Early-stage analysis of a novel insulation material based on MPCM-doped cementitious foam: Modelling of properties, identification of production process hotspots and exploration of performance trade-offs

[1]  A. Aslani,et al.  Energy simulation and life cycle assessment of a 3D printable building , 2023, Cleaner Materials.

[2]  Z. Arabshahi,et al.  Unified modeling and experimental realization of electrical and thermal percolation in polymer composites , 2022, Applied Physics Reviews.

[3]  H. Röder,et al.  Life Cylce Assessment (LCA) of Thermal Insulation Materials: A Critical Review , 2022, Cleaner Materials.

[4]  A. Yehya,et al.  Review on the sustainability of phase-change materials used in buildings , 2022, Energy Conversion and Management: X.

[5]  Surendra P. Shah,et al.  Design, characteristic and application of phase change materials for sustainable and energy efficient buildings: A review , 2022, Energy and Buildings.

[6]  M. Mohammadi,et al.  Fabrication and Thermal properties of graphene nanoplatelet-enhanced phase change materials based on paraffin encapsulated by melamine–formaldehyde , 2021, Journal of Thermal Analysis and Calorimetry.

[7]  M. Rotilio,et al.  Economic and environmental assessment of thermal insulation. A case study in the Italian context , 2021, Case Studies in Construction Materials.

[8]  Shreshth Nagpal,et al.  Building envelope modeling calibration using aerial thermography , 2020 .

[9]  R. Parameshwaran,et al.  Facile synthesis of microencapsulated 1-dodecanol/melamine-formaldehyde phase change material using in-situ polymerization for thermal energy storage , 2020 .

[10]  A. Samui,et al.  Melamine-formaldehyde microencapsulated n-Tetracosane phase change material for solar thermal energy storage in coating , 2020 .

[11]  T. McAloone,et al.  DEVELOPING A TOOL TO SUPPORT DECISIONS IN SUSTAINABILITY-RELATED TRADE-OFF SITUATIONS: UNDERSTANDING NEEDS AND CRITERIA , 2020, Proceedings of the Design Society: DESIGN Conference.

[12]  L. C. Felius,et al.  Retrofitting towards energy-efficient homes in European cold climates: a review , 2020 .

[13]  Michael Carbajales-Dale,et al.  Life cycle assessment of emerging technologies: A review , 2019, Journal of Industrial Ecology.

[14]  Pushpendra Kumar Singh Rathore,et al.  Potential of macroencapsulated PCM for thermal energy storage in buildings: A comprehensive review , 2019, Construction and Building Materials.

[15]  A. Kjøniksen,et al.  Thermal analysis of multi-layer walls containing geopolymer concrete and phase change materials for building applications , 2019, Energy.

[16]  Mohammad K. Najjar,et al.  A framework to estimate heat energy loss in building operation , 2019, Journal of Cleaner Production.

[17]  Abdel-Hamid I. Mourad,et al.  Traditional, state-of-the-art and renewable thermal building insulation materials: An overview , 2019, Construction and Building Materials.

[18]  M. Frigione,et al.  Phase Change Materials for Energy Efficiency in Buildings and Their Use in Mortars , 2019, Materials.

[19]  I. Santacruz,et al.  Effect of microencapsulated phase change materials on the flow behavior of cement composites , 2019, Construction and Building Materials.

[20]  R. Lake,et al.  Thermal Percolation Threshold and Thermal Properties of Composites with High Loading of Graphene and Boron Nitride Fillers. , 2018, ACS applied materials & interfaces.

[21]  A. Alghamdi,et al.  Multiscale 3D finite-element modelling of the thermal conductivity of clay brick walls , 2017 .

[22]  R. Kurita,et al.  Close relationship between a dry-wet transition and a bubble rearrangement in two-dimensional foam , 2016, Scientific Reports.

[23]  Shuangfeng Wang,et al.  Enhancement on thermal properties of paraffin/calcium carbonate phase change microcapsules with carbon network , 2016 .

[24]  S. Harsha,et al.  Analysis of mechanical properties of carbon nanotube reinforced polymer composites using multi-scale finite element modeling approach , 2016 .

[25]  Mark Mulville,et al.  The impact of regulations on overheating risk in dwellings , 2016 .

[26]  Bjørn Petter Jelle,et al.  Phase Change Materials and Products for Building Applications: A State-of-the-Art Review and Future Research Opportunities , 2015 .

[27]  Andrew C. Heath,et al.  Minimising the global warming potential of clay based geopolymers , 2014 .

[28]  Beatriz Rodríguez-Soria,et al.  Review of international regulations governing the thermal insulation requirements of residential buildings and the harmonization of envelope energy loss , 2014 .

[29]  Maryam Ghasemi,et al.  Optimization of parameters in preparation of PCM microcapsules based on melamine formaldehyde through dispersion polymerization , 2014, Colloid and Polymer Science.

[30]  Alan Shu Khen Kwan,et al.  An investigation into future performance and overheating risks in Passivhaus dwellings , 2013 .

[31]  A. Ortona,et al.  Evaluation of a simple finite element method for the calculation of effective electrical conductivity of compression moulded polymer–graphite composites , 2013 .

[32]  Dongmei Pan,et al.  The effects of external wall insulation thickness on annual cooling and heating energy uses under different climates , 2012 .

[33]  Anubhav Jain,et al.  From the computer to the laboratory: materials discovery and design using first-principles calculations , 2012, Journal of Materials Science.

[34]  Marco Taisch,et al.  Assessment of Sustainable Practices in New Product Development , 2011, APMS.

[35]  Henk Visscher,et al.  The effect of occupancy and building characteristics on energy use for space and water heating in Dutch residential stock , 2009 .

[36]  R. Pal.  On the Lewis-Nielsen model for thermal/electrical conductivity of composites , 2008 .

[37]  E. Onder,et al.  Encapsulation of phase change materials by complex coacervation to improve thermal performances of woven fabrics , 2008 .

[38]  J. Su,et al.  Fabrication and thermal properties of microPCMs: Used melamine‐formaldehyde resin as shell material , 2006 .

[39]  D. R. Bauer.  Melamine/formaldehyde crosslinkers: characterization, network formation and crosslink degradation , 1986 .

[40]  L. Nielsen.  The Thermal and Electrical Conductivity of Two-Phase Systems , 1974 .

[41]  Lawrence E. Nielsen,et al.  Dynamic mechanical properties of particulate‐filled composites , 1970 .

[42]  Luisa F. Cabeza,et al.  Heating and cooling energy trends and drivers in buildings , 2015 .

[43]  Dávid Bozsaky,et al.  The historical development of thermal insulation materials , 2010 .

[44]  M. Hawlader,et al.  Microencapsulated PCM thermal-energy storage system , 2003 .