High performance cathode based on carbon fiber felt for magnesium-air fuel cells

Abstract A series of carbon fiber felt/PTFE based gas diffusion layers (GDL) for Mg-air fuel cells were prepared by a simple method of immersing carbon fiber felt in PTFE suspension. Critical properties of the as-prepared GDL, including the surface morphology, electronic resistivity, porosity and gas permeability, have been characterized to investigate the effect of PTFE suspension concentration and PTFE content on the properties of the GDL. The micrographs indicated that the PTFE was homogenously dispersed on the carbon fiber felts and showed structure with a microporous layer. The as-prepared GDL exhibited good mechanical property, high electronic conductivity, sufficient water repellency and high gas permeability. Compared with the Mg-air fuel cell with a traditional carbon powder based cathode, the performance and the stability of Mg-air fuel cell with the carbon fiber felt based GDL are improved significantly.

[1]  Chun-Chen Yang,et al.  Alkaline composite PEO–PVA–glass-fibre-mat polymer electrolyte for Zn–air battery , 2002 .

[2]  Hui Meng,et al.  Novel Pt-free catalyst for oxygen electroreduction , 2006 .

[3]  Byeong-Su Kim,et al.  Ionic liquid modified graphene nanosheets anchoring manganese oxide nanoparticles as efficient electrocatalysts for Zn–air batteries , 2011 .

[4]  Karl Kordesch,et al.  Degradation modes of alkaline fuel cells and their components , 1992 .

[5]  James M. Fenton,et al.  Characterization of Gas Diffusion Layers for PEMFC , 2004 .

[6]  Sun Tai Kim,et al.  Metal–Air Batteries with High Energy Density: Li–Air versus Zn–Air , 2010 .

[7]  Y. Chen-Yang,et al.  Novel single-layer gas diffusion layer based on PTFE/carbon black composite for proton exchange membrane fuel cell , 2007 .

[8]  Maria G. Medeiros,et al.  Optimization of the magnesium-solution phase catholyte semi-fuel cell for long duration testing , 2001 .

[9]  Øistein Hasvold,et al.  Sea-water battery for subsea control systems , 1997 .

[10]  D. Linden.  Handbook Of Batteries , 2001 .

[11]  Qin Xin,et al.  Comparison of CNF and XC-72 carbon supported palladium electrocatalysts for magnesium air fuel cell , 2007 .

[12]  Lemi Türker,et al.  Performance of an alkaline fuel cell with single or double layer electrodes , 2000 .

[13]  B. Demczyk,et al.  Potential Distribution on a Carbon‐Based Bifunctional Air Electrode , 1982 .

[14]  Jiujun Zhang,et al.  Micro-porous layer with composite carbon black for PEM fuel cells , 2006 .

[15]  Wei Qu,et al.  A review on air cathodes for zinc–air fuel cells , 2010 .

[16]  Bruce E. Logan,et al.  Power generation using an activated carbon fiber felt cathode in an upflow microbial fuel cell , 2010 .

[17]  Yang-Kook Sun,et al.  The roles and electrochemical characterizations of activated carbon in zinc air battery cathodes , 2006 .

[18]  P. Tosco,et al.  Effect of structure of the electrical performance of gas diffusion electrodes for metal air batteries , 2000 .

[19]  Minkmas V. Williams,et al.  Influence of Convection Through Gas-Diffusion Layers on Limiting Current in PEM FCs Using a Serpentine Flow Field , 2004 .

[20]  Subodh G. Mhaisalkar,et al.  Paper like free-standing hybrid single-walled carbon nanotubes air electrodes for zinc–air batteries , 2012, Journal of Solid State Electrochemistry.

[21]  Preparation and characterization of electrochemical properties of air cathode electrode , 2004 .

[22]  Nils Størkersen,et al.  Electrochemical power sources for unmanned underwater vehicles used in deep sea survey operations , 2001 .

[23]  Nigel P. Brandon,et al.  An improved cathode for alkaline fuel cells , 2010 .

[24]  C. Ponce de León,et al.  Redox flow cells for energy conversion , 2006 .