Highly Sensitive and Fast-Response Volatile Organic Compounds Sensors Based on Star-Shaped BaTiO3/ZnO Heterostructures

Integrating different semiconductor materials, taking merits of each component’s advantages and synergistic properties, hold great promise to enhance the performance of gas sensors. In the present study, a multistep fabrication process, involving the environment-friendly hydrothermal process and simple sol-gel techniques is proposed for the fabrication of star-shaped BaTiO3/ZnO heterostructures based sensors. Sensors with different molar ratios of BaTiO3 to ZnO were fabricated and exploited for the detection of volatile organic compounds. Characterizations of the BaTiO3/ZnO heterostructures using X-ray diffraction spectroscopy, field emission scanning electron microscopy, and energy dispersive spectroscopy provided clear evidence of high-purity star-shaped heterostructure formation. Gas sensing measurement results illustrate that the BaTiO3/ZnO heterostructure based sensor with a molar ratio of 1:2 exhibits an abrupt and reliable gas response to ethanol and acetone at the optimum working temperature of 300 °C. Moreover, the BaTiO3/ZnO heterostructure sensor with a molar ratio of 1:3 shows a significant response to methanol at the optimum working temperature of 260 °C. The enhanced sensing characteristics of the sensor are attributed to the formation of heterojunctions at the interface of BaTiO3 and ZnO and surface area enhancement provided by its star-shaped morphology.

[1]  Fanli Meng,et al.  Nanocomposites of ZnO Nanorods In-Situ Grown on Graphitic Carbon Nitride for Ethanol Sensing , 2020, IEEE Sensors Journal.

[2]  Zhenyu Yuan,et al.  Detection and Identification of Volatile Organic Compounds Based on Temperature-Modulated ZnO Sensors , 2020, IEEE Transactions on Instrumentation and Measurement.

[3]  R. Adelung,et al.  Tuning ZnO Sensors Reactivity toward Volatile Organic Compounds via Ag Doping and Nanoparticle Functionalization , 2019, ACS applied materials & interfaces.

[4]  Sim Lan Ching,et al.  Synthesis and Characterization of TiO2 Nanotube Using Electrochemical Anodization Method , 2018, International Journal of Engineering Technology and Sciences.

[5]  R. Adelung,et al.  Al‐Doped ZnO Nanowires by Electrochemical Deposition for Selective VOC Nanosensor and Nanophotodetector , 2018 .

[6]  F. Alam,et al.  Prospects and Challenges of Volatile Organic Compound Sensors in Human Healthcare. , 2018, ACS sensors.

[7]  Matteo Ferroni,et al.  Branch-like NiO/ZnO heterostructures for VOC sensing , 2018, Sensors and Actuators B: Chemical.

[8]  Bingbing Liu,et al.  Controllable construction of Cr2O3-ZnO hierarchical heterostructures and their formaldehyde gas sensing properties , 2018, Materials Letters.

[9]  Lingzhang Zhu,et al.  Volatile organic compound sensing based on coral rock-like ZnO , 2018 .

[10]  Manorama V. Sunkara,et al.  Highly Selective CO2 Gas Sensing Properties of CaO-BaTiO3 Heterostructures Effectuated through Discretely Created n-n Nanointerfaces , 2018 .

[11]  Zhenyu Feng,et al.  In-situ generation of highly dispersed Au nanoparticles on porous ZnO nanoplates via ion exchange from hydrozincite for VOCs gas sensing , 2018 .

[12]  P. More,et al.  BaTiO 3 nanostructures for H 2 S gas sensor: Influence of band-gap, size and shape on sensing mechanism , 2017 .

[13]  Minghui Shao,et al.  Fabrication of ZnO/ZnFe2O4 hollow nanocages through metal organic frameworks route with enhanced gas sensing properties , 2017 .

[14]  Rumin Li,et al.  Enhanced acetone gas sensing response of ZnO/ZnCo2O4 nanotubes synthesized by single capillary electrospinning technology , 2017 .

[15]  G. Lu,et al.  Study on TiO2-SnO2 core-shell heterostructure nanofibers with different work function and its application in gas sensor , 2017 .

[16]  Cecilia A. Zito,et al.  ZnO nanorods/graphene oxide sheets prepared by chemical bath deposition for volatile organic compounds detection , 2017 .

