Air–water two-phase flow measurement using a Venturi meter and an electrical resistance tomography sensor

Abstract A method for air–water two-phase flow measurement is proposed using a Venturi meter combined with an Electrical Resistance Tomography (ERT) sensor. Firstly, the real-time flow pattern of the two-phase flow is identified using the ERT sensor. Secondly, the void fraction of the two-phase flow is calculated from the conductance values through a void fraction measurement model, developed using the LS-SVM regression method. Thirdly, the mass quality is determined from the void fraction through void fraction-quality correlation. And finally, the mass flowrate of the two-phase flow is calculated from the mass quality and the differential pressure across the Venturi meter. Experimental results demonstrate that the proposed method is effective for the measurement of the mass flowrate of air–water flow. The proposed method introduces the flow pattern information in the measurement process, which minimizes the influence of flow pattern on the conventional differential pressure based methods. In addition, the mass quality is calculated from the void fraction, so the difficulty to obtain the mass quality in conventional methods is also overcome. Meanwhile, the new method is capable for providing concurrent measurements of multiple parameters of the two-phase flow including void fraction, mass quality and mass flowrate as well as an indication of the flow pattern.

[1]  Feng Dong,et al.  Application of electrical resistance tomography to two-phase pipe flow parameters measurement , 2003 .

[2]  Mi Wang,et al.  Electrical resistance tomography for process applications , 1996 .

[3]  S. L. Smith.  Void Fractions in Two-Phase Flow: A Correlation Based upon an Equal Velocity Head Model , 1969 .

[4]  John J. J. Chen.  A further examination of void fraction in annular two-phase flow , 1986 .

[5]  Wang Baoliang,et al.  Design of ERT system , 2005 .

[6]  C. K. Rice.  The effect of void fraction correlation and heat flux assumption on refrigerant charge inventory predictions , 1987 .

[7]  Gary Oddie,et al.  FLOW-RATE MEASUREMENT IN TWO-PHASE FLOW , 2004 .

[8]  J. Suykens,et al.  Recurrent least squares support vector machines , 2000 .

[9]  D. Butterworth,et al.  A comparison of some void-fraction relationships for co-current gas-liquid flow , 1975 .

[10]  Johan A. K. Suykens,et al.  Least Squares Support Vector Machine Classifiers , 1999, Neural Processing Letters.

[11]  Zhang Tao,et al.  A comparison of correlations used for Venturi wet gas metering in oil and gas industry , 2007 .

[12]  A. Ghajar,et al.  Comparison of void fraction correlations for different flow patterns in horizontal and upward inclined pipes , 2007 .

[13]  Xia Li,et al.  A New Method for the Online Voidage Measurement of the Gas–Oil Two-Phase Flow , 2009, IEEE Transactions on Instrumentation and Measurement.

[14]  D. Chisholm.  Research Note: Two-Phase Flow through Sharp-Edged Orifices: , 1977 .

[15]  R. N. Steven,et al.  Wet gas metering with a horizontally mounted Venturi meter , 2002 .

[16]  Stephen J. Neethling,et al.  Electrical resistance tomography using a bi-directional current pulse technique , 2001 .

[17]  Z. Lin.  TWO-PHASE FLOW MEASUREMENTS WITH SHARP-EDGED ORIFICES , 1982 .

[18]  R. Lockhart.  Proposed Correlation of Data for Isothermal Two-Phase, Two-Component Flow in Pipes , 1949 .

[19]  Christian Igel,et al.  Evolutionary tuning of multiple SVM parameters , 2005, ESANN.

[20]  J. W. Murdock.  Two-Phase Flow Measurement With Orifices , 1962 .

[21]  S. Zivi.  Estimation of Steady-State Steam Void-Fraction by Means of the Principle of Minimum Entropy Production , 1964 .

[22]  Chih-Jen Lin,et al.  A comparison of methods for multiclass support vector machines , 2002, IEEE Trans. Neural Networks.