATED ELECTRONIC CHIP , 2003 .

[51]  M. El-Genk,et al.  Saturation boiling of HFE-7100 from a copper surface, simulating a microelectronic chip , 2003 .

[52]  I. Mudawar,et al.  Smart pumpless loop for micro-channel electronic cooling using flat and enhanced surfaces , 2003 .

[53]  I. Mudawar,et al.  Flow boiling CHF in microgravity , 2005 .

[54]  A. Priarone.  Effect of surface orientation on nucleate boiling and critical heat flux of dielectric fluids , 2005 .

[55]  S. B. Kim,et al.  Visualization of boiling phenomena in inclined rectangular gap , 2005 .

[56]  C. Beduz,et al.  Pool boiling study on candidature of pentane, methanol and water for near room temperature cooling , 2006, Thermal and Thermomechanical Proceedings 10th Intersociety Conference on Phenomena in Electronics Systems, 2006. ITHERM 2006..

[57]  I. Mudawar,et al.  Experimental and numerical investigation of single-phase heat transfer using a hybrid jet-impingement/micro-channel cooling scheme , 2006 .

[58]  T. Theofanous,et al.  High heat flux boiling and burnout as microphysical phenomena : Mounting evidence and opportunities , 2006 .

[59]  S. Kim,et al.  Surface wettability change during pool boiling of nanofluids and its effect on critical heat flux , 2007 .

[60]  I. Mudawar,et al.  Two-phase spray cooling of hybrid vehicle electronics , 2008, 2008 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

[61]  I. Mudawar,et al.  Effects of high subcooling on two-phase spray cooling and critical heat flux , 2008 .

[62]  I. Mudawar,et al.  Fluid flow and heat transfer characteristics of low temperature two-phase micro-channel heat sinks – Part 1: Experimental methods and flow visualization results , 2008 .

[63]  Zhen-hua Liu,et al.  Compositive effects of orientation and contact angle on critical heat flux in pool boiling of water , 2008 .

[64]  I. Mudawar,et al.  Critical heat flux for subcooled flow boiling in microchannel heat sinks , 2009 .

[65]  A. Ono,et al.  Critical Heat Flux and Near-Wall Boiling Behaviors in Saturated and Subcooled Pool Boiling on Vertical and Inclined Surfaces , 2009 .

[66]  I. Mudawar,et al.  Critical heat flux for subcooled flow boiling in micro-channel heat sinks , 2009 .

[67]  A. Ono,et al.  Boiling behaviors and critical heat flux on a horizontal plate in saturated pool boiling of water at high pressures , 2009 .

[68]  A. Majumdar,et al.  Nanowires for enhanced boiling heat transfer. , 2009, Nano letters.

[69]  M. Kim,et al.  Pool boiling CHF enhancement by micro/nanoscale modification of zircaloy-4 surface , 2010 .

[70]  S. M. You,et al.  Nanocoating characterization in pool boiling heat transfer of pure water , 2010 .

[71]  S. M. You,et al.  Effects of pressure, orientation, and heater size on pool boiling of water with nanocoated heaters , 2010 .

[72]  R. Mei,et al.  A new mechanistic model for pool boiling CHF on horizontal surfaces , 2011 .

[73]  M. Kim,et al.  Effect of liquid spreading due to nano/microstructures on the critical heat flux during pool boiling , 2011 .

[74]  M. Pilson.  Effects of pressure , 2012 .

[75]  A. Alemrajabi,et al.  Experimental investigation of pool boiling heat transfer and critical heat flux of nanostructured surfaces , 2013 .

[76]  M. Rubner,et al.  Separate effects of surface roughness, wettability, and porosity on the boiling critical heat flux , 2013 .

[77]  Issam Mudawar,et al.  Recent Advances in High-Flux, Two-Phase Thermal Management , 2013 .

[78]  Issam Mudawar.  Recent Advances in High-Flux, Two-Phase Thermal Management , 2013 .

[79]  R. Mei,et al.  Comparison of CHF Enhancement on Microstructured Surfaces With a Predictive Model , 2014 .

[80]  V. Yagov,et al.  Is a crisis in pool boiling actually a hydrodynamic phenomenon , 2014 .

[81]  Zhixin Li,et al.  Critical heat flux for downward-facing saturated pool boiling on pin fin surfaces , 2015 .

[82]  I. Mudawar,et al.  Review of flow boiling and critical heat flux in microgravity , 2015 .

[83]  S. Jun,et al.  Effect of surface roughness on pool boiling heat transfer at a heated surface having moderate wettability , 2016 .

[84]  Fushou Xie,et al.  Correlations for calculating heat transfer of hydrogen pool boiling , 2016 .

[85]  H. Sakashita.  Critical Heat Flux on a Vertical Surface in Saturated Pool Boiling at High Pressures , 2016 .

[86]  Ji Min Kim,et al.  Boiling characteristics on a serpentine-like geometry thin-film platinum heater under pool boiling , 2016 .

[87]  S. Jun,et al.  Effect of Surface Roughness on Pool Boiling Heat Transfer of Water on a Superhydrophilic Aluminum Surface , 2017 .

[88]  I. Mudawar,et al.  Pool boiling critical heat flux (CHF) – Part 1: Review of mechanisms, models, and correlations , 2018 .