[17]  Huiqing Fan,et al.  NiO/ZnO p–n heterostructures and their gas sensing properties for reduced operating temperature , 2016 .

[18]  Giovanni Neri,et al.  Detection of hazardous volatile organic compounds (VOCs) by metal oxide nanostructures-based gas sensors: A review , 2016 .

[19]  S. B. Rudraswamy,et al.  Optimization of RF Sputtered Ag-Doped BaTiO3-CuO Mixed Oxide Thin Film as Carbon Dioxide Sensor for Environmental Pollution Monitoring Application , 2016, IEEE Sensors Journal.

[20]  Mohammad Hossein Sheikhi,et al.  Fabrication of capacitive sensor based on Cu-BTC (MOF-199) nanoporous film for detection of ethanol and methanol vapors , 2016 .

[21]  Hyung‐Ho Park,et al.  Barium Titanate Nanoparticles Formed by Chlorine-Free Ambient Condition Sol Process Using Tetrabutylammonium Hydroxide , 2016 .

[22]  Xindong Zhang,et al.  Highly stabilized and rapid sensing acetone sensor based on Au nanoparticle-decorated flower-like ZnO microstructures , 2015 .

[23]  Hao Wu,et al.  Flower-like hierarchical structures consisting of porous single-crystalline ZnO nanosheets and their gas sensing properties to volatile organic compounds (VOCs) , 2015 .

[24]  H. S. Hassan,et al.  Synthesis, characterization and fabrication of gas sensor devices using ZnO and ZnO:In nanomaterials , 2014 .

[25]  L. A. Patil,et al.  Effect of firing temperature on gas sensing properties of nanocrystalline perovskite BaTiO3 thin films prepared by spray pyrolysis techniques , 2014 .

[26]  Yanli Liu,et al.  Au nanoparticle modified flower-like ZnO structures with their enhanced properties for gas sensing , 2014 .

[27]  Chiing-Chang Chen,et al.  Photocatalytic activity and mechanism of nano-cubic barium titanate prepared by a hydrothermal method , 2013 .

[28]  G. Neri,et al.  Microwave-assisted synthesis, characterization and ammonia sensing properties of polymer-capped star-shaped zinc oxide nanostructures , 2011 .

[29]  J. Hodak,et al.  Design of low cost gas sensor based on SrTiO3 and BaTiO3 films. , 2010, Journal of nanoscience and nanotechnology.

[30]  Matteo Ferroni,et al.  Reversed bias Pt/nanostructured ZnO Schottky diode with enhanced electric field for hydrogen sensing , 2010 .

[31]  Wei Zheng,et al.  Humidity sensing properties of BaTiO3 nanofiber prepared via electrospinning , 2010 .

[32]  K. Latham,et al.  Transition from n- to p- type of spray pyrolysis deposited cu doped ZnO thin films for NO2 sensing , 2009 .

[33]  Yang-Kyu Choi,et al.  Chemical sensors based on nanostructured materials , 2007 .

[34]  K. Park,et al.  Gas sensing characteristics of BaTiO3-based ceramics , 2004 .

[35]  Zilong Tang,et al.  Studies on grain-boundary chemistry of perovskite ceramics as CO gas sensors , 2003 .

[36]  Jing Wang,et al.  Humidity sensors based on composite material of nano-BaTiO3 and polymer RMX , 2002 .

[37]  Lin Chen,et al.  Electrospinning preparation of Pd@Co3O4-ZnO composite nanofibers and their highly enhanced VOC sensing properties , 2019, Materials Research Bulletin.

[38]  Yongjia Zhang,et al.  Ethanol sensing characteristics of BaTiO3/LaFeO3 nanocomposite , 2019, Materials Letters.

[39]  C. Guillard,et al.  Highly photocatalytic activity of nanocrystalline TiO2 (anatase, rutile) powders prepared from TiCl4 by sol–gel method in aqueous solutions. , 2018 .

[40]  Xin Guo,et al.  Detecting low concentration of H2S gas by BaTiO3 nanoparticle-based sensors , 2017 .

[41]  D. Meng,et al.  Preparation and gas sensing properties of undoped and Pd-doped TiO2 nanowires , 2014 .

[42]  K. Latham,et al.  Transition from nto p-Type of Spray Pyrolysis Deposited Cu Doped ZnO Thin Films for NO 2 Sensing , 2009 .