A feasibility analysis of hydrogen delivery system using liquid organic hydrides

The paper discusses the techno-economic feasibility of a hydrogen storage and delivery system using liquid organic hydrides (LOH). Wherein, LOH (particularly cycloalkanes) are used for transporting the hydrogen in chemical bonded form at ambient temperature and pressure. The hydrogen is delivered through a catalytic dehydrogenation process. The aromatics formed in the process are used for carrying more hydrogen by a subsequent hydrogenation reaction. Cost economics were performed on a system which produces 10 kg/h of hydrogen using methylcyclohexane as a carrier. With proprietary catalysts we have demonstrated the possibility of hydrogen storage of 6.8 wt% and 60 kg/m3 of hydrogen on volume basis. The energy balance calculation reveals the ratio of energy transported to energy consumed is about 3.9. Moreover, total carbon footprint calculation for the process of hydrogen delivery including transportation of LOH is also reported. The process can facilitate a saving of 345 tons/year of carbon dioxide emissions per delivery station by replacing gasoline with hydrogen for passenger cars. There is an immense techno-economic potential for the process.

[1]  Andreas Züttel,et al.  Hydrogen storage in carbon nanostructures , 2002 .

[2]  A. Fukuoka,et al.  Efficient hydrogen production using cyclohexane and decalin by pulse-spray mode reactor with Pt catalysts , 2003 .

[3]  R. Biniwale,et al.  Production of hydrogen-rich gas via reforming of iso-octane over Ni–Mn and Rh–Ce bimetallic catalysts using spray pulsed reactor , 2005 .

[4]  M. Latroche.  Structural and thermodynamic properties of metallic hydrides used for energy storage , 2004 .

[5]  A. Züttel,et al.  Hydrogen-storage materials for mobile applications , 2001, Nature.

[6]  S. S. Murthy,et al.  Comparative evaluation of Mg–Ni hydrogen absorbing materials prepared by mechanical alloying , 2005 .

[7]  A. Fukuoka,et al.  Efficient evolution of hydrogen from liquid cycloalkanes over Pt-containing catalysts supported on active carbons under “wet–dry multiphase conditions” , 2002 .

[8]  R. Biniwale,et al.  Efficient hydrogen supply through catalytic dehydrogenation of methylcyclohexane over Pt/metal oxide catalysts , 2010 .

[9]  R. Biniwale,et al.  Dehydrogenation of Cyclohexane Over Ni Based Catalysts Supported on Activated Carbon using Spray-pulsed Reactor and Enhancement in Activity by Addition of a Small Amount of Pt , 2005 .

[10]  Jörg Fink,et al.  Hydrogen storage in carbon nanostructures , 2002 .

[11]  Vinay Ananthachar,et al.  Efficiencies of hydrogen storage systems onboard fuel cell vehicles , 2005 .

[12]  Sukumar Devotta,et al.  Chemical hydrides: A solution to high capacity hydrogen storage and supply , 2008 .

[13]  Hiroshi Arai,et al.  Catalytic decalin dehydrogenation/naphthalene hydrogenation pair as a hydrogen source for fuel-cell vehicle , 2003 .

[14]  Yasukazu Saito,et al.  Efficient hydrogen supply from tetralin with superheated liquid-film-type catalysis for operating fuel cells , 2005 .

[15]  Hiroshi Arai,et al.  Liquid-film-type catalytic decalin dehydrogeno-aromatization for long-term storage and long-distance transportation of hydrogen , 2003 .

[16]  Grace Ordaz,et al.  The U.S. Department of Energy's National Hydrogen Storage Project: Progress towards meeting hydrogen-powered vehicle requirements , 2007 .

[17]  T. Veziroglu,et al.  A REVIEW OF HYDROGEN STORAGE SYSTEMS BASED ON BORON AND ITS COMPOUNDS , 2004 .

[18]  James F. Miller,et al.  Key challenges and recent progress in batteries, fuel cells, and hydrogen storage for clean energy systems , 2006 .

[19]  D. Rippin,et al.  Exceeding equilibrium conversion with a catalytic membrane reactor for the dehydrogenation of methylcyclohexane , 1994 .

[20]  P. Muthukumar,et al.  Experiments on a metal hydride-based hydrogen storage device , 2005 